Mathcad

I can see that most software uses 2 parameters for the gamma function, while Mathcad uses only one. How do I understand this? Is there any way to make an equivalence?

I recently purchased the mathcad prime program. I work on multiple different devices, all are owned and used by me. Is there a way to access my software license on multiple devices without paying more? I believe I have a  node locked license and not a server hosted license. If I am able to access the license, how do I set it up? Thank you in advance.  

Can anyone help me. How do I do double interpolation of the Cf values highlighted?. I can do the interpolation twice every time But I want to create a quick sheet that I can just change the values in the matrix.    

Is there a setting I can change to make mathcad auto complete my units and previously defined variable names like Smath? I found that to be a really useful feature and I would be very dissapointed in this program if it isn't capable of a feature like that.    

If it is possible to export highlighted equations as an image file - then how is that accomplished?

I'm currently testing Mathcad Prime 11 with its new converter from Mathcad Prime to Mathcad 15.Look in the attachment what I get.  

I want to open the file with Mathcad Prime 5.0, but it doesn't work and failed. And I found the web page to solved my problem. It's still failed, how do I suppose to do?   The file was created by Mathcad 15 M045.   Please~ Thank you so much!!!         Error "Conversion Failed. Conversion cannot be started because a previous version of Mathcad is running. Close the other version before converting the file" in Mathcad Prime   

Hi. if someone could help me with the file attached? I have the same issue as the original poster in this topic. Thanks! ---  This question was originally posted in this topic.

Hii! I'm having an issue with the following equation. The resulting value should be 3. But Mathcad shows it as 2.731.It leads to the least resultant value in the further following equations.Can anyone suggest to me the possibilities of getting the correct result?  

Hi, I'm facing an issue while converting the unit in Mathcad. Here I attached the issue. This was the resulting value of the corresponding equation. But I need the value in N/mm^2.If I change the unit, it does not result properly. The resultant value should be in N/mm^2. Can anyone suggest the better way to solve this issue?     

I am new to mathcad, could someone explain to me why I get this answer?  My calculator tells me it should be cos^-1(0.625) = 51.32 Any explanation or advice would be greatly appreciated.thanks,James 

Hello, I have a perpetual license for Prime 2.0 but do not have the installation file. I see that it is no longer available for download but I need to install the software on a new hard drive. I do have the license file, I just need the software.I can't find any way to email support directly with this request, can anyone help?Thanks in advance.

Hello, I would like to solve a system of equations, but I receive the error "The symbolic result is too large to display". I need the symbolic result, because I would like to calculate the parameters of the electric circuit for which I wrote this system of equations. I'd appreciate it if you could help me with this issue. I have attached the relevant file. Thank you.Marius  

 

I would like to solve a non-linear equation for the maximum value.  The equation has 2 dependent variables and the solution represents the maximum value for a given number of independent variables. (see equations below). The dependent variables are initialized at the start of the solution and the largest values of Ka and Kp are calculated for the independent variables. I will try the solve block solution with 2 guess variables and see how the results compare to the published solutions.  I would appreciate comments/suggestions if there are other methods of solving the equations.    

My Mathcad 14 files became distort after I got the bigger monitor. Text regions shifted from math regions. Why that happen?Thanks, BR  

Hello everyone!I have been looking into the transient in this passive circuit for some time. However, I see that the theoretical results do not coincide with those using the TABLEAU matrix. As you can see at the end of the worksheet, the denominators are slightly different i.e. L1^2 is missing. Why. Whoever finds the source of the problem is really good.Thanks to anyone who can answer.Greetings.  

How do I give someone access to Mathcad portal?   

clear(all) ?        

I am working on a simple harmonics lab where I need to produce four graphs. I am attempting to graph position as a function of time, acceleration as a function of time, velocity as a function of time, and total energy as a function of time. I have inputted the formulas into Mathcad, as well as inserted the plots.  When attempting to plot the functions, Mathcad produces an error stating that the value on the x-axis must be a real number. (The error is on all four plots)      I have attempted to fix the error by changing the values for t, switching the x and y axis, using T and solving T/20 and 5*T and then inputting those values in for t, as well as working with a few different tutors, but all attempts have not corrected the issue.  Any assistance would be greatly appreciated.   

This is a programming made in matlab I am interested in knowing how this would be done in mathcad more than anything [~,~,CG(:,1)]=unique(Y); this operation, is it possible to do this in mathcad? %CG=zeros(nod,3);%-----------Main Coordinates------------------------------------ --------------------------------------[~,~,CG( :,1)]=unique(Y);%index of unique values in YCG( :,1)=CG(:,1)-ones(assent, 1);ngl=max(CG(:,1));%----------Secondary Coordinates------------------------------------- --------------- --------------- --------------- ----- -CG2=zeros(2,nod-nr);for i=1:(nod-nr)*2ngl=ngl+1;CG2(i)=ngl;finalCG(nr+1:size(CG,1),2:3)=CG2';return   Translated by Andra Chirila using Google Translate on March 23rd, 2023----------------------------------------------------------------------------------------------- Esta es una programacion hecha en matlab me interesa saber como se haria esto en mathcad mas que todo [~,~,CG(:,1)]=unique(Y); esta operacion, es posible hacer esto en mathcad? % CG=c

Can you please tell me if the symbolic math function and symbolic solution feature is still active in the "Mathcad Express" version?

Hi All,New user / buyer of this system where I just got a license.I have an error in activating a license that says that I have reached the max number of license requests available for your product type.Can someone help please?

Hi - I have been using MathCad since ~2002. Over the years, I have grown to love the program and have resulted in literally hundreds of sales of the product now that I am a professor. I (used to) require my students to purchase it for my classes. I continued that practice this semester. Our copies of MathCad 15 ran out in the book store, so I just told them to get the latest and greatest. We ordered 100 licenses of the completely garbage Prime 2.0.I am sorry, but the fact that I can't use over a decade of prior work is a complete joke. I have many licenses of MathCad, but apparently not the right one to even convert my perfectly good files to the garbage Prime 2.0.I have tried to find someone to help me, but there is no useful help that I have found. Unless I get help today, I am going to have my bookstore return the 100 copies of this garbage program and never allow my students to use it in my classes.Seriously, you have taken THE best engineering calculation software and ruined it. S

A friendly hello in search of help,Moessner's theorem is well known to me from number theory. It is vividly described in https://en.wikipedia.org/wiki/Moessner%27s_theorem and https://thatsmaths.com/2017/09/14/moessners-magical-method/. I would now like to experiment numerically with this sentence for a change in "practice". Starting from the sequence of natural numbers 1, 2, 3 ... a subsequence is removed from it according to an essentially arbitrary rule (e.g. every third number, square numbers, prime numbers, ...). The sequence of partial sums is formed from the remainder. With the sequence of the partial sums, the procedure is repeated with the same selection rule until it logically breaks off. And that's my programming problem. In MC14 I can't get a handle on the selection, the sequence of partial sums and the repetition as an algorithm, it was always vector nonsense that I don't want to publish here.It would be helpful if I could get a program skeleton with hints using the exampl