PTC Education

How to connect and share content between two different Microsoft Hololens2 devices in vuforia studio.

Hello, everytime and every Computer in my university crashes, when i try to open the attached file. I saved the file shortly after no feedback was received by the program. Saving the file was possible but it also became very large in comparison to other creo files. Thanks in advance. HTWG Konstanz is the university @strobach It is a drw. file but i cannot upload it here??? I would like to send it a Supporter via Email. Best regards

Hallo,nach jedem Neustart meines PCs, erhalte ich einen Fehlercode beim öffnen von Creo Parametric 7. Nachdem ich die Lizensierung erneut durchgeführt habe, funktioniert das Programm (bis zum nächsten Neustart). Ich verwende die Studenten Lizenz meine Universität. Leider habe ich keinen Kontakt für Creo Parametric Support gefunden.Vielen Dank für Ihre HilfeAlexander Schork   Hi,   After every restart of my PC, I get an error code when opening Creo Parametric 7. After I do the licensing again, the program works (until the next reboot). I use the student license of my university. Sorry, I couldn't find a contact for Creo Parametric Support.Thank you for your helpAlexander Schork   Translated by Iuliana Lazar with Google Translate on 03. nov. 2022

I installed the creo version 8.0.4.0 and in node license generation i put this product code but it says invalid file format. Please tell me the product code for creo version 8.0.4.0

I have issues with the download and have tried numerous times to reach out to a support tech, Different departments have suggested emailing Student@ptc.com and when doing so i am sent an automated reply that the email is not monitored and then sent to the site where you have to literally start a forum discussion? 0/10 on customer support.

Hi,When trying to use the Quick Tables menu in the Table ribbon of a Creo drawing, the following message is posted. "...created with a commerical version of Creo Parametric and is not compatible with the version of Creo Parametric you are running." It appears all of the table files are not compatible with the Student version of Creo Parametric?

I installed creo parametric, but when I attempt to open the program I receive an error message, "License request failed for feature." How is this resolved?

HI We have found that we can not run Creo 8 parametric anymore unless we run it with admin rights or if we unblock command prompt neither of which are an option within a school environment. The application just doesn't load after clicking the shortcut/icon.  Has anyone else had this issue and found a resolution. Thanks

Information regarding the system:Macbook air M1 running windows 11 in parallels.Creo 8 education license The problem:Creo does not open, after installation. It just does not do anything and also does not pop up in the Task Manager. Whilst installing the installation manager complained, that he could not install Visual c++ redistributables. I finished the installation never the less, because under programs, in the system preferences, all the redistributables for visual c++ are listed.I tried all the other helping tips and tricks that helped others with similar problems. Does anyone have an idea, what the problem could be?

Does anyone know how we get the license for Creo 9.0 as a FTC team?

How do I get a CREO license for my FTC team?

Hello, I believe this is a basic question but unfortunately, I didn't succeed to do it. kindly see the steps I did might this will be easy to see where is my issue.(view in My Videos) basically i just want to changed the property value inside my industrial connection (thing) using any type of buttons. Regards,

hi I am trying the reinstall creo as I have had to put a new os (same as old windows 10) and as I put my key in it says error it is on the student version

Hi,after I installed Creo 8 and startet it I got the message, that the Creo System Monitor, Exit Logger and Creo Embedded Browser. I already tried to repair it with the PTC Creo Platform Services as it says in this article (https://www.ptc.com/en/support/article/CS331638) but the error still occured.What else can I do?

hi I am trying the reinstall creo as I have had to put a new os (same as old windows 10) and as I put my key in it says error it is on the student version thanks

Hello, when I run Creo 7.0.8 , I get the error 06x06000012. What have I do to fix it?

I was trying to install Creo Parametric Toolkitt following Getting Started Guide, but I get stucked. When I reach step 2.8( Running the Makefile Project), I can´t proceed to the next steps. I built make_install and modified protk_install_example/make_install/creotk.dat, but I can´t use auxiliary applications at Creo Parametric. You could check the steps I followed (until 3), and how is Auxiliary Applications locked.       

Au lancement du logiciel j'ai l'erreur 0x06000012.   When launching the software I have the error 0x06000012.   Translated by Iuliana Lazar with Google Translate on 24 oct.2022.

i am unable to install the creo software. i have the product key from students offer but after entering the product key it shows error. this makes the software unusable when i need it plz resolve this asap

I have been trying to get Creo 7.0.8.0 education edition to install and function on my laptop. I previously had Creo 4.0 installed and it worked fine. I uninstalled 4.0 and then went through the creo 7 download guide. When I install creo it works perfectly fine for about 16-24 hours, then I get the error shown below. To fix this I have been able to reconfigure the existing software using the setup from the initial download. This allows me to use creo for another couple hours until it crashes again. I have tried uninstalling and reinstalling multiple times, using different license codes, and it still does not work. Any help is appreciated. Attached is the license file that was generated. 

I had bought a license in August, I still can't get it activated. Now I'm trying again after giving up.

Hi, i have got a problem with my license renewal . Im still a student but today my license ends and creo cant verify me (photo).  

Hi,I've been going through the MPMLink PTC enterprise university and when it comes to built-in exercises they're supposed to be done on a dedicated - generic Windchill login credentials. (I guess I'm not allowed to share them here?)However when I try to use them either on live corporate Windchill or QA test session they do not work. Is there something I'm missing, is there an extra installation option or some external server?  Long story short - How can I access the Windchill exercise account with training files on it so I can do the stuff shown on training videos on my own? Best regards EDIT:Nevermind...the next page after an exercise presentation is an interactive html page where you go through the sequence....The first exercise has none for some reason hence I got confused 😞

Hello, I can't start Creo, at startup a "script error" window pops up and also that it is necessary to register the "Quality Agent", then the program just closes. Help me please!!!   Google translate Translated by - Anurag Singh Date - 10/11/2022     Здравствуйте, у меня не получается запустить Creo, при запуске выскакивает окно "ошибка сценария" и также что необходимо зарегистрировать "Агент качества", затем просто программа закрывается. Помогите пожалуйста!!!

Test Sagar (Check community creation)