PTC Education

I have tried installing the software but everytime it shows invalid or format during licensing 

Hi,I installed a Creo 7 with a student license on a laptop I use during the week.On the weekend I have access to a much better computer and whould like to run Creo on there.Can i turn off the license temporarily on my laptop and assign it for a few days to my Computer?Or how can this problem be solved? Thanks for helping

Whenever I start up Creo Parametric 7.0.2.0, the error pops up : 0x06000012. Something to do with it can't run the Quality Agent and asked me to contact Technical support, if the issue pursuits.I don't know how to fix the issue or what I did wrong during the installation.I'm a student and I've a license.Thank you in advance.Yours faithfullyVictor Brasfalean

I am unable to install creo. My school has macs and chromebooks. Is there an alternative option we can use?

I have placed the file on my C-drive as described in the e-mail. Afterwards I have carried out the licensing in the program. The program always confirms that it worked, but the Express version does not change to the normal version. Mfg David Leitner Translated with DeepLTranslate.com Translated by Corina Ionescu, Nov 9th 2021   Ich habe das File wie in der E-Mail beschrieben auf meinem C-Laufwerk hinterlegt. Anschließend habe ich die Lizensierung im Programm durchgefüht. Vom Programm wird mir immer bestätigt, dass es geklappt hat, jedoch ändert sich die Express Version nicht zur normalen Version.Mfg David Leitner

The trial version didn't come. Translated with DeepL Translate.com Translated by Corina Ionescu, Nov 8th, 2021   Не пришла пробная версия

Hi, I just installed the Creo 8.0 Premium Student Edition and when I click "Flow Analysis", it tells me that "The selected functionality requires CFD Analysis License". I was wondering how to fix this?

Hello community members,I had got an error while performing static simulation. Could you please help me from this problem Error stating " The design study terminated abnormally.The model is insufficiently constrained for the analysis.Please review the element connections, properties, andconstraints. If this is a modal analysis, then you maybe able to obtain a solution by requesting additionalmodes." i had attached image of it  waiting for your response Thanking......

Hello, I had created profiles using the Bosch Profiles in creo 7.0 and then i am simulating it in creo simulate 7.0 but i found some errors. could anyone please help me.

hi, How does one get the PTC MKS Toolkit and I mean a disc or download.Please no runarounds.

Benötige eine Academic-Lizenz für Creo 4.0   "Need an Academic license for Creo 4.0" Translated with Google Translate Translated by Iuliana Nuta 02.Nov.2021

I have recently installed Creo 6 student version on my Personal Laptop. I am unable to run Drilling and Milling feature due to License setup issue while using Manufacturing module. please help 

Installed the MathCAD prime today on my student account.Can't run the while loop.It says, this feature is premium, to use this upgrade!!!How can a trial license not show the trial of the programming language?Doens't make sense

Hi, I just installed the Creo 5.0 Premium Edition Standalone Educator edition of Creo in order to help mentor my FRC robotics team. I was excited to try out the new simulate capabilities. When I installed, I went into the "application feature" section of the installer, and saw that "Creo Flow Analysis" and "Creo Topology Optimization" were unchecked. I checked their boxes and continued installing.   Now, Creo simulate appears to work well, and topology optimization opens as well! Unfortunately, when I click "Flow Analysis", it tells me that "The selected functionality requires CFD Analysis License".   When I go to file->options->licensing, and click Refresh license list, I see an optional floating license called CFD_ADVANCED_PLUS_SET. If I select this floating module, it says that it's been activated, but still won't let me open flow analysis. It says:   Option CFD_BASIC not ordered, please contact your sales representative. Option CFD_ADVANCE not ordered, please c

When i using creo parametric 7.0After 10 to 15 minutes use and when using pallets command it will gives message"Fatal error encountered. A traceback has been written to C:\Users\Public\Documents\traceback.log. Please send it to Technical Support."

