Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

For large assemblies, the frames of the inserts are not displayed reliably.You can see this behavior clearly in the attached picture.Both anchor points were placed at the same height.If you scale the display, both frames are visible or only the right or only the left one.Is there a workaround so that the frames are displayed reliably?

Hello all, Is there a function that can be used to align the guide lines of callouts horizontally or vertically? In the attached image, I have only aligned the lines by hand. Unfortunately, this takes longer and is very imprecise.  

Hello everyone,Is it possible to add multiple arrows to a text note in Creo Illustrate? Matteo.

Hi, Is it a "feature", a bug or there's a recipe setting that I don't know of which makes inset explode lines completely different to their "normal" page view when exported?Sorry about the colour choice but it's noticeable anyway. In the page view all lines look the same (like the ones on the left in the picture). But when exported the inset lines get much thinner and densely packed.  Cheers,Tom 

Hello community, I have a problem with the 2D symbols. Why do the 2D symbols on a predefined 3D page change their size when I zoom the model? This should not happen because the size of a symbol usually refers to the page size and not to the model size. I currently have the problem that I would like to show a floor. Since there are no auxiliary tools (?!), I have created the floor as a 2D symbol. Unfortunately, it is not possible for me to create a uniform representation of the floor because the size of the 2D floor keeps changing depending on the model zoom or the side zoom (where the model is also zoomed). This also applies to all other 2D symbols. Is this possibly due to the fact that the dpi for a 3D page cannot be preset, but is only selected when the image is exported? Does anyone have any idea how I could create a floor differently? I also have the problem that the inserted floor symbol creates a border. Why is that? To the attached picture

So i marked up a bunch of brackets in creoview.  I discovered a few brackets floating in space as I forgot to bring in its supporting structure I also created groups for all my markups.  I can't save the file with 2 files.  I try to merge them and I lose all my notes and groups Why can't you just load as many PVZ's together and Save it as one file and keep all my markups and groups.  I tried turning the groups into a shared type and was like oh cool it brought all my groups to my new PVZ... Oooh but they are all blank and didn't bring over the parts inside them... Well that was worthless.  I shouldn't have to start from scratch to bring in a missing part.  Even if it can't merge them.... It should be like Oooh I can remember where that second PVZ file loads from and say would you like to load secondary PVZ's from selected location and if not found let you browse or skip.      

We have an additional request to display version information(Revision) of the drawing on the Creo View application Can someone please help me in getting the solutioning part? Thanks

Greetings, I am interested in trying to utilize more of the functionality of Schematics rather than just creating wire diagrams.Ultimately I'd love to be able to create a BID, and then create a CID (using the info on the BID), then create a WID. Does anyone actively do this?Would you be willing to share your process? Thank you.

Can I easily switch between the Lite and the Full versions? The end users want to be able to use both for a while

Hi all,I am trying to make a new symbol. I would like for this symbol to just be a note with pop up boxes for the information needed. A pop up box like this: Is there anyway to get this into a symbol note? I don't want it to be a parameter. Just simply a box to type in what is needed. Thank you

Hello,I need help to resolve the Error while using Creo View over the iPad as below.We are using Apple iPad 9.7 with 128GB storage and 2GB RAM.iOS 14.6, iPad (6th Generation), Model MR7J2HN/Ahttps://www.gsmarena.com/apple_ipad_9_7_(2018)-9142.php"Creo View Mobile" is loaded as shown below.https://apps.apple.com/us/app/creo-view-mobile/id560549930?platform=ipadCreo View Error;creoview://?wcparams=eyJhdHRyaWJ1dGVzljp7InVybGJhc2UiOiJodHRwczovL3V0a2Fyc2guYmx1ZXN0YXJpbmRpYS5jb20vV2luZGNoaWxsliwiYnJvd3Nlcil6lilsInNIc3Npb25pZCI6IIIXLTNLeVUOXZNISTNIT2NRVE5JeDZib205by5oaTVtliwidXNlcmlkijoiUGluYWtpRyJ9LCJpZCI6ImN2In0= Please guide and suggest to resolve this.Thank you.

