PTC Education

Hi everyone, Is it possible to have CREO simulate licenses for the student version? I want to do some fluid analysis of a cold plate, but my version says I need the correct license to do so.I am running Creo 9.0 Thanks 

creo does not allow me to change the quota value

I downloaded the zip file  for creo 8.0 and then extracted all the items from it into another folder. Then I tried to open the setupexe file but nothing happened. I also checked in the task manager and nothing would appear. I tried doing the same thing with version 9.0 and 10.0 but I got the same problem. How can I fix this? (Windows 11) 

My son is using the pupils version of creo (V7.0.8.0) and we are experiencing problems using the sketcher. I use creo professionally at work but haven't yet encountered this behaviour. Whithin a sketch we are unable to edit the dimensions. Double clicking will bring the dimension to editing mode but after a second or so the editing mode will end again automatically. If you are really quick you can enter a new dimension 🙂 but that is not really a workaround. Any ideas what could cause this behaviour?

I have been using Creo Academic versions since they were released. Before that ProEngineer since it replaced ProDesktop.Due to network restrictions at my academy all our CNC equipment has been moved to a 'stand alone' computer set up that has no internet connection.With ProEngineer a stand alone license file request could be generated and the software installed with an emailed node locked license file.This does not seem to be possible with Creo or at least I have not been able to find out how to carry out such an install.Does anyone know the method of installing Creo - in this case Creo 3 due to the age of the computer running the CNC set up - on a non internet connected stand alone computer?

I installed creo before and used it normally, but I accidentally deleted it today and downloaded it again and it turned out like this.Please help me and I have a urgent task！  

Hello, I am a student and after trying to open Creo 8, after several months of not using it, i got the notification  that my license expires in 0 days. The professor deleted the older license and all the files connected to Creo and tried to reinstall it. i used the Code BE800908EDSTUDENTEDK12 and got an Error without any further explanation. Here is the image to further illustrate the problem. Could you please help me, as I need Creo reinstalled immediately for the university. Than you in advance.

Hello everyone,I am having trouble installing Creo 8 on my Dell XPS 15, i already turned off al anti virus software but the setup file still wont open and run on my laptop.Any Solution ideas?Thank you in advance!

I'm a hungarian student and I study in Győr in Széchenyi István University. I am currently installing the PTC Creo 9.0 - Student Edition. I'm following the Quick installation guide.I am entering the simple licence code "BK900908EDSTUDENTEDUNI" as indicated and click "Install license". Now I am asked to enter my username and password. At this point the installation program always gives me the error "Authentification failed". The username and password are entered correctly! I tried to reset my password but it didn't worked. I had a license for creo 6.0, can be this the problem?

I tried to install creo 8.0 on my windows 11 laptop and after I had extracted all the files from the MED folder I opened the setup.exe file and I got an error notification. Then I tried to uninstall it and reinstall again and with newer versions as well but nothing worked

Well I have a problem Renewing My  student License.  I I tried to Renew my license But It didn't work out. Please help me Quickly... I'm already making some projects right now... I hope I can handle this problem asap. And I already changed my account password but, he says "I can't verify whether you are a customer." 

Dear experts,I would like to hear your opinion on the following strange issue I encountered:I am working with Creo 10.0 student edition, and it seems like after installation, two different versions (with exactly the same path to Program Files/Creo) exist. I.e., opening the desktop shortcut and opening the start menu shortcut open two seemingly different windows of Creo, that mainly differ in the look of the "Model" toolbar. Here are screenshots of the two "versions":   Not only the two "Model" toolbars are different, the "Copy geometry" button, that is part of the "get data" in both "versions" looks completely different in each "version":               I couldn't find any way to move from one "version" to the other from "File->Options->Customize", so my main question is:How can I switch between the different "versions"? (i.e., if I open one of them, but want to use the other "Model" toolbar,

Hello! I want to upgrade to Creo 10 and therefore uninstall Creo 9 properly, so that it doens't leave any traces. To achieve this, is it sufficient to uninstall via the Windows function or is there an "uninstall-file" (.exe) that I can run? If so, I can't seem to find it... Best regards! 

As per the original post.    Hi, I have same problem...I disabled randomization of WiFi MAC address but the problem is still there. What do you recommend to do please?Thank you

Hello,While saving the assembly I generally receive this error "Object has failed feature", which does not allow me to save the assembly unless I suppress the part. When I check in the part I see no error. What could be the main issue and how to resolve it?   

Hello, i have no idea how to run creo 10.0 on my macbook  using parallel.It would be great if someone could give me or lead me to steps on how to do this  Kind Regards 

I was wondering if there are any significant features of Creo that I won't be able to use with student version? I've used Creo at work as an intern for the last year, and am quite comfortable using it, but I'm now wanting to use it to work on my senior project for school at home. Just wondering if there would be any changes I need to make to my normal workflow.

attempt to install Creo 10 student addition that was sent via email link, after account log in and run the installation file it won't go past the Application Selection, asking to choose from the list below and there is nothing that is populated to choose from

Hi !I'm trying to connect and work with my school Windchill but I keep getting the following error.Is there a way to make it work ? The error says :The file ... has been created with a commercial version of Creo Parametric and is not compatible with your version of Creo Parametric Student Edition (for educational use only)

https://www.mediafire.com/file/x5s78y2pvnhy7hz/LiftingTable3STEP.zip/fileI'm trying to open these files, but they wont open.  

Does PTC offer a Plastic Part Design Couse?Am aware of some of the tools available like Mold Flow, not sure of all of them. looking to establish a course list in house for upcoming designers and tools to be aware of. 

Hello,Customer filled in for Creo Trial.After one week they didnt recieved download link. BR

Want to learn more about IoT? Take a look at our new IoT MOOC!Discover the fundamentals of IoT development with ThingWorx for free! Learn how to model, connect, analyse and build Internet of Things applications using ThingWorx, an industry-class platform used by developers across the globe.This course is for all learners so don’t worry if you are not a coder! You will learn to identify IoT use cases and capabilities, how to model data originating from connected devices and much more!Find the new Fundamentals of IoT Development with ThingWorx MOOC here: https://www.udemy.com/thingworx-fundamentals/

RESPECTED SIR, I am the user of student version of CREO 10.00. I installed the software the error is occurs that software not detecting some technical data. There is attachment. Please solve this problem as early as possible. But when I installed student version CREO 9.00 that time this problem had not occured. In same laptop I had installed it. So please as early as possible please solve this problem. OR give another solution.  

Good afternoon, I have a customer that is using PTC Implementer on IBM I and we have a recurring issue after each DR Test.The DR is based on storage replication in another Data Center and when we switch there is always a license issue for the new hardware. The workaround applied is using the RESET command and that adds it. Unfortunately, i cannot find a manual on this application and I'm not familiar with it.Is there a way to avoid this issue? Does the application have something HA build-in? Any information is appreciated,Thank you!