PTC Education

I am new to motion or mechanical constraints in creo. I have a sub assembly with 2 pins on the side of it, in the main assembly I need to constrain them to a slot so that I can show the motion in my main assembly. I am able to connect them each seperately but not together. How do I tie them together so they are both tied to the slot?This slot would look similar to a garge door track.  

I had to make a new account because I couldn't access my student one. When trying to reset my password, I don't get the reset password email, no matter how I try. I'm trying to update to Creo 8 Student Edition, but I need my student account for the proper licensing. Any help would be greatly appreciated.

Dear Sirs,I had a version of Creo 7 student version (finished on the 22nd January 2022). I read on the internet that this can be extended so I tried to renew license with the same username and password as I used to log on here , but it didn't work. Any thoughts on this on how to extend etc This would be appreciated.

Hello, I have installed PTC Education version 8.0.3.0. But can not use the program because I get the following error message. License request failed for featureRequesting CREOPMA_Student6 [...] license.dat: (-21) License file does not support this version.Run ptcstatus.bat for server status. I already have the version on the Surface (2nd device) and I can use it, but it does not work on the computer (with the license BE800908EDSTUDENTEDK12). I would be appreciate if you could help me. Many greetings Translated with DeepL by Emily on Apr. 25th, 2022 ----------------------------------------------------------------------------------- Subject: PTC Education 8.0.3.0 Lizenzproblem Hallo,ich habe PTC Education version 8.0.3.0 installiert. Aber kann das Programm nicht benutzen, da ich folgende Fehlermeldung erhalte.License request failed for featureRequesting CREOPMA_Student6 [...] license.dat: (-21) License file does not support this version.Run ptcstat

Creo Parametric student version is not available till now  

Good evening! i can't find creo 8.0 file.I am getting 404 error.I am looking forword for you to solve the problem.THANK YOU

Hello   I downloaded the 4 Gb zip "MED-100WIN-CD-430_6-0-2-0_Win64" and unzipped it. When I disable my anti-virus and try to open "setup.exe" as an administrator, nothing happens... I tried many times. My Computer OS is Windows 10 and I'm trying to install CREO 6.0 Can someone help me ?   Thank you in advance for your answer, Have a nice day !

Hi,I encountered a problem while trying to reinstall Creo Parametric 8 student edition. I installed it a couple of times but it kept crashing (I am from Slovenia so I installed it through Audax site - I think that they add some pre-made models of bolts..., and it kept giving me errors), so I decided to delete all files related to Creo thinking that it would solve the issue (I previously had Creo 6 and Creo 7 installed, so I thought that the old files were causing a problem). But in the process of deleting the files, I managed to also delete my licenses. And the next time that I tried to install the program and to activate the license I got the error saying "You have reached the maximum number of license requests available for your product type". So, is there any way to fix this? If so, I would be grateful for any help. Thank you in advance for answering.

I'm interesting in buying the Creo Student Edition Premium because it's suppose to include Creo Simulate and I want to perform non-linear (large deformation) static structural simulations.  However, it's unclear what Simulate capabilities are included.  Can anyone tell me this*?  According to the Creo Simulate brochure there are multiple Simulate offerings: 1) Creo Simulation Live, 2) Creo Ansys Simulation 3) Creo Simulation Extension and 4) Creo Advanced Simulation Extension. I guess what I'm asking is which of the 1-4 Simulate offerings above  are included (if any)  in the Student edition premium license. Thank you.  * Unfortunately, the link is broken that is supposed to give this premium edition capabilites (see link below, then click Key Features - Creo Simulate).  https://store.ptc.com/DRHM/store?Action=DisplayProductDetailsPage&SiteID=ptc&Locale=en_US&ThemeID=21925700&Env=BASE&productID=5357652600&cat

Hello, My student license has expired. I am still a student and I want to update my student license. Can anybody help me please?

I just borrowed student version of Creo Parametric 8.0.3.0 from my friend. It was working fine in his PC.I changed the MAC address to mine in the license file, but afterall that, on startup, it shows Error -8. After hunting through the files, I found that there is no FLEXnet files, mentioned everywhere in the troubleshooting documents. So, How do I install this separately and connect it with my Creo. As I really don't want to download Creo again, because of data limitations.

Hello people.I installed  Creo 6 Student Edition i september and everything worked perfect. Today I couldn't start the program  so I uninstalled everything, but is unable to install it again.Creo Direct, Layout, Parametrix and Simulate all get the "Pending Prerequisite" status. I've read some walkthroughs but havn't still gotten it to work. I have:Followed this guide : https://www.ptc.com/en/support/article/CS283411Deleted the %temp% folderDeleted the Program Files/PTCBut nothing works.   

The install had no issues, when I try to run it, I get the following error.and when I select Yes, then I get the next error see below and then Creo closes.How do I fix this? Do I need to delete everything and start over? 

for my class, we are going over live simulations but creo 8 is not a part of the education version at least not currently installed on my program

This keeps happening when I try putting in the license. (see picture) 

i dont know about this error. It showed every time i installed the creo in different versions, like 3.0, 4.0, 8.0. what should i do ?. i have attached the screenshot of that error. please do something good. 

As per this thread - same issue    Hello, same issue as everyone else !   

I am logging into https://enterprise.ptcu.combut I get the below error and also wants to Install Flash which was withdrawn in 2020An error has occurred.An unexpected error has occurred. Usually it is a temporary glitch and can be fixed by waiting a few seconds and trying the request again. We are sorry for the inconvenience. The error has been logged and our team is working to get it resolved as soon as possible. To continue please use any of the links found at the top of this page.Hence I cant download CreoI have tried Chrome and Edge and 2 different devivesthanksJon

while installing I am facing issue like license source not able to found.

HiI have registered for CREO 8.0 and was directed to download the Creo 8.0. For installation, a message flashed that in 1-2 days, I will get the product key for education version but I have not received the same.Kindly do the needfulRegParthiv Shahparthiv@karnavatiuniversity.edu.in+91 94265 25551

Hello,I have downloaded creo 8.0 student edition too many times because at first i had some issues with the licence in the installation and now i cannot install it anymorePlease help!!😫 Thank you very much

Hello,Im a student and I've been using Creo 7.0 for the past year. Now I updated to Creo 8.0 and tried to use the Creo 8.0 education license (BE800908EDSTUDENTEDK12).. However, every time i try to install it, i get a error message saying it is "not appropriate". Really hoping to find a solution fast, as I need it for a class. Thanks in advance! 

Good morning, I am a student and I have been working with creo 6 since two years, a month ago I downloaded the creo 8 version and I was able to work with it until yesterday, when an issue with the licence came up. I attempted many new installations disinstalling every other version but I think I now have reached the maximum number of licences for my account. Is there any way I can solve this problem?

How can I renew my student license? Every time I try it just says it's expired and throws an error. I am running Creo 7.0.2.0. I see several other people have this issue, but apparently no one has a solution.

HelloI'm a student and I was trying to install creo 8.0.3 version using the students installation guide. The license that was in the guide got rejected. I don't know what to do next. Could someone help me out?