PTC Education

i can't download creo 4.0 because the registration system keep rejecting my US phone number. Anyone ever had that problem before ?

I bought a license for this version of Creo 4.0 since my study program does not cover Creo.  I want to install the license file associated with this version NOT the free university version since I need simulator as well.  I tried contacting customer service and they were Zero help mostly due to the language barrier.  When I do a fresh installation, it does not find my order number or the product code I have.  Please help me find a PDF to install properly or solving my issue would be great!

I have the educational edition of Creo 4.0 and it keeps giving me an error when I try to use simulate. it keeps saying unable to get required Creo Simulate license  

We are just about to start a new CAD course and we have some new faster cpu/gpus which will enable working with more complicated models (We are teaching ~90/session so hardware costs have been an issue). As a first task I was hoping to give the students a bit of time to get used to the Creo system and in particular the oreintation and view commands.      We obviously have  some models that we could give them, but wondered if any of the nice models often wheeled out at PTC presentations/launches are available for use by students. e.g. the full sports car model.  Having a reasonably complicated model of a commercial system would hopefully engage the students more. We already have a model of a large engine and a animated engine we have developed for the course.     The hype of a nice model with the students ability for move/fly around it, section and generate orthographic and rendered views early in the corse would be probably enthuse them over the block

hi everyone, I'm trying to add family table in assembly. It's a series of cylinder-style assemblies. when I add TRANSLATION1_MAXIMUM_LIMIT:CONN_4 as new column, and input values with "Open in Excel", and save, the values are not showing under the TRANSLATION column i created. Instead it shows only *.  Even when i just modify family table other columns like COMMON NAME with "Open in Excel", without touching TRANSLATION column, the values under TRANSLATION column will disappear.   is there anyway to avoid this? I really don't want to retype hundreds of value again and again.....

Hello, I am looking for the solution to my problem: How can we use a single part in an assembly with various dimensions, I wanted this to change the length of the Bosch Aluminum Profiles without making different part file of variable length in an assembly model.   Regards Yash Yadav

Hello,   I am trying to open Creo Parametric 4.0 for students and even though I followed the directions in the PDF provided by PTC on how to install it, it does not work. I copy and pasted the correct license for students and it still gives me the same error message. Please help. Homework is due on Saturday and I can't do anything without it.   Error message attached below.  

The most recent version of PTC Creo is available for FIRST teams. You can download it from our FIRST resources website: https://www.ptc.com/en/academic-program/k-12-program/students/first/software PTC recommends any team still using Creo 3.0 upgrade for the 2018 season. The newer version works better with Windows 10 and is required in order to use the KOP and field models available on our resource page.   -Brian

Dear Support Team   My Creo Student Version shows during start up this message:   If I understand it right, my license is not valid any more? How can I fix this problem? Thank you for your help.   Best wishes   Benji  

IoT Product Pitch

404 - File or directory not found.The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.This shows up when I try clicking on the pdf file to download the Creo 3.0 student edition. Tried downloading the older versions and it still shows this. Any help would be appreciated. Thanks!

Moved for visibility.

I tried opening my creo 4.0 and this error message keeps popping up:   C:\ProgramData\PTC\Licensing\BK390206EDSTUDENTEDK12_license.dat:(-1)Cannot find license    I tried inporting the file through the PTC Installation Assistant but it is still giving me this eeror message   

I am a decent coder with backgrounds in electrical engineering and programming engineering although I am a chemical engineer withe a biology degree. I love computers. and I am good with them. I just need help getting the the data to and from from the Thingworx servers in an acceptable time.  I think this is possible and I am not as good of a coder as I think I am.  Please help me!.I have a state machine built that lets you choose what type of control that you want which can be the  steady state operating curve, Step, Frequency Response, Pi, & PID.i would assume that others are have this trouble or I am just missing something completely.Also, Let me know if you would be interested in seeing the code and I will send it to you.Thank you & I look forward to hearing from you.-Hunter Eberle

