Creo+ and Creo Parametric

I found this video from SolidEdge, and I found it very usefull   https://youtu.be/pPCrpZyi1RE?t=272   This video from NX with samething https://www.youtube.com/watch?v=oEeNlSsp5e8     Basically, on a surface or a quilt, it's possible to create a curve with an angle from a reference, like a shadow. How to create it in CREO?    

I am using Creo Parametric - Release 7.0 (connected) 7.0 7.0.2.0When using Simulation Live for a structural analysis of an assembly what spacing is required between the parts so that they are not considered bonded together. It appears that I need more than 0.1" before they are treated as not bonded together. Is this accurate? Can it be changed? I work with parts in the size of a handful of inches and this gap can make significant changes to the design in order to get the parts to behave as not bonded together.Thanks,Chuck

I am using Creo Parametric 7.0 7.0.2.0Every time I save a drawing I get this “Model Check Report” blank dialog window that opens on the left side of the screen and doesn’t close until I hit the “X”.Here are the errors that I faced Blank Model Check Report.

Hello everyone,I wanted to copy a measured value and pasted to txt file, however, I failed, first, I right-click the value area (1874.84 shown in Figure 1) and click ‘copy’, then I pasted the value in txt file, but there is nothing to be displayed, I do not know why this happens?Any advice will be highly appreciated, thx!Regards, Figure 1  

I am using Creo Parametric 2.0 F000最近两天在退出机构界面的时候 会导致电脑系统崩溃，要重启电脑才可以。   ---------- Quit creo 2.0 causes the computer to crash I am using Creo Parametric 2.0 F000   The computer system will crash when exiting the organization interface in the last two days, and the computer must be restarted.

Hi,   i have all set up VB api in my pc along with i have marked vb reference in creo as well but when i try to run below code i am getting error;   'globale Variablen:Dim asyncConnection As IpfcAsyncConnectionDim cAC As CCpfcAsyncConnectionDim hSession As IpfcBaseSessionDim hCurMdl As IpfcModel Function Connect2ProE() As BooleanSet cAC = New CCpfcAsyncConnectionSet asyncConnection = cAC.Connect(Null, Null, Null, Null)Set hSession = asyncConnection.session Connect2ProE = TrueEnd Function Private Sub but_connect_proe_Click() bProeConnect = Connect2ProE() End Sub     your help really be appreciated. Thanks  

Hi Folks!   When creating a HSM roughing NC sequence I've set the config option mfg_param_auto_copy_from_tool to 'all' but the finishing speed and feed data for the selected tool are written into the parameters, not the roughing ones.  If I create a Rough or Volume Rough sequence it imports the roughing speed and feed as I would expect.  Am I missing something or is this a giltch?   Thanks in anticipation,   Clive

Hi,   The toolkit get resource(TEXT_DIR) only once when a start Auxiliary Applications for one.So another toolkit app can not get a resource(UI files, msg_file, etc..) they need to start or use it.   Because "Second-TKAPP" starts after "First-TKAPP", only the resource of "First-TKAPP" is obtained, not the resource "Second-TKAPP".   As the toolkits are launched in different locations, is there a way to get their respective resources?   Thanks,Warm Regards,SeonHo Cha.

I am using Creo Parametric 3.0 M190In trying to run parametric in a script, it fails to start. Also, the CS116805 support doc seems not to be available:Note: This article 116805 is not customer visible.Here are the errors that I faced application error: exception : ProEngineerStart returned ProError: PRO_TK_GENERAL_ERROR(-1), proe_path: "C:\Program Files\PTC\Creo 3.0\M190\Parametric\bin\parametric.exe" -g:no_graphics -i:rpc_input "C:\Program Files\PTC\Creo 3.0\M190\Parametric\bin\parametric.psf" %*, prodev_text_path: . Creo may fail to start if the Welcome screen has not been disabled.Start Creo manualy and check "Do not show again" in the "Resource Center" window. See also https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS116805

We are currently running a DELL M6800 Precision laptop with Windows 10 Pro, 64 bit, SSD, Intel i7-4810MQ CPU, 32 GB RAM and a NVIDIA Quadro K4100M Graphics card.   We have had this for several years and are looking at getting new laptops.   Our company will only but DELL laptops.   I have looked at the Support Platform documentation at PTC.com for CREO 4.0 and CREO 5.0 but I cannot find any certified DELL laptops using Windows 10.  The only DELL workstations are towers.   Anyone have suggestions or a list of PTC Certified DELL laptops running Windows 10 Pro 64 bit?

Hello   I want to create a UDF to automate engravings. The engraving consists in the Extrude of a text value, having a hole and 2 planes as references. I was able to create the UDF, and automate the engraving, but I want to be able to have the text as a variable that I can change when running the UDF. Ex: IN1, IN2. IN3.... Is this possible?   Thanks      

Is it possible to save my list of tools in pdf format or print?

So basically I was using Creo 4 and use to have the minitoolbar for AFX and IFX now I'm on a brand new install, and I missing both. What do I need to do to bring back the minitoolbar for buw products?

