Windchill

When the product and library are created, the default policy is applied.I would like to predefine the Dafault policy for the life cycle I define.What should I do? Help thank

In the case of the promotion process, it could be changed in preference management.Where can I change to reconfigure the processes associated with a change request?Do I have to manually modify the default change request process?Or can you specify other workflows like the promotion process?   Please help me. Thank you.

Creo 4 M030 and Windchill 11 M030 - All our 4k laptops and workstations with 4k monitors have severe graphics glitch's using Chrome as the embedded browser and the search window in the upper right does not show until we drop resolution way down.   So I switched back to IE and the glitches stop but the search window still does not appear until I drop resolution. which is not an acceptable solution.   Each have various Nvidia cards, all 1-3 years old, all behave the same. I tried the most recent drivers.   high_dpi_enabled is already defaulted to yes...so setting this does not change anything.   Zooming in and out (within the embedded browser) makes the search window flash and disappear.   Windows scaling has no effect.   Any other ideas?  

X-20 has a great new Workflow Process Administration Utility that simplifies the job of monitoring workflows in Windchill.In the past administrators were not able to easily find or fix workflows that had stalled or experienced a fault. In some cases it even required knowledge of queues to figure things out. In Release X-20 (Release 10.0) it's now possible for most business owners to find all the workflow process in their area and inspect their health in one simple step. There is no need to have special knowledge or visit each project in succession. And, for site and organization administrators there is a way to find all workflow processes across the entire Windchill System in a single step.I've attached a single screen shot from our demonstration server to show the health status of workflow processes. We intentionally created a number of workflows and messed-them up a bit to show how we can event diagnose warning and error conditions. The health status column shows which processes need

Hi,I'm trying to learn UI customization and trying to create a custom Action as well as a Wizard. I found a TPI 150612 which talks about creation of a New Tab, however it's not much of a use. Have any one tried that? Please share on how to do that.I'm presently working on Windchill 10 and have a basic understanding of JCA architecture and actions.xml, actionmodels.xml and RBInfo rendering.Please provide an example on how to add an action which subsequently triggers a wizard and how to create a custom wizard for an OOTB functionality.Windchill Customizer guide is not much of a help here.Thanks,Chris

Hello all,        I am beginner in Windchill, I want to know about Windchill Workflow? Why we use workflow? When we use that? Could anyone help me in this?    Thank You Sumit Patil  

Hello friends,   I am setting my Distribution as it is working fine for me currently with Windchill 11 but it is not sending inflammations of Alternate parts along with the main part to my PLM connector. While setting Distribution target information manually from 'Manage Distribution' from Site->Utilities, i am getting this error on clicking the 'Yes'.   Screen shot of an error has been attached with this discussion. Kindly help me to set up the parameters here so that i can work in it.   Regards, Sunil Chauhan

Hi every body, I am new to the PLM/ Windchill field and I am having a problem when I follow some of the courses. I want to generate occurrences without having to fill in the Reference Designator.  When I do that, my occurrences don't update. Is that normal? Regards,  

I would like to know how to expose a report so that users have the option of reloading (back to input screen). I would like the users to have the option that looks like this:  

I have a requirement to consume/Read/Retrieve the Engineering Images stored in the WindChill Data Store.I have some to do some basic CRUD operations through a Asp.net Core WebApi or MVC application.   Is there any API's for  for reading the engineering drawing images from the Windchill data store.   It would be great if I can get some samples in Asp.net MVC or Web-API for my requirement

All, Are you using this functionality in Windchill, if so what are your results?   Using “Open filtered CAD document structure in Creo View” shown in the image below for unpublished files, opens incorrect assembly structure. It tries to open the Creo Views files for the parts that it did publish and assembles them using the default coordinate system (or something like that) which is definitely not how they are assembled in Creo.   This create an incorrect viewable that people could accidently start using to create media, redlines, assembly instructions, etc.…… I am suggesting we investigate the how to turn off these links.   We are not using Positioning Assemblies yet.  

Hi, I am a beginner.   If there are objects checked out during the promotion process, the process will generate an error.So I want to add an expression that checks to see if the object that initiates the promotion process is checked out.Tell us which api, class i should use   Also, I would like to add code to be automatically revised when I make a change request.The element that will be automatically revised is the object associated with the change request.   I really need to your help.Help me please Thank you.   from ChaSeonHo

We are looking to implement automatic post publishing of additional files (PDF of a DRW and STP of the PRT) at release to a wtDocument (or a subtype).   Are anyone of you doing so and setting the state of the document automatically?  we have "unknown-source" set so that when a promotion request is approved, or a change notice is approved, or the CAII does a "Set State" that it kicks off republishing and then post-publishing.   The issue we are running into now is that if a regular user submits the promotion request, post publishing fails because it uses the submitter of the promotion request to authorize the post publishing.  Since regular users shouldn't have create, modify, modify content on released documents, that user doesn't have the permission.   Has anyone ran into this / got around it?