Hello all,In general, the question I have is whether I prefer to work with isolated Creo-Illustrate files for large projects, or preferably just one, where I combine everything together. The problem is, of course, that Creo-Illustrate files are getting bigger and bigger and thus harder to handle. My example:Let's say I create two separtate Ci files (Ci 1 and Ci 2) for two different pvz files (Assembly-1.pvz and Assembly-2.pvz).In each Ci I create for example three 3D figures (3D figure 1...3 and 3D figure 4....6).After some time I realize that it would make more sense to have only one Ci instead of two.So I copy for example the Ci 1 and name it Ci 1+2. Here are now already the 3D figures 1...3 included.Then I import the second pvz, i.e. Assembly-2.pvz. So far, so good. Here is my question:Is it now possible to copy (transfer) the 3D figures 4...6 from the Ci 2 to the new Ci 1+2?Or do I have to recreate the 3D figures 4...6 in the Ci 1+2?Attached is the schematic vie

How do you export multiple Creo Illustrate figures to a PDF?

For an animation, you can move the cursor to whatever time you want within the animation.For sequences you can only move forward and backward. Is there a way to get to a specific time within a sequence animation similar to an animation?

I would like to do two things with Java API.1.Can I automatically assign color to the wire (Fiber) using the property color?2. For unconnected pins, the Connection point is set to 0, but the term name is the part name that we have assigned in the CSV files. Can You say with Java API when connection point is set to 0 that it takes term name Empty?

I've downloaded Creo View Express 10 more than three times fromhttps://www.ptc.com/en/products/creo/creo-view/extension-express-downloadUnfortunately, the installation could never be started.I always get the message "This installation package could not be opened. Have the application manufacturer check whether this is a valid Windows Installer package."I use Windows 10 Professional

I am using Creo Illustrate 7.1. I have a callout for all the bolts in my figure but the callout is for the left hand side. I want to move the callout to one of the bolts on the right side. How do I move this callout so that it still highlights all the bolts related to the callout? 

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have converted the Creo Schematics Lite to Creo Schematics Full version.This works well until I want to link an old design to the catalog.By the way the items that are mentioned are not on the design.I worked in the past with the central Library and a Template.

Hello,am I the only one who gets grey borders every now and then when extracting 2D figures from Creo Illustrate to bitmap (300dpi)? Best regardsRamon 

Hello,  I'm new to Creo View eCAD, but after working with the PTC service team, we are able to open up .pcb files from Siemens Xpedition inside of Creo View eCAD. In demos of Creo View eCAD (which are over a decade old), this can be taken a step further and married to the mCAD model of that circuit card assembly.  How do we marry eCAD & mCAD files in Creo View so that we can view both as once, like the image below: 

I just upgraded to Creo Illustrate 10 and I'm having a hard time searching for parts. Anytime I try to do Ctrl + F to find a part nothing happens! I tried adding the Find Function to my quick access toolbar and its totally greyed out. Any ideas what I could do to fix it?

I have converted the Creo Schematics Lite to Creo Schematics Full version.This works well until I want to link an old design to the catalog.I get the following report and can't solve it. Who can help me solve this?By the way the items that are mentioned are not fysical on the design. I workes in the past with the central Library and a Template. 

Hello All.I recently started working on CreoView and after having moved from Solidworks, I am unable to use shortcuts for viewing objects quickly such as (ctrl+1,2,3...) for viewing the model in different orientations. Can  anyone please tell me how to use these shortcuts to improve the productivity

SO say I have a sensor in this NHA structure.When I open up the full top level assembly model of the entire car say it looks like this. 000-900-111 =Car full assembly      >  000-111-285= Engine compartment installation           >000-285-358= Engine assembly                >000-358-001 part 1                >000-358-002 part 2                >000-907-783 Sensor 1                >Ect.... When I go look at the part path idCreo view will take those long part number and convert them into a shortform part id path so 000-900-111 it might make an 8 and all the other parts also get an assignm

Hi, Most of our assemblies created in Creo contain background objects which do not participate in BOM. They just facilitate the layout, including skeleton objects. The problem is that all of those objects, which are not suppressed, are getting published by the WVS Worker and are available down the stream in Creo View and Creo Illustrate (however they're not present in MAPSB, PPB, visualization tabs). Is there a way to set the worker up in such a way that those viewables won't contain such geometry and structure? Or is there a different workflow that would let us get this outcome other than suppressing all of those objects in CAD? Kind regards,Tom