Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

hi,i have a problem with Creo View; sometimes whern opening an assembly trough Windchill the loading bar get stuck at 99% (more or less) and it never grows.Our version is old but it never shows before Creo View 3.1Windchill 10.2

Hello! My team is looking into the Sectioning tools of Creo Illustrate.  We are running Windows 11 mostly with Illustrate 11.1 While reading through the Documentation, we found this page To View the Section in 2D ViewIt refers to a "Show 2D View" button in the ribbon menu in the Sectioning tab, then the Setup group.  Looking at my Creo Illustrate, I see no such button there. I figured it may be hiding, so I went into the ribbon customization menu, and looked for "Show 2D View", as well as looking at everything tool in the Sectioning Category.  I couldn't find anything   Would someone be able to let me know how me and my team can access the Show 2D View feature for sectioning in Creo Illustrate?  I'm probably missing something. Thanks! 

Hello,I want to remove hidden lines in my half section (circled red in attached picture) but still have hidden lines activated in the remaning part of the view (circled blue in attached picture) - how can I make this happen? I'm currently on Creo 11Thankful for all the help I can get./ Andreas

Hello, I would like to create a custom legend that uses the values ​​of an attribute from the EPMdoc, except that I would like to limit the number of decimal places displayed or remove the zeros.see image in attachments 0.940000 should display as 0.940.600000 should display as 0.60.900000 should display as 0.9 Is there an argument that allows us to master this?regards,Arnaud 

Hello all,I wanted to ask how you handle additional 2D symbols such as arrows, annotations and other image additions. I am thinking about creating a whole range of helpful 2D symbols. For example, all kinds of arrows and also a bin. I find that helpful sometimes. Of course, such things can be done later with another tool during further image processing, but we would like to do the complete image creation in CI if possible. My questions:1. how do you deal with this issue?2. is it possible to rotate inserted 2D symbols? This would be very helpful for arrows.3. is it possible to change the order of the inserted 2D symbols. The last 2D symbols inserted overlap the previous ones, and sometimes rearranging them would be helpful. Thanks and best regardsRamon  

In Creo Schematics 11.0, when placing a Block shape on a block diagram sheet first, run a report, select place artifact, and then place the Wiring shape on a wiring diagram sheet, the software does this properly.   When you have a wiring shape placed first, and then place the block shape next, the software does not show the block shape of that artifact. Only the label is displayed, but the shape's outlines are not displayed. I can click and drag/select the artifact and the properties can be seen in the parameter panel. I have tried updating all sheets, restarting the program, but still does not display. No Error is displayed.Not sure if this has anything to do with it but when I look at J1(NO GOOD) and J2(GOOD) in the model explorer, J1 does not have the 2 block ports (for this shape the ports are named BLOCK and MATE) but J2 does.  

Hi All, We are looking at a possible new opportunity for PTC engagement in CATERPILLAR Solar business. We would like to connect with the PTC team to understand the following: Creo and Windchill IntegrationElectrical Schematic and P&ID linkagePanel Wiring Automation We request if we could connect with the PTC team to discuss these topics. Eagerly awaiting the community's response. Thank you. Regards,Akhil ChallaSimulation Senior Associate EngineerCATERPILLAR

Hi Everyone, I am new to Creo View and trying to achieve the same in Creo View 10. Does anyone have a documentation link to do the same job viz, embed a Creo View control object to Any office Application? I do see that we have adapters/ Creo View toolkit for Office. But I am not sure where o start. Any links that can point me in the right direction would be helpful.   Reference topic: https://community.ptc.com/t5/Addtl-Creo-Products-View-Sketch/Using-Creo-View-models-in-PowerPoint/m-p/450791#M469    Thanks RM  

I am using Creo Schematics Release 11.0 and Datecode11.0.0.0Check connections tool reports missing connection on one of my blocks. The fiber appears to be attached, but when trying to reattach, the line jumps to the bottom left corner of the screen and reports error Internal Error 002. The only work around I have found is completely deleting the fiber, and rerunning it, but this does not necessarily fix the missing connection error.Check database reports no errors.Here are the errors that I faced>>>> error <<<<Internal Error (002) occurred. Use the Check Database tool and contact technical support for assistance.