Hi, I have just been able to install Creo 4.0 (Student Version), thanks for the guidance.   I now have two questions:   (1)  The software (Creo 4.0) has various components, like Mathcad, GD&T, etc., how can I learn the full usage of the complete software, Creo 4.0? Do I have to buy separate textbooks to help me learn to use the software effectively, or the software developer, PTC itself provides training materials and resources for students, or I should rely on both textbooks and training materials? If I have to buy textbooks, what are the title of the best textbooks. If I have to get training material or links from the company, PTC, how do I get the links?   (2)  There are different separate software like Creo Direct, Creo Layout, Creo Simulate, PTC Mathcad, etc. When I check, it seems all these software are also contained or embedded in ‘Creo 4.0 software’. And when you have Creo 4.0, you do not need to install other separate software like Mathcad, Cr

Heyho PTC community,   I'm writing this post as a last resort as I'm heavily struggling with getting the student version of Creo installed. Whether it be 3.0 or 4.0, I'm always running into the same issue. I sadly am unable to give you exact error messages in English as my copy of Windows is locked to German, literal translations will have to suffice I suppose.   My issue: No matter what I try, upon entering the license key, the installer stalls for a good 20 seconds, gives me a green "Success!" message, lists the license entry in the field below with status "Invalid file or invalid format", the "Next>>" option stays greyed out. Things I tried to resolve the issue:   -Installers of Creo 3.0 and 4.0, 64-bit -Unzipped through Windows Explorer as well as 7-Zip -AV and Firewall entirely disabled at all times -Tried internet connections via both Wifi and Ethernet -Always ran .exe as administrator -Used license keys from the corresponding PTC documents&nbs

Hello, At first sorry for my bad english I'm french.   I work with Creo at school and I have a student's license given by my school to work at home. I installed Creo 4.0 on my computer but since some days it doesn't open without any error message. Is somebody have a solution I have a big work to give in 2 weeks and I really need help Thank you

I have verified and installed my license multiple times, and I keep getting this error. I have the license in my files, not sure what to do now. 

Hello,I've installed creo 3.0 using a student licence. When I start Creo, a warning message (screenshot attached below) prevents the progam from running. Licence does not support this version. Is there an older version available for student download?Thanks in advance.

I have a student who is adding decals to his part.  It's a simple square block with a chessboard image.   Everything works fine.  He saves the part.   Then when he opens the part again, the decal has disappeared.  He can then go to render it again,  but why is the decal not saving to the part? Btw, he is using the same network license server as others in the class.  They are not having this problem.Seems very strange.Thanks for any help.-Brett Penza,Holy Name Central Catholic High School.  

The rest of the programs work but Creo Parametric refused to work. It says "Liscence request failed for feature" and it would be really helpful if somone could provide a solution. I tried working with a support person but it didn't work so I thoguht somone may be able to provide a solution.

         Hi, I am trying to generate an output as a random number using Postman and I want to PUT this output value onto thing as a thing property value butAs in the official Mars Rover example used in the academic course, to change the 'WindSpeed' property using postman, the following syntax was used:{"WindSpeed" : "88"}But now I want to pass on the value of the "WindSpeed" in an automated manner (something like using the random value function) so that I don't have to manually change it every time,Unfortunately, I am not able to do so as I have trying ways available online including setting global variables etc. etc. but it is always giving an error of 'BAD STRING' or that the JSON content does not have 'ValidProperties' etc. I think that maybe my syntax is wrong. Could someone please guide me as to how we can generate random values in postman(syntax etc.) and PUT it onto the thing so that it updates itself. Thanks!

We are currently running the old version 2 of CREO Academic and just recently we are receiving the error, License request failed for feature   Could someone advise how we resolve the licensing request.

Salve, Quando vado a modificare le opzioni di sistema, come la directory di lavoro e il colore del sistema, le salvo ma ogni volta che riapro Creo le devo reimpostare, come si fa a far diventare il configpro che faccio io come quello predefinito?  

Do you enter competitions like Gravity Racing, Human Powered Vehicles or Greeenpower? PTC Creo Framework extension is perfect for modelling the chassis.Here is how it works.Create a skeleton part with datum points. lines and curves where you want tubing and datum planes for section orientation .Add the part to an assembly.In the assembly, use the Framework tab to select a material section and size.Use the Framework tools to add tubing along curves and lines and between datum points.  each pipe is added as a new part in the model tree.Use the Framework tools to specify joints between tubes.Create a drawing of the assembly and add a table for total length of each section used plus a table for the length of tubing for individual tubes.Open each part and use sheet metal tools to split and flatten the tube to print a paper template for cutting the joint profiles.A zip file is attached containing instructions and the files/Youtube link showing how to create a car chassis.Do you have a K