To install Creo Trial 8.0, please follow the below process -   Login to  PTC.COM using any of the web browser installed on the system (Google Chrome, Microsoft Edge, Mozilla Firefox)   Under #Try & Buy tab select  Free Trials     With a wide range of products available in PTC store to try; select Creo Parametric Free Trial     This will lead us to fill out the pre-form with basic details. Once the required information is filled then click on # Submit. This will enable to trigger an email with the link to download and install the Creo Parametric Trial version on the system.        Once the form is filled and successfully submitted, user will notice below message -     IMP* -  Pre- form lists Creo Trial System Requirements in addition to information related to Modules Included within Creo Trial.     1. Launching of Creo Parametric Trial a. Make sure to click the radio button and check

Ich installiere das PTC Academic Program Creo 7.0 und verwende das Installationshandbuch PTC Creo 7.0 für die Student Edition mit dem Lizenzeintrag.    Jedes Mal, wenn ich die Lizenz eingebe, kommt mein Benutzername und mein Passwort: Lizenz nicht erfolgreich    

Hello!I installed Creo 3.0. After opening Creo Parametric a web window appears that I can't close, as seen in the first attached image. Also, after creating a new part, the plans do not appear (image 2).What I supposed to do in this case?  Thank you ! 

na studia mi potrzeba 🙂   I need for college Translated with www.deepl.com Translated by Corina_Ionescu on Oct 21st 2021

I am attempting to download the program, but I have no email with the license access pack that will allow for me to run the program. Is there any way for me to access the license or be sent the license pack?

How to Model Almost Anything A product development resource for K-12   This curriculum is structured to provide as much exposure to industry best practices and to the variety of models and activities that occur in product development as is possible. There are 12 exercises and each exercise is typically organized with a hands-on activity to explain the concepts, then a practice model to enforce the learning of the concepts and then a final skills assessment activity that provides another model to demonstrate the acquired skills.   The download includes 12 sections and all the required CAD models.   Section 1:  Solid Modeling Section 2:  Model Structure Section 3:  Model Analysis Section 4:  Assembly Constraints Section 5: Assembling Systems Section 6: Assembling Mechanisms Section 7: Concept Development Section 8: Preliminary Design Section 9: Creating Parts & Assemblies Section 10: Math & Simulation Section 11: Virtual Laboratory Section 12:

I subscribed school academic program for CREO 8 and I installed it starting from MED-100WIN-CD-450_8-0-0-0_Win64, even if the PDF procedure associated refered to CREO 7. I used the licences reported in the PDF and from the installation process it appeared as Active.Anyway if I launch Creo 8, I receive The error  "(-21) License file does not support this version" and the application closes.I have checked on https://www.ptc.com/en/support/creo-admin-troubleshooter/error-code/error-21 how to solve the error but when I click on PTC License Management tools link I receive "Request Processing Failed" on the web.After the installation I received an email with a "sw_license_email_*******.dat" file. I tried to replace the original licence in C:\ProgramData\PTC\Licensing, but Creo doesn't recognize it as valid licence.What should I do?

I have downloaded Creo 7 from school PTC program and I unzipped "MED-100WIN-CD-450_8-0-0-0_Win64.zip" archive. Then, following "PTC Creo 7.0 - Schools Edition - Quick Installation Guide", I disabled antivirus and firewall. Then right click on setup.exe --> run as administrator.Nothing happens.Suggestions?

hello good evening my name is ali I have a problem with download creo 6  I couldn't open it the message said the creo agent didn't initialize correctly   thanks  

As per this thread - Same problem i5 4th generation  8gb ram  Windows 10pro 64 1tb hard disk  Intel, Amd Radeon graphics  👉Creo version is 7.0.2.0 Student version   After complete  installation  finish. When I click on creo parametric  nothing is happen! 😔  Please help me.  NOTE 👉When installation was  completed  creo  parametric shows 👉installed with warnings ⚠️