Hi All, My team is newly adopting Creo Illustrate.  I have ~5 years of experience with it myself. The issue we are running into relates to the newer feature of setting a Font for callouts and such.   The font in our company has in its branding is Roboto Condensed.  We have downloaded this font from Googlehttps://fonts.google.com/specimen/Roboto+Condensed Within the Windows Control Panel, we made sure to only install Roboto Condensed Regular 400.  We noticed if you have multiple versions of a font, it is challenging to tell Creo Illustrate which one to use.  We ensured it was the TTF version of the font.Within the Admin Tool, we set the font to Roboto Condensed.Inside Creo Illustrate, we built up callouts on our models.  The font displayed correctly, as Roboto Condensed Regular.  Now we have our issue.  When I "Save Figure As" as an SVG (with the following settings) -The SVG comes out as Arial Unicode MSI do see that

Hi Im having an issue and creo won't open my file, can anyone show me how to recover this please. Using Creo schematics 4.0   

In a Creo Illustrate Figure, is it possible to have a section view only displayed in the inset? I do not want the section view on the main parent model in the figure view, only the section view.

Is there a way to show offset lines in exploded views in Creo View 5.1?  The Exploded view seems to publish fine, but the offset lines do not show up even when all construction geometry features are checked in the config settings (see below).

How do I get combined state view states tabs to appear in the main display of Creo View if it is possible. I have Creo Parametric 11 and Creo View 10.1. 

JT structures with *.stpx-files as root-product cannot be openend in CreoView MCAD (new file type necessary as we regularly receive these data by OEM)

Hello everyone,Unfortunately I have lost my settings. So far I have been able to restore more or less all of them.What is still missing is the antialiasing when exporting 2D views with 300dpi and *.bmp.I have now spent 3 hours looking for the right setting....without success.Then I saw that there are also ‘Settings’ under ‘Publish’.Here I edited the entry ‘Creo 2D’ under ‘Publish/’2D images’ and set “Antialiasing” --> “High”. Unfortunately, this does not work.Questions:- How do I set antialiasing when exporting 2D illustrations?- Why are there separate settings ‘Options’ and ‘Publish/Settings’?- Why is the needed setting not under ‘Options/Global’, but only under ‘Options/Illustration’?- And why in God's name does a trained engineer have to spend 3 hours searching for the right setting? Best regardsRamon(Siemens-Energy)

At present a customers uses IsoDraw CADProcess for creating cgm files with hotspots. Customers would like to switch from IsoDraw to Creo Illustrate, but hotspotting functionality is missing in Creo Illustrate.   Thank you and best regards, Jozef.

So yeah , I was told that there wasn't a way to have Creo Illustrate deal with part change rolls of like XYZ-001 tolled to XYZ-002 without having to remarkup the whole dang file again.   Or deal with multiple versions of said file that were 95 percent the same with various small options that changed it.   Well figured it out.  

We have these models that we're viewing in Creo View that has thousands of objects in them.  Some of the objects in model have an associated wtpart but the source model file we have doesn't automatically link the model parts because we're not using Creo as our model.  Anyway, we can manually type in the wtpart number as a custom parameter in the source model and we can see it in Creo View. The question is, "Can Creo View automatically make a hyperlink to the wtpart if it recognizes that parameter as a wtpart number?"   The vision is that the user would click on the object in the model, then its parameters would come up, one of which being the wtpart number, and then the user would click the hyperlink and get to the wtpart page in Windchill.      Thanks       

Creo illustrate used as stand alone envirnomentIllustration  are created for PWI in Process plan.facing Two issues:Callout of illustration (PVZ files)  which are created in creo illustrate 9.2 are disappearing from pvz files when opened in illustrate 11.1.Unable to create custom callout in illustrate ill.1 Any suggestion on this.Regrards,Nishanth B E

Hi there,when I want to install flexnetadmin 11.17.1.0, a msgerror file is created in the folder with all files (see attachement). There are many messages there, all of them have the heading "Message DB wasn't loaded.".In addition, the status remains permanently at "Being started...". ... but nothing happens.Can someone help me? What is the reason for this? I need access to Creo Illustrate.  Best regards Jonas 

Is there any way to have a cursor select setting that only selects top level components in the structure in Creo View MCAD (aside from the top level assembly)? Any type of solution to this will do. (Creo View MCAD version 11 being used).

Hi @lhoogeveen , With reference to this topic  By the way how did you had this VB added into Creo view?

I am using Creo Schematics Release 8.0 and Datecode8.0.0.0 how to add splices for more than 3 wires in Creo schematics.

I know this is a future question but perhaps a PTC PLM can chime in. I see that Cadence released version 24.1 last year. I was curious if Creo View Adapters 12 will support this version. The 11.1 version only supports up to 23.1.