Mathcad

Hi, I want to know howw can I define a probability distribution function to use it with monte carlo function.Thanks

Hello,I was working on Mathcad Prime 3.0 and I started using it only a week back. I tried to insert data in to the table from a text file as we do it in Mathcad and I didn't succeed, I tried several options available in Prime such as README, but I didn't really understood how to use it to get the data into table.As many of us know that in Mathcad we do it in a very simple manner by inserting a table and importing data into it, and if we un check the relative file path then the data can be stored in the template forever.I was struggling to do the same thing in Mathcad Prime 3.0. Can someone one help me in this regard.Thank you very much in Advance!Ashok.

I am using MC Prime 3.1 on 64bit Win7.I have a MC document with 1 collapsible region and a bunch of text blocks, text boxes and live equations.The document is 9 pages long, I am using template headers and footers, and there are some inserted page breaks lower in the document.I was entering some new content lower in the document and when I scrolled up to the earlier pages I found that a lot of the content had been messed up... Text blocks on top of each other, on top of text boxes and/or on top of equations.It was quite difficult to clean up.If someone can tell me if this is a known bug and if they can suggest a workaround to avoid this happening again, it would be appreciated.This is very frustrating when it happens.TIA,--Doug

Hi - I have a solution to my problem which is :However I want my answer in decimal form - I have tried highlighting the result and then Format, Result, Decimal but it didn't make any differenceAnybody got any suggestions please on this one ?thanks,

I know about 3d bar plot in mathcad.But, I want to how to plot in 2D bar plot,I also tried by using,format--> graph-->traceIf I do like this, In my mathcad window, I could not able to select the trace tab.Thanks.

Hi - I'm not sure if I am doing this correctly - my question I am working on is :So I know that x(t) = 1 when t=0, and V(t)=5 when t=0, so I use x(t)=1 on the 1st Equation and Solve for B so I get B=1-Athen I substitute 1-A for B in equation 2, set v(t) equal to 5 and t=0, Solve for A ......However I'm not getting the correct answers so don't know what I'm doing wrong - can anyone help me on this one please ?thank you

Hi there.I just noticed that when add 2 variables defined as length (mm), the resut increase the value of 0.00000000000006. Can someone help me figure out why?As you can see from the picture below, adding the unit after the addition removes the error. Result FormatFormat: GeneralNumber of decimal places: 17Show trailing zeroes: yesFormat units: yesSimplify units when possible: yes

Hi - I'm wondering if someone could help me please on the following couple of questions regarding finding values of angles.First one is 2sin^2(2x)+4sin(2x)=3.729, second one is cos(56-3x)=-0.783 (56 is in degrees)For both of these find all the values for x between 0 and 360 (deg)Thank you - I'm struggling with how far Mathcad can help me here in terms of re-arranging. It seems easy to type in the equations and click on x and then 'SOLVE' however I think I'm doing something wrong .....Would appreciate any helpthank you

I am trying to parameterize a simulation in which a heat source dissipates heat through a plate. The power level (for the solver), plate thickness and area (for the geometry), AND grid (discretization pre-solver) layer will vary. The latter may be the limiting factor. Does the MathCAD play well with SolidWorks analysis?

How do you break an expression, so that it will print on two, (or more), lines?

Hello, cimmunity,my problem with PTC MathCad 3.0 is illustrated in attached picture.While I get correct answer and units of k (permeability) in square meters, but I can't convert answer into Darsy (Darcy). Where can be problem and what is the solution? Thanks a lot.

Hi Folks,I just had a visit from a Senior Technical Evangelist (that's really his title) from Mathworks. He suggested that I try Mupad, a symbolic math program that sits on top of the Matlab Symbolics Toolbox. Has anyone else tried it?It's still a command line kind of interface, but friendlier than the '>>' familiar to Matlab users. I have used Matlab since the early 90s and mostly like it - very handy for big number crunching tasks.To run it, all I had to do was type in 'mupad' from the command line. I think it requires the Symbolics Toolbox, though.

Hi - I have this question to answer using Mathcad 15 and I'm brand new to using it and just can't get it to work - the question is :A mechanical control system has a transfer function given by G(w)=8/(6+6wj+(wj)squared)where w = the angular velocity, I have to find the modulus and argument of the transfer when w = 0.5I've tried using w:=0.5 and Given and Find but it just doesn't work - can anybody please give a step by step of how to do this please ?Thanks (in hope !)

Hello,I have 2 equations and I have to find the intercept. The equations are:y^2.5=1-x^1.5y=(Rs/Rt)*xIn this equation Rs and Rt are constants and we need the solutions that will make x and y to be in between 0 and 1.I have been trying but I get a warning message that I dont understand. Attach is a picture of what my code looks like. Any help will be appreciated.

Hi guys, I am finishing up a course focused on half Excel and half Mathcad, with a smaller focus on the programing part of mathcad. I am having a lot of difficulties creating certain programs. My professor is finishing up the course with a small assignment that i cant seem to figure out. I AM NOT trying to get someone to do my work for me, I'm just truly lost when it comes to programming. Anyway, I attached an image of the description of the program she wants. I am familiar with the Trapezoidal rule (from my other math classes), and can come up with a simple program for Trap rule, but not with input parameters being tabular data. I'm not sure if this is a really simple program and I'm just not seeing it, but any help would be awesome! thanks!

I am having the equation as like this,which I attached below.How to find cube roots for this type of equation.Please can anyone help me.Thank you.

Hi,This Maximum function has one of the constrain Axial=20021.kN and it works fineNow I am trying to achieve if the Axial is a range variable Let say -20021.kN, 20000.kN...0.KN and other constrains remains the same and to find the respective Maximum valuesI am wondering is it possible at all in MathCADJ.Randeep

All -- I am a very, very infrequent user of Prime -- I have stuck to MC 15 and, increasingly, MATLAB. However, I just needed to port an old sheet to Prime 3. After the conversion, I see several warnings (see below). How can I get rid of these things? Thanks!

I have a matrix with two columns. The first column is sorted and there are repeating elements in the first column with the corresponding elements in the second column.I want to keep the element from the first column that have lowest value in the second column, the rest should be deleted. So there should be no repeating elements in the firstcolumn and the element that is kept has lowest number in the second column.( compared to its repeated elements ).Anyone who has an alghoritm for that or ideas ?

Hi All,Could someone tell me if there's a spreadsheet available, or any solution with built in functions to perform a Nelder-Mead simplex optimization of multi-variable function?Thanks,Zsolt

In attachment can be found "Keyboard Shortcuts" PDF guide for Mathcad Prime 3.1 F000 release.

In attachment can be found "Installation Guide" PDF guide for Mathcad Prime 3.1 F000 release.

In attachment can be found "Migration Guide" PDF guide for Mathcad Prime 3.1 F000 release.

In attachment can be found "What's New PTC Mathcad Prime 3.1" PDF guide for Mathcad Prime 3.1 F000 release.