Creo Elements Direct

Hi  We need to delete multiple sheets in Annotation. We have Models with up to 35 Drawing-Sheets.   Many thanks Urs Ammann 

Hello,               Please let me know, if there is a same option such as Intelligent Fasteners in Creo 2.0 . If yes, please let me know how to activate that module. Also, is there a method to Extract Fasteners details of a assembly, without assembling the Fasteners in the assembly. For Example based on the Type of hole sizes in the Model.

Hi,   Can anybody help me out for adding custom frames in CED Annotation file? I tried the method suggested by PTC Tech Support but did not work in my case. I tried below method of changing the am_customize file as below   ;(docu-register-frame ;    :UI-name "Custom-A3";    :Wm-name "" ;    :file "C:\Custom_Frames\Custom_A3.mi";    :default :every time)     ;; T/NIL/:every time     But this did not work. Still the same standard Letter sizes and A0.....A4 sizes are showing.   Please help....

Hello everyone, I'm new to Creo software and we need some advice on which software can work with our client's workflow. The client provides us with PKG files, we need to turn on/off visibility of components and then export it as STEP Files.  We don't need modeling capabilities, and the client will like to avoid allocating time for the conversion process, and at the same time it's on our side to select what really needs to be exported.   We tried the Creo View and the PKG file format is not supported.  Is there any other option? What other format is lightweight and easy for them to save as from Creo modeling that we could use Creo View to export?   Any guidance will be great. Thanks!

Dear all,   regarding to PTC-article CS122349, i would like to suggest, that it would be a benefit, to create dimensions on every geometry which is shown in a CreoElements Drafting file. In the moment shared-shared parts can not be dimensioned but they are also part of geometry in a drawing.   Best regards   Sven Brüschke/Herrenknecht AG

Hello i just setup PTC Creo Elements Direct Modeling Express 6.0, I'm registred. But at the launch softwer ask proxy.   After input no proxy i can get possibility to activate manuelly for 72 hours and software give me a code but each time the code isn't valide.   Can you help me

Is it possible to update the BOM list automatic when a new part is inserted to the assembly? Now the users need to do the following: - Insert the part in the assembly (or a changed part) - Scan the BOM - Delete the old BOM - Place the BOM again on the drawing   Isn't it simple the part is added to the BOM automatic?

Our current workstations have 32 GB of memory. When loading a large assembly from Model Manager I find that SolidDesigner appears to limit itself to using less than 10 GB of memory (see the first screenshot below). The wave pattern of memory usage looks like the software needs more memory but instead of taking memory that is available it is dumping some memory already in use.   I have a new workstation that has 64 GB of memory installed but SolidDesigner still appears to limit itself to under 10 GB of memory when loading from Model Manager (see the second screenshot below). Is there a setting somewhere that is limiting how much memory Creo can use? I was hoping to see an improvement in load times with this new computer but I am not seeing improvement.    

Product idea for dimensioning in Annotation: Please add multi line postfix in dimension tolerance type "Basic". We need this for multi language drawings.

If I create a parallel auxiliary line, I can select the line in Modeling and move it with the mouse. Then I see exactly the unit of measure dynamically. I can enter an exact measure and press Enter at the same time.The line is created. When I click on the button to create parallel auxiliary line in Drafting, I also see the measure dynamically, but I have to leave the command if I want to enter an exact measure. Double work. Could it possibly do the same as in Modeling?

Hallo lieber support, ich hätte mal eine frage. ist es möglich Creo Elements/Direct Modeling 19 als Studentenversion zu aktivieren? ich habe zwar das creo direct 4.0 aber das ist leider nicht das was ich brauche mfg Eduard 

Hi,  How can I export pcb componets to emp file from CED ? Because I exported Emn & Emp file from CED , I only see board and keepout. I couldn't find any componet export Below image   Thank you

If you modify a part within an inseparable assembly, the modification state of the inseparable master is also updated. If you store the recently modified parts of an inseparable assembly using Save Modified, the whole assembly is stored. The modification is done by adding an additional view. As a consequence all views of the inseparable and the sheet gets the state “update needed”.   This behavior, in some situations, is not the best, because to update assembly views may require several minutes

I think by now 4 to 6 weeks have passed in which the license server for Modelling Express is down and the only way to continue working with it, is by requesting a manual activation key every per 72 hours... until that option will eventually fail to work as well.  I don't know how many users will then have no longer access to their design, but I guess quite a few!    Which would be a pity because this application is by far the best I know of for enthousiast amateurs who want to make semi-professional 3D-printable one-off designs. At least that is why I love it in the first place. It even works so well that I strongly believe I could have been a huge success, if actively promoted and supported for the 3D printing communities.   But that will never happen to it as long as PTC treats it as the black sheap of the familly. Without any means to get support or even the right to contact PTC by email it looks the only thing PTC wants with it is to die slowly (and painful

As the title suggests, I need to be able to customize the title block in creo elements. I go to the Annotations tab and create my drawing sheet with a perspective part. However it has a default title block that I want to change (how big the rectangles are as well as how many there are) so that it has all prevalent information I personally need. I have not figured out how to create my own title block like in creo Parametric.    Can someone let me know how to do this in detailed steps?  Thanks

Hi, we need a function to load a part from the catalog. Then we will position the part multiple. (without a liner or radial direction). Now we have to use "next" and "edge". Thats slow. Kind regards Urs Ammann   in german: wir möchten ein Teil aus der PartLibrary laden und dieses dann mehrfach absetzen. Ohne dazwischen immer wieder "Nächste" und "Kante" anzuklicken.  

Hi All, I'm experiencing continuos Proxy Error when running Direct Express : what's the matter ? Can you help/support/correct ?   Andrea

Hello guys,   For the past few days I have experienced some unusual for me graphics problem with a schematic. I will attach a picture to provide more visual info. The system I am currently using is AMD Radeon Pro WX3100 and Intel graphics UHD 630. The platform I experience this problem is on HP Zbook i7 8550U.   Any feedback is greatly appreciated

Hi all, when I try to add material to a part it gets hollow. Only contour is shown. What am I doing wrong? Anar

Hi, I am getting this error message when I am trying to add material. What does it mean? Thanks for answers. Anar  

Hello.  I use your demo version of Creo Elements Direct Modeling, but it is not working lately. I can’t open it. When I enter name and password it asks me about proxy server what I don’t know. It ran good but now doesn’t. Can you help me with it?

Hey.    I am having issues forcing my dimension text to stay in line with my dimension lines. I turned my common text orientation to perpend and the coordinates to use orientation. This handles the text and line issue but then creates issues with my diameter and radius not having the staggered line.    any ideas?

This is pretty simple, I keep getting the error, "Edges define an invalid mesh" when I try to create a skin from a spline.  The spline is connect all the way around and there are no duplicate lines.  I can't for the life of me figure out why this is not working. I have attached the package file with the spline. Can someone please help?

Marco,   That is interesting. The login I use is of UK origin, but since PTC themselves are a German company I would have expected them to show a more professional approach to GDPR than just cutting all communication with us. I had tried again to use a 72hour key just before I saw this post. As usual, I am informed the key I receive is invalid. Bill

In sketch green colour entity, dimension and blue colour what it indicates.