Creo Modeling Questions

Hello, I learned a bit about wildfire last year at school and I was hoping someone could help me find a version

hi everyone,Is it possible to operate a mapkey automatically or by a Pro-program??e.g I have a parameter called ABC and a mapkey called XYZ. if ABC = Yes than the mapkey XYZ will run otherwise not.please help me if anyone knows this.....

This seems like it should be fairly simple - go to "open" and bring in a *.pts file. But when I go to bring in a file, Creo doesn't even see the files, regardless of whether I tell it to look for all or just "*.pts". I've seen the actual physical data in the file and I can access it both in notepad and excel - in both cases, the coordinates are separated by spaces and not tabs. I've included sample data from the file and I'm not sure why I can't pull it into Creo. I'm also uncertain what that first line actually is (I think it's a count of the total number of points) and I'm wondering if just deleting that will solve my problem.2473035 2.3026 1.4849 -0.1258 -9552.3131 1.4998 -0.1283 -11162.3155 1.4994 -0.1284 -10842.3175 1.4988 -0.1285 -9872.3236 1.5006 -0.1288 -7952.3249 1.4993 -0.1288 -6662.3205 1.5066 -0.1305 -11642.3291 1.5102 -0.1310 -9872.3284 1.5078 -0.1309 -9072.3294 1.5064 -0.1309 -7302.3332 1.5068 -0.1311 -3452.3285 1.5016 -0.1307 -4412.3266 1.5105 -0.1326 -11322.3281 1.5095

here is what I am looking for. We have not had any luck creating this.20 tooth involute spline16-32 pitch flat rootSide fit 30 degree pressure angle1.312 major diameter1.250 pitch diameterANSI B92.1 1970/6Thanks

So i am looking for a few things here. 1. How do i remove the hole table title or change it to something more applicable then Hole chart....2.is there a way to get teh hole tables to show more intelgent hole data based off the internal hole data from the hole coman?3. Is there a way if i cannot edit the table correctly to lock a new table onto the end of the hole table and manual fillin the cells. 4 is there a way to not have the hole labels return to default location when i updae the table?ThanlsDonSorry if these seem like very basic questions but i just resently came back into working with PTC products and am trying ot work my way through the bumps i am coming across in the road.

Do PTC products talk to STAAD and if so how ?Thanks

Hello allDoes anyone know the meaning of the icon highlighted in the screenshot?I looked in the documentation but without success ...Have a good day and Thanks

Hi I created the below note by using parametric method. Now I need to remove the symbol infront of zero. Will any one help? Thanks....RegardsElan

Hi allI changed m creo/elements browser to mozilla based,it was working well and good,but suddenly a day became it displays blank when i go to Windchill, other websites are running normal like 3D model space. My windchill and folloeing website http://www.ptc.com/community/landing/creo-elements-pro/start.htm also not loading properly, for the given link website doesn't show any image just showing words only. But when i open the mozilla browser indvidually the given following link works well.My question why the windchill loads and doesn't show the contents on page in creo/element browser? and i have attached for your reference how the web page have loaded when opening windchill and following link in mozilla based browser.please advice and help me to sort out this issue.Thanks & RegardsViswanathan.K+919940589005

Hi - I'm brand new with 3D modelling. Have been playing around with Element/DM Express and getting used to the tools and capability.One thing I don't know how to do is create a hollow door handle. I want to build in the following aspects which is what I'm finding difficult:I want a curved handle that comes perpendicular out of the door and sweeps through to the handleIt needs to be hollowIt needs to be split horizontally so that the top and bottom parts come away leaving me to build in some internal workingsI also want to build various dips in the handle profile where your fingers wrap round.Can all of this be done in DM Express?If so, can someone point to any tutorials that I can watch that helps me make the above model? They can be 4 separate tutorials.Or can someone give me some clues on how to create or tools I need to use?ThanksArjay

I’m looking for a five button mouse to use with Pro that will support double clicking with the thumb button. I prefer a corded mouse, but that's not required. Does anyone have any recommendations? Thanks in advance!

Creo Community, I just installed build M050, and normally I copy my customization uifile (creo_parametric_admin_customization.ui) to :C:\Program Files\PTC\Creo 2.0\Common Files\<build>\text This is not working. Any ideas? Brad

Hi i'm beginner in creo 2.0. How to create a bottle with finger gripper & hollow inside using swept tool.

Long shot, but anyone come across a setting to turn off "Do you really want to cancel?" dialogues? Even a default to Yes rather than No would at least let us MMB to accept,

Hi All,I am implementing api for getting geometry information from body of given model.I require to find whether given point is on body ? inside or outside ?.so how to get this point containment information from prosolid ?thanks in advance

I like some help with creating an inductor toroid coil as seen here in the attached picture.

People, I know this is a long shot but does anyone have a 3D model of aSumitomo cold head, model RDK-415D.Many thanksColin

Does anyone know how to save text styles that have been created? They were carried over from my Wildfire 3 template but it keeps changing the font from blueprint to win_font. Any help would be appreciated.

Hello,Has anybody had any problems with IE 10 with Windchill 10.0 M030? PTC only supports IE 7, 8 and 9.Thanks,Mike PinkneyWindchill/CAD Admin.Triple Ring Technologies, Inc.

Hi,I am developing API which displays some geometry in Creo.I have a GUI which is on different thread and calls creos API for displaying some geometry in creo.following is the codeProPoint3d point1;ProPoint3d point2;ProError err; err=ProGraphicsModeSet(PRO_DRAW_COMPLEMENT_MODE,&old_graphics_mode); point1[0] = 0; point1[1] = 0; point1[2] = 0; point2[0] = 1000; point2[1] = 0; point2[2] = 0; ProGraphicsPenPosition(point1); ProGraphicsLineDraw(point2); err = ProGraphicsModeSet(PRO_DRAW_SET_MODE,&old_graphics_mode);I am not able to see drawn on creo window.Is it possible to draw something in creo from different thread ?if yes then what is wrong with above code ?

Hi Friends,I have been creating symbols for electrical component.I want to add a two nodes with same name. I have tried it with using special characters too, Pro-e could'nt allow to do.Please find atached picture of the required symbol with pin locations (nodes).If anybody know how to overcome this issue, please let me know, It would be helpfull.Thanks,Santosh

New to teaching PTC/Creo at the High School level. I have found plenty of tutorials and projects, but I'm trying to put the whole thing into a logical, sequential approach to enable students who don't have a clue what CAD is to be able to start from scratch and after 3-4 months be able to get around on the software and be productive, while at the same time ENJOYING the process. Anyone currently running a High School program that would be willing to pass alone an outline of curriculum? Much appreciated.

So, I have no end to the problems in trying to check in dwgs/models. Especially since Windburn wants to check out and change EVERYTHING, instead of only the objects I actually change. From the Windburn screen I had no end to the problems, and 2 full days of wasted time and countless re-boots. Then, I try and check in the file while in Pro/E, and it (supposedly) worked quickly and easily. Huh???Why is the Pro/E side of it a LOT less problematic? More like the way it SHOULD be?

Creo 2.0 M050 maintenace release date has changed to 26th april.PTC says..it has been changed to bring the best possiblle release...well that is good news.

0.i recommend this sitehlq