Creo+ and Creo Parametric

Bonjour, Je viens tout récemment d'installer le logiciel, et j'aurais souhaiter savoir si il était possible de passer son interface en français? Merci par avance pour votre aide.

Hi all,   I have a drawing program (see below), and the attributes/parameters who are created automatically are not "designate" within the parameters table of the drawing.   Do you know a way to make these attributes "designate" automatically?   Drawing program: PRODUCT_CODE:D=PRODUCT_CODE:MDL PRODUCT_CATEGORY:D=PRODUCT_CATEGORY:MDL   Thanks a lot for your help! /Jonathan    

need to show a column for flexible parameter value in model tree for multiple occurrences of a part in an assembly. when i add flexible parameter to tree columns it is showing constant value for all occurrences.

If nothing is set in the config.pro global_appearance_file pro_colormap where is the appearance.dmt being read from? It is reading an old dmt file I created and I cannot find it. Your help is most welcome Danny P.  

Anyone know how to export STEP file of an assembly with the model tree names that will import to other software(s) (Inventor, Maser Cam).  Once imported the model tree names are not the same as what I exported? Any thoughts?  

Hi, i am having an assembly , which needs to be pattern following  oval curve. when i tried to constraint assembly and pattern it. it goes away from curve on one side. any suggestion how to constraint and how to make the pattern to follow curve 

Is there a way to change the line style of this annotation to solid?

My company is looking to implement intelligent fasteners into our assemblies. We have a standard part numbering system for all the fasteners we use.    The issue is that we have hundreds of existing fasteners already stored in Windchill and our assemblies. Most of these are just cad downloaded from the internet (not IFX).    Is there a way to easily implement intelligent fasteners into existing assemblies with fasteners (a way to replace all our old cad with the intelligent fastener cad)?

In the large Assembly, when you need to simplify your drawing view, the layer technique is the best option to deal with component visibility. Find out more in the video. Hope you find it useful, I will look forward for your comments, Thanks.

Community,   I have encountered an unusual problem in a drawing.  I have an assembly that consists of only solid components, and when I added the model to a sheet, it uploads with no problems.  However, when I add a wire harness to the assembly, and upload the assembly again, the assembly is extremely small.  When I suppress the wire harness, the drawing returns to a normal size.  Has anyone encountered this type of problem and is there a solution?  Thanks in advance.

While creating a assembly drawing I am getting too many sketches displayed (in Pink and blue color) inside every views, its child parts are created with many features like merge, surface extrusion, cosmetic sketches etc.,   From top level assembly how can I hide all these sketches using layer and rules? instead of finding actual child part and hiding its sketch feature.

i have both creo 6.0 and 5.0(EDU) installed, when i insert mm/DIN fastener it seems to be fine, but if i choose ANSI bolt like 6-32 Socket, it will say csdd.prt not found. i did navigate this file, it's not in  ifx_fastener_data forder  but in prolibrary. i want to know how to add path of prolibrary with  ANSI standard to IFX, or how do i merge  all prt files from prolibrary to ifx_fastener_data folder. 

Wanted to copy a file without the flat pattern being linked to the original file, Any idea how to do so? So when I copy the file, I can create A new flat pattern.   Currently using Creo 2.0, Am a student

I want to know whether we can use the sketches saved in session or not.

Hello, In Creo 5, there is a part that has been modified in my workspace that I did not modify.  I have attempted to update this object to override this modification with the latest version in PDM and Creo is preventing me from doing this.  What am I doing wrong here?

Hi all, Would really appreciate if someone can shed some light on this.   Created an assembly in Creo Parametric 5, called it STATIC.asm (has A.prt and B.prt with A and B being FULLY constraint with one another) Created an assembly, called it RANDOM1.asm (has subassembly STATIC.asm in it) Created another assembly, called it RANDOM2.asm (also has subassembly STATIC.asm in it) Now the problem. When I opened RANDOM1.asm and break constraint between A.prt and B.prt in the subassembly STATIC.asm (break the constraint and move A and B apart), this action is automatically reflected in both RADOM2.asm and STATIC.asm. (i.e A.prt and B.prt are no longer constraint and are now pulled apart in both RANDOM2 and STATIC.asm) Is there a way, to break the constraint between A.prt and B.prt in RANDOM1.asm and still keep both STATIC.asm and RANDOM2.asm intact? I’m only 3 months new to CAD, so please try to keep explanation simple if possible. Thank you

Hello every body i am trying to run an optimization study in creo simulate.i takes a very long time and keep the (running) button active all the time and no results appear.can any body help me?thanks

Quick video tutorial - How to use Collapse feature    

I had created the recipe editor as per the PTC case   https://www.ptc.com/en/support/article/CS286532   and got created the pvz file successfully but when i imported to creo illustrate i was not able to succeed with right view for states.   1. opened the creo view 2. import creo view file 3. got the list of mbd states in it 4. new picture and selected the required mbd states but creo illustrate was not positioned the view as per the creo mbd state definition. i did it manually. the same reproduced in vuforia too. not positioning as per mbd definition.

Hello, Looking for help with Pro-Program IF statement.  I have a part model that has 2 different bolt hole patterns.  I would like to turn off or suppress the larger bolt pattern when the diameter is below a certain size.  For instance; If diameter d37 <= 5.500, turn off or suppress pattern 2, else leave pattern 2. I greatly appreciate the help, Steve

Hello, I am using CREO Parametric 5.0.2.0. I performed simulation of frame, made in Framework, in Simulate Lite (as picture bellow) and everything went fine.   But when I moved middle beam, so the surfaces of all beams are coplanar, I get error (pictures bellow).   As I understand it right, it is because I moved beam out of its original axis and now Simulate considers this beam as non constrained to other beams. Is there any solution, so I do not have to move beams to their original positions, every time I would like to perform simulation?      

Some of my day consists of taking standard parts and making specials.Typically this is just simple length changes per the customers requirements.The question I have is with the way the drawing handles length changes.If you have a partial view and the length is changed, why does the centerline and dimension not move with the end of the part relative to where they had been to the standard part?The first drawings shows the part from the standard drawing.The second drawings shows the part when, in this case, the part was made longer. The centerline of the notch of the tube is now where the end of the shorter, parent part would be given the new length of the part. Why does the centerline and therefore the dimension stay relative to this portion of the part that is in the view? This happens on several parts and several drawings when a part is either lengthened or shortened for a special.If you had any suggestion how to keep the centerline relative to the portian of the view shown, I would ap

I'm fairly a beginner for both Cabling and Schematics and need to help company up these programs to fit in the work flow. I have encountered several problems which are not able to find solutions through PTC support manual:   1. How to use terminator table/other methods in Creo Schematics to map out port/pin parameters value? Such as I would love to assign terminal name, seal name and signal name to several connectors, I could not apply it while making the connector artifacts because these parameter values vary with different harness, is there an easier way to do it?   2. I also try to use terminator table in PCX, but it's not working. I didnt save the port artifact I instanced on connector artifacts in the central catalogue and did not define terminal names while routing the wiring diagram, what's the potential issue here?   3. I want to have a BOM table which will give all parts assembled in the harness assembly (housing, locking device etc.), terminals & wire seal

My company uses drawing templates to help maintain consistency with company drafting standards. If our standard notes need an update, I have to update all of our drawing templates (we have about 15).    Is there a way for a drawing template to pull its notes from a file?    In this way I would only need to update the notes documents?     Thanks,   Bob

I set few parameter in the part. but it fail to show in my drawing. if i use "note" key in my customize parameter , it able to show. but it just can not show in table.      possible to advise , how to solve this problem.