I am using Creo Parametric 3.0 M140When we work on a drawing a user get an EXCEPTION_ACCESS_VIOLATION errorWe get the error when:"I open a .drw file, with views, notes, tables and dimensions inside, I copy a table and paste it, then I try to position it and the error appears.• I open a .drw file, with views, notes, tables and dimensions inside, I create a section and the error appears.• I open a .drw file, with views, notes, tables and dimensions inside, I try to open another .drw file and the error appears before I even open the file.• I open a .drw file, with views, notes, tables and dimensions inside, I try to open a 3D file and the error appears.• I open a .prt file, try to open another .prt file and the error appears."Here are the errors that I faced The trace creation timestamp is: Mon Jul 12 15:27:06 21The executable build timestamp is: Mon Jul 24 15:19:28 17The datecode is: 2017170The pro machine type is: x86e_win64The process ID is: 12488The traceback type is : CRASHThe logger

Hi All, I've searched around a bit with no luck thus far. Hopefully this is an easy question.I'm analyzing a mechanism similar to a universal joint with an output shaft angle that differs from the input shaft angle. My current goal is to plot input angle vs. output angle.I see angular velocity as a measure in mechanism, but not angular position / rotation. I've set up a user defined measure for angular position based on x displacement & some simple trig, but this obviously isn't accurate once you change quadrants. I could set up a more elaborate user defined measure to account for this, but it seems like there might be a better/easier method for angular position measurement in mechanism?Thanks in advance.

I have a problem placing a UDF with a reference that is not contained in the parent part.Let's have a look at the following code, which is working as expected:   pfcAssembly_ptr assembly = pfcAssembly::cast(session->GetActiveModel());logFile << "assembly: " << assembly->GetFullName() << endl;   pfcSolid_ptr skeleton = assembly->GetSkeleton();logFile << "skeleton: " << skeleton->GetFullName() << endl;   pfcFeature_ptr partItem = assembly->ListFeaturesByType(false, pfcFEATTYPE_COMPONENT)->get(1);pfcModelDescriptor_ptr desc = pfcComponentFeat::cast(partItem)->GetModelDescr();pfcPart_ptr part = pfcPart::cast(session->GetModelFromDescr(desc));logFile << "part: " << part->GetFullName() << endl;   pfcModelItem_ptr sketchItem = part->GetItemByName(pfcITEM_FEATURE, "SKETCH");logFile << "sketchItem: " << sketchItem << endl;pfcSelection_ptr selection = pfcCreateModelItemSelect

CREO的config.pro可以通过session.SetConfigOption来更新， 比如一下工程图的配置也有类似的方法吗  

I am using Creo Parametric 3.0 M040'BQ1378M_BODY_WELD_NECK_DN40' After purging the working directoryI am not able to open the drawingHere are the errors that I faced 'BQ1378M_BODY_WELD_NECK_DN40' cannot be retrieved

dear all, please let me know how to add stop disc MH and stop disc FH of same supplier in mould base definition file.I will save this assembly definition file for reuse. I will use different types of part (model)  for stop disc MH and stop disc.   when I am downloading the preset mould assembly (what I configured) I can see only top disc MH in my mould assembly. stop disc FH is missing. am I doing something wrong? please advise. I am using emx 13.0.0.0

Hello Community,   I am working on EMX 12.0.2.0 We have issue regarding Fastener size in BOM. I am using d-m-e STD supplier in which M series screws, which are M5, M8, M10 but when i am exporting a BOM, Fastener size calculated by its head Diameter. We need (M5 x 15) M-series in BOM size column.   Similarly it happen with ejector pin also.   Please find the attached Image FYI.

Hi Guys, can someone tell me if i can stop these 00_BUW layers from being created when i make an EMX moldbase?   I thought i could go into each plate and component, and get rid of them, but they still show up once I hit Assembly definition button. And then i get more once I add in mold plates.    Is there a config hidden somewhere? Or am I stuck with these everytime I use EMX?    Thanks, Jay

Good afternoon   I am running Creo flow analysis with a heat air coolant heat exchanger. However when I try to run the model after meshing I receive a dialog box that states "bad allocation". What does this mean exactly? 

I am using Creo Parametric 3.0 M110I am using Creo Parametric 3.0 M110Unable to delete the outdate feature.

     We need a resolution in Creo Parametric 8.0 for a chain assembly.      We want to assemble a chain in a curve using a curve pattern. But the pitch distance is not equal in the straight line and in the curved path. It is the same along a straight line and varies along curved paths. This is critical assembly and so we should assemble the chain as exactly as they are in real assembly. How to assemble a chain in a curve using a curve pattern without changing the pitch value?   1) There may be a lot of ways to assemble the chain links in a curve. But chain assembly is used universally and so there will be a simple solution to do this (For instance, pattern). So, we want to assemble the chain links using "pattern" along the curve or else a very simple method to do this. Because for a long chain assembly we could not assemble multiple times or go for a lengthy process. 2) There is a way to do this using "pattern". While we search on the