Hello Everyone,We have purchased a handful of the Altium Workgroup Managers.  We are currently running Windchill 10.2 M020 with latest CPS.  I have been unsuccessful at bringing anything from Altium into a workspace or connecting it to a new Ecad design.  PTC documentation is very poor if you ask me on how all this is suppose to work.  I assumed this WGM would function just like the AutoCAD or Solidworks WGM.  If anyone has any home made training material they would be willing to share so I can start to see how this thing works that would be great.  The version of Altium I am working with is 14 but I have been told version 16 works but is not officially supported. 

Hi Everyone,   Good Morning.   I know there is one utility which will help us to get all soft attributes attached with it for a given soft type.   Can you please help me in getting the URL for the same?   Thanks in advance.   Best Regards, John

Automatically revise (or allow with collection)published content documents when source CAD Document is revised

The 'importable' spreadsheet contains all attributes that have ever been assigned to the parts in the results list, regardless of whether the attribute is now active.  This can be confusing for users who like to utilize the importable spreadsheet functionality for data cleanup.  I would like to find a way to get a list of only the classification attributes currently assigned to the current node which is associated to the part(s) in question.   Has anyone found a way to accomplish this?    i.e. for part X, which is classified as Y, I want to see all values for attributes that are currently assigned to node Y and not see any values that may have previously been populated but are no longer a part of the attribute set for node Y.

Hello, does anybody know where to find information about type of events (like "WorkInProgressServiceEvent") and the related events (like "WorkInProgressServiceEvent/PRE_CHECKIN").   Is there a list of them or where can I found some information about it.   Regards Felix

Hi,I have installed Windchill PDM Link 11.0 F000. I want to update existing server installation (install Gateway for Cadence ADW) using PSI version 11.0. After choosing Update Existing Installation/Install Optional Components the "Standalone Product or Component" is grey. I cannot choose it. On the server I have stoppen everyting: tomcat, LDAP directory. Any ideas?Slavek

There is a loader utility to associate WTDocuments to WTParts in bulk.  In the same loader, we could associate one WTDocument to one WTPart, one WTDocument to multiple WTParts, multiple WTDocuments to one WTPart or multiple WTDocuments to multiple WTParts.   Likewise, is there a way to disassociate WTDocument(s) from WTPart(s) through bulk operation?

wt.maturity.PromotionNotice pn = (wt.maturity.PromotionNotice)primaryBusinessObject; wt.fc.QueryResult qr = wt.maturity.MaturityHelper.service.getBaselineItems(pn); while (qr.hasMoreElements()) { wt.vc.Versioned obj = (wt.vc.Versioned) qr.nextElement(); wt.vc.Versioned newObject = wt.vc.VersionControlHelper.service.newVersion(obj); wt.fc.PersistenceHelper.manager.store(newObject); } i use that code and start process with promotion object for test code   when execute expression, occur issue   Windchill PDMLink wt.util.WTException: (wt.vc.vcResource/60) wt.vc.VersionControlException:버전이 이미 존재합니다. 복사본을 작성할 수 없습니다: CAD 부품  - 0000000121.prt, B.1//wt.util.WTException: (wt.vc.vcResource / 60) wt.vc.VersionControlException:Version already exists. Can not make a copy: CAD parts - 0000000121.prt, B.1 중첩 예외: (wt.vc.vcResource/60) wt.vc.VersionControlException:버전이 이미 존재합니다. 복사본을 작성할 수 없습니다: CAD 부품  - 0000000121.prt, B.1//wt.util.WTException: (wt.vc.vcRe

Hello   The demo was in progress through World Car as follows.However, when visualization is done, the image is broken like the following picture. The version of Windchill is 10.2 M030 cps 25.The adapter and client are 3.0.WVS used Creo 3.0 M130.Walker's Recipe Editor is the default value. Worker is configured on a PC other than the Windchill Server PC.   Thank you.

So I have a bunch of assemblies with viewables created for them that are not showing the whole assembly.  We are using Positioning and Extended Positioning assemblies.  But I noticed that every one that isn't showing up is fixed in the CREO Assembly.  We are using Creo 3 m140 and Windchill 11 m030.  Below is a screenshot of what we are seeing.  Anyone with any ideas?  Other than the obvious which is to not fix items in an assembly.  

After I define a new workflow template, I need to use this workflow for a document. How can I do this? Should I again go to utilities/workflow template Administration/choose the workflow template/ Right Mouse button/Initate Workflow process/..."    Understand there is another alternate method:  Need to cusotmize jsp pages etc., to add the menu along with the list of change processes    Is there any other better method?   Thanks...  - Ravi

When you access a lifecycle template or workflow template in Windchill, the Java application launches.Each time a security warning is displayed, you have to click Run every time to run it. I would appreciate it if you let me know how to set it to run without the corresponding security warning.