PTC Education

HiIn my Uni we use Creo 2.0 as the main CAD software and I have homework to do with it.I successfully installed the sw on my computer, however when when I tried to run it, I got the error message shown below.I also tried a couple times to run as administrator, install as administrator, dowload quality agent, etc, but not get any right results.When quality agent is not installed, it shows a different error message with a question if I want to register quality agent. Both Yes and No answer leads to the shutdowb of Creo.Could anybody please help me? Thank you! Error message:

HiI have recently started using Creo Parametric 2.0 as part of my University Coursework and I have a question about how I can install it on my personal computer to be able to work on my coursework at home. My current computer is a MacBook Pro and I am aware that Creo is not compatible with OS X so I have been investigating running windows via boot camp. My issue is that I am not sure whether Creo would run on Windows if I were to purchase it and install it. The only version of windows that Microsoft still sells is Windows 10 and from what I can see there is a bit of ambiguity as to whether Creo will run on it. Looking through the different PTC webpages, I have came across some pages that states that Creo is compatible with Windows 10, and others that say it isn't. This page lists Vista-Windows 8.1 as being compatible: PTC Creo College/University Download | PTCThis page lists Windows 7-Windows 8.1 as being compatible: http://www.ptc.com/~/media/Files/PDFs/CAD/ptc-creo-hardware-notes.ash

Pretty much this. I got a PDF with a license code, but it won't let me enter it. What do I do?

I downloaded student version Creo 3.0 but when I open it I get the error "License request failed for feature"  and below "Invalid feature name [FEATURE NAME]". Can someone help me with this?I loaded it on my wireless laptop. Running windows 8.1.Lori

I have installed Creo 3.0 edition and I need to add Pro-Mechanism application in the software. I don't see this option in the installer window.Please let me know how to do it.Thanks,-Mohit

Dear Mr. or Mrs, I´m a student of the Technical University of Ostrava and I´m working on my dissertation. I made a registration at PTC at 31st of january 2016 and after that I got a confirmation about registration. I downloaded your software Creo 2.0 but I still haven´t  received the licence from you. Could you help me with this problem, please?

I have recently installed creo 3.0 student version on my laptop. when i attempt to open any of the icons they open but remain on a black screen and the programs do not run. I don't receive any error codes. It's just unresponsive. Anyone have any ideas? I have redownloaded and repaired, but still nothing. thanks.

Hi!I have the student version of creo 3.0 at home and the academic version at my university. When i tried to transfer an assembly + the 5 parts in it to try at home it wouldn't open and just said, missing parts or that the file couldn't be retrieved. I did transfer all the files so i didn't forget any file. What can the problem be?Thanks in advance

I just installed the Academic package on windows 10 computers and the programs won't start up when I open them. The computer does not give me in error messages, they just will not start.

We've been using the Intelligent Fastener (mainly screws) for a while now and love it!  No more guessing where holes need to be drilled once we place parts in an assembly.  However, we've run into an issue with integrating this feature into Windchill and need some help.When you create a fastener, Creo appears to pull a part family our of its standard library set and this now appears in your workspace.  Not an issue at first as Creo and Windchill will happily import these parts into your model and store them in Windchill.However, we just created a new assembly (not using our existing robot), and when we tried to check it in, we could not.  All of the fasteners "already exist in Windchill" so we cannot upload them.  We tried updating the part with what's on Windchill using the workspace buttons, but to no avail.  Short of eliminating the fasteners or trying to replace them with the Windchill versions manually, is there a way to resolve this?  Can we mak

Good morning,I'm an student and i'm new with this environment, i wanna learn about Thingworx but i dont know what should i do to obtain an access or an instance to start, can someone help me please?thank you and have a good day,

Hello, PLEASE ME IMMEDIATELY I COULD NOT OPEN CREO SOFTWARE SHOWING QUALITY AGENT RUNNING ISSUE & ERROR 0x06000003.PLEASE SOLVE ME I HAVE INTERVIEW TOMMORROW?@@

I've installed, uninstalled, and reinstalled Creo 2.0 Student Edition a few times, and I still get an error saying that the program is shutting down because it could not run the Quality Agent, which is required, and that I should report error 0x06000003. How do I fix this problem or get around it???

Attention FTC and FRC teams. Have you made an awesome CAD design? Share it with the PTC FIRST Community!You don't have to give away your design secrets, but it would be great to see some images of what teams are building this year.

Is it trial version 2.0 works?

We juts got a new laptop and will be installing CREO M060 but held off due to the FRC robot build season. We'd like to know if we load m060 on the new laptop will we still be able to open all our CAD files in M010 Creo which is still on our other laptops ?

Hello, I stumbled upon the ThingWorx Converge Business Process Editor - in the Academic Program we do not have access to this or am I wrong?Would it be possible to gain access to the Business Process Editor?It would be interesting to evaluate this part of ThingWorx in my current research project. Thank you very much in advance,Markus

Hello,i instlled creo 3.0 student edition and when i made model i went to assembly to made animation and when i click on ,,Mechanism,, creo give me:Startup of application "MECHANISM" failed.I really dont know where is the problem,i reinstlled few times

I have downloaded and installed Creo 2.0 on my computer but I receive and error code 0x06000003.

When I try to download Creo 3.0 or even 2.0, some of the files download however most of them get stuck at 'Pending prerequisite' and don't download! Does anyone have a fix? I have tried running 'setup.exe' as administrator but nothing changes.

Is it possible to use Mathcad for fitting of the McGhee model on DNA melting in the presence of ligands to experimental data?Valerij Grinberg

I just started practicing on PTC paramtic and I have a MacBook Pro, and I need to install the student software version, any help would be much appreciated.

I am a university student and I downloaded the student version. Every time that I try to open the software, it closes due to insufficient user access. Please help.

Hey, I installed Creo 2.0 M200 today, but it won't work, because the Quality Agent is not installed. And also the file qualityagent_64.msi is not in the install/addon folder. Can somebody please upload this file, so I can install it?

I have downloaded and installed Creo 2.0 on my computer but i receive and error code 0x06000003. What should i do ?