Mathcad

Dear Expert Persons in PTC Mathcad Prime, I am sending this for lookin' for any helps form all of you. I am jut a beginner of Mathcad Prime. Anyway, I try it so many times but it came up like this error, eventually. Any clues of Mathcad operation please kindly show me in the the file below.   PS: This is just my practice following the torturing from the website.   I am here for hearing from all of you. Thank You. Best Regard.

Can't activate mathcad trial version with the sent licence.

Hello!Sorry for my englishI just found this "problem" I think that first "mas" was sorted by first column. But "Mathcad 14" doesn't think so... And we get "mas1"... But again "Mathcad" doesn't think that "mas1" is sorted... and so on...This little thing brought me a lot of problems...Can you tell me, is it error of "Mathcad 14"? Or it works as it should? And what should I do?..Thank!Sergey

Warsaw University of Technology

Ich brauche den Produktcode von Mathcad

I am using Mathcad Prime 6.0 6.0.0.0I'm trying to learn the capabilities of using the excel component with Mathcad. Is it possible to start with an excel component to obtain certain output variables, read that into Mathcad, and then return value(s) back into the same component in excel to continue some calculation process. i.e. Get "A" and "B" values from the excel component, manipulate the values of A & B to obtain values for a "C" variable. And then read/output the "C" value into the same excel component? Here are the errors that I faced when I try to create the loop functionality described above I get the "Variable undefined" for the "C" value I'm trying to send back to excel.

Since 3 days already I can't launch the 30 day trial version - it just returns the same fail message 'invalid host'.

Computer Failed to Start. Geek Squad got computer working again, but lost my copy of MathCad

Hello everyone.I have extensive tables with data with which I must do repetitive operations, I have managed to make the calculations automatically in mathcad and obtain a table with the results. What I can't do is sort the final table to sum one of the result columns.I attach the file in Mathcad Prime with the table of results that I obtained and with the ordered table that I need to obtain. I hope you can help me, in advance thank you very much for the help.

I am using Mathcad Prime 6.0 6.0.0.0I am trying to find the User Guide and API application examples for the SDK that is mentioned here: http://support.ptc.com/help/mathcad/en/index.html#page/PTC_Mathcad_Help%2Fabout_mathcad_and_automation_api.html%23 . Can you tell me where I might be able to find that?

Puzzle only to fun. Question graphs are made by using Mathcad programing. For exsample of Level 4.   For the exsample of Level 10. And this is the problem I find in WWW. Level 7.

Error “The remote server returned an unexpected response: (407) Proxy Authentication Required” while installing 30 days trial version Mathcad.     Causes: This error can be because of multiple reasons like - Internet connection, Security firewall or any other means that would block the connection or obstruct authentication. With the help of local IT administrator, user can turn off the security for the time being and try to connect again after reducing the security level   Resolution: Contact PTC Customer License Management and request for a new license file.  

Error: Mathcad Trial Edition Entitled for Installation Support "The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF".   Causes: Confirm if the installer is for trial version of Mathcad   Resolution: Clear the cookies and Browser caches and then click on the link provided below The link to download trial is here      

Error "Mathcad application has stopped working" when launching Mathcad Prime x64-Bit version on specific Windows x64-Bit machines   Causes Identified:   This issue is machine specific, where-in 64-bit Mathcad application is unable to run   Resolution: Uninstall Mathcad Prime x64-Bit version Install Mathcad Prime x32-Bit version - Launch Setup for Mathcad Prime Select Install or add new software and select Next Accept the license agreement and select Next Select the Customize tab on the Application selection page Select the Application Features tab. Under Platforms, select Windows x32 bit. Select Ok Now select Install to complete the installation of the product Select Finish to exit the setup    

Error : "There was no endpoint listening at https://apps.ptc.com/accountServices/ PtcAccountService that could accept the message. This is often caused by incorrect address or SOAP action" in Mathcad Prime    Resolution: Lower the security settings (Firewall, Antivirus) Contact PTC License Management team User can try to reset the password - Here 

Error "PTC Installation Assistant has stopped working" when running setup.exe for Mathcad Prime" (Applicable only for SUA Edition)  Cause: Microsoft for .Net Framework is missing or is not installed correctly Microsoft Visual C++ 2008 SP1 is not installed correctly Resolution:   Run PrimeWixinstaller_64bit.msi from the ptcsh0 folder of installer   Run the fix provided by Microsoft for .Net Framework 4.5.1 Try to uninstall and re-install Microsoft Visual C++ 2008 SP1 Redistributable Package: 32 bit 64 bit

Error message "Mathcad PDSi viewable support: Setup has detected that you already have a more functional product installed." is displayed during the installation of Mathcad     Cause: System has advance PDF reader already installed   Resolution: Mathcad PDSi viewable support is only required for integration of Mathcad with Windchill. Users can ignore this message and continue with installation as it has no impact on Mathcad functionality. Corrected in Mathcad Prime 6.0 (UI installation) If newer version of Adobe Product is installed, PDSi viewable installation will not be attempted    

Before we get started - To obtain license file for Mathcad 15, Mathcad Prime 1.0 to 6.0 requires Host ID (Physical Address) and Product Code. Mathcad single user and student licenses can be obtained by selecting url - https://support.ptc.com/support/mathcad_supportCenterOpt.htm   The procedure to get the license file is listed below:   Select Option #Single User, Student Edition or Upgrade from Mathcad Express and opt for #Next     2. Select #Licensing on page Single User, Student Edition or Mathcad Express and select #Next     3. If you have a product Code, select #Get License, else you opt for #Log a Case with PTC License Management       Select the Release of Mathcad for which you need license file from the drop down list #Select Product.  Now Select #Next   NOTE: Users who do not know there Mathcad product code can refer below steps on how to get the Product Code (consists of  22 alphanumeric charac

I am using Mathcad Prime 3.0 F000I have Matchad 15 vers 050 & Prime 3.0. with the pc HP 735 G6 with processor AMD.the excel have suddenn block.If i use pc with intel processor and same installation (w10 office 365, & Matchad) i don't have this blocks.I have tried office 365 32 & 64 bit but it have same problem

First of all I would like to wish you all a successful, prosperous but especially healthy 2021. I also would like to thank all power users on this forum for all their helpful advice given during the last year. I have a large file that contains two types of measurements. The difference between both measurements is the length of their header (10 rows versus 11 rows). I would like to define the index of the files containing 11 rows what would allow me to easily remove the ones I do not need. I am using MC15 but till now I was not able to achieve my goal. I am even not sure whether this is possible. If it is not possible are there other ways to achieve what I want? For illustration purposes I have added a small file that hopefully will clarify the matter. All input is highly appreciated!

Hi everyone, Taylor's serial development doesn't want to work. Attached is the error displayed. Thanks in advance for helping me solve this problem. Thank you.

Purchased new computer. Transferred software to new computer. Software will not open. Need help to open.

Hello, can anybody help me with plotting these values in Mathcad se picture.   

I've made a workbook in Prime 6.0.0.0 and used some collapsible areas.  I find my self with many blank pages that keep re-appearing if I delete them.  Does anyone know why and how to prevent this?

Hello everyone, In the attached worksheet, I would like to define the Shekel family of functions using Mathcad. I am stuck here. I can’t find the error, help me. I appreciate it if you share your idea and advice on this worksheet. All the best, CarlosRomero