PTC Education

As I go through the installation steps beginning with the licensing after I enter my order number and then I am prompted to enter my login information, which I do, the installation process freezes for a minute then a red ERROR appears. Please Advise.

Hello everyone! I had following issue when trying to install the creo 7 application: The common files could not be installed because apparently the creo 7 Platform Services were not installed, althroug the were. The problem should be clear in the attached screenshot. Here it says the requirements for the common files which are creo 7 platform services are not met. Above it says the creo 7 platform services have been installed. I would like to restart the whole installation process because I had other issues before which I solved but may have caused this one. But I used a License Key from my school and do not know wheter I'll be able to use ist again. Thank you all in advance!

Hi, when I open Creo parametric the program exits this screen.  I have already tried to find a solution for th esame issue. thank you

I am unable to download the Mathcad software I purchased onto my windows 10 computer. It gives me an error saying it cannot run on my PC which has a 64 bit operating system.

Hello sir ,previously I have installed CREO 2.0 but it is uninstalled now I installed CREO  7.0.2.0 but CREO parametric showing "License request failed for feature ".  my license expired on 5th march 2020. what should I do ,please help me in this regard as soon as possible.

A student of mine had a license out of date error since he had taken an earlier course using CREO Parametric 6.0. He since tried to reinstall and ran in several issues. I worked with him to fully uninstall all PTC programs and delete all folders containing any license data (like ProgramData\PTC and any QualityAgent folders for PTC). We seem to run the install fine using BK600908EDSTUDENTEDUNI, but got Error! instead of Success! I ran into this before when a student tried to install too many times.Please let me know how I can assist this student. We are using CREO Parameric 6.0 since that is our school's on-campus license.

Hallo !habe die Installation schon mehrmals gemacht, rebootet und Dateien im Programmordner gelöscht - hat nicht geholfen.Alter PC, auf dem Creo2 funktioniert hat ist leider defekt.Neuer PC hat Win 10. Obwohl ich gesehen habe, dass Win 10 nicht in der kompatibility Liste von Creo 2..0 aufscheint, hab ich eine Installation gewagt. Beim Starten von Creo 2 Parametric kommt der Fehler: 0x06000003 (Qualityagent kann nicht gestartet werden).Also mit VMware eine virtuelle Maschine mit Win 7 Prof  aufgesetzt - aber gleiches Fehlerbild: 0x06000003 (Qualityagent kann nicht gestartet werden).Hat wer den Fehler 0x600003 auch schon erhalten - und wie beseitigt?Vielen Dank!

Hello!   I imported .dxf file into Creo. The program doesn't want to extrude it, at least not the part I want.   Here is the procedure to repeat my "error":1) Open Creo.2) New. 3) Uncheck "use default template -> Choose "solid_part_mmks_abs".4) In Creo, click "Sketch" and choose a plane.5) "File System" -> select .dxf file.6) Place file on the plane.7) Click "OK" (after some time many markings appear).😎 Around 100 times click "No" on these windows (and then I got file "Bookend.prt"): 9) Try to extrude the part between lines (I also need to extrude all stars, but this is a detail).   Step 9 is the one which I am unable to do. I can select the space between lines (see image below): and when I click here, then message "No geometry was created" appears in message log: What I tried to do is make a "negative" of this model, so I would substract this negative from a cylinder and then get the final relief I want. But I figured out it is also impossible to extrude the l

Can you please share Creo Trial Installer

I'm a student who is using PTC Creo 3.0 Student Edition, I have installed the software on my laptop since September of 2016, and it works great without no problem. But yesterday the software crashed and started works very slow, when I try to do a sketch or access the menus its works very slow. I think the problem is not in the computer's hardware, because the software works great until yesterday. I have others CAD and design programs on my computer and I've checked them, for make sure if I had a problem with the graphic card, and there isn't any problem with them. I have windows 10 and also all the drivers updates.I have checked the forum before and I saw a similar post about it, it mentions about modify the config.pro file, I followed all the steps and tried it, but the program still have the same problem.

Hello i am trying to install creo parametric 7.0 on my system.. so i try to download from my ptc academic account .. but when i go to download section.. it is showing error 'Access Denied"...   Please help me i am a student so how can i provide service provider details or company code?   hoping for a working solution .....    

Hello, when I enter the license code BK700908EDSTUDENTEDUNI as required by the installation guide of PTC CREO ACCADEMIC I get the "error" message.Wonder how I should proceed?Thank you

When I attempt to install Creo 7.0 using the Academic Installer, the Installation Assistant never moves past where the screenshot shows. What might be causing this?

Hello,   Installing the academic license has shown success. However, trying to run the software provides an error message as shown for a "License requested failed for feature. Invalid feature name: [FEATURE_NAME]"   Images attached. license failurelicenses used

Getting error agent does not initialize correctly

Tengo problema ya que no puedo descargar el creo por cambio de computadora y me dice que mi cuenta ya existe pero no la puedo volver a descargar ya que em pide un numero

Precision LMS courses should be in video format.

I could not able to download the creo 7.0. looking for someone to help me guide me through.

When I try to open PTC 4.0 (Student Edition), there's an error message:"Creo Parametrics Student Edition (for educational use only) va s'arrêter.Impossible d'enregistrer l'agent de qualité : accès utilisateur insuffisant." (it's in French)I don't know why there's this message... I can't use Creo PTC...

Hi,I have problem with my Student licence. I had mathcad prime 6.0.0.0 on my old computer. I wanted install this software on my new computer, but when I fill data on this link (https://www.mathcad.com/en/try-and-buy/mathcad-express-free-download) I don't get any answer on my mail.

I am new to Creo and have just purchased Creo university student edition and cannot install Creo view express. When downloading the program it gives me an error message and a hyperlink that does't lead anywhere. Some help would be much appreciated.I am also unsure if i've actually managed to download everything in the package, I am unsure if we get tutorials etc. Some description might be necessary.This probably sounds incredibly primitive but I really do need some help..

Hello, i hope you could help me, or give me some information about the licensing of creo 7.0 student edition. I got trough university a creo 5.0 student version, but this one does not include the generative design, it includes only a beta version for topology optimization.    So i downloaded the ptc student version of creo 7.0, does this version include the generative design feature?    I am writing my final exam for my master thesis about topology optimization and i wanted to use Creo for my simulations to optimize and redesign a 3 different parts to verify a new method for lightweigt constructions.  Could you please tell me if this is possible with the educational license, otherwise i have to use a CAD programm from an other company.   Best regards, Steffen

I recently passed the Assessment - ThingWorx Professional Curriculum for Architect at PTC Academy , but I'm not sure what is the difference about this and the one provided by PTC University ThingWorx Professional Certification (ptc.com).   I'm not sure if it's the same, can some one please advise

Hello, I was following the directions to download and use Creo 6.0 student version. I got to the point where the program asked to enter the product code BK600908EDSTUDENTEDUNI, but then it gave me an error. Is there something I can do to fix this.