Archive Read Only

Hallo zusammen,ich habe das Problem, dass wenn ich eine oder mehrere Arbeitsebenen mit 2D-Inhaltim "Bündel" mit abspeichern möchte, dies schon mal der Fall ist und ein andermal nichtgemacht wurde. Was natürlich dann sehr ärgerlich ist.Eine Systematik zum Arbeitsebenenspeichern habe ich nicht gefunden.Wie geht man gezielt und sicher vor?Mit GrußWerner

Create an option to Output all Operations CL dataI've created a poll for a product improvement.  I would like to see an output all operations tab in the Save a CL File button.  Quite a bit of my time is spent waiting for each output to complete just to start the next output.  If I could just pick output all operations, it would allow me to go on to other tasks while the CL data got computed.

Hi all,Is there a way to snap to 2 tables together. No some guys are doing it by eye and some are doing it with the use of coordinates.But is there a way to let them snap on each other

Are any of the members of this forum located in Australia? New Zealand?regardsAl.

Hi guys,I had an old project which is not opening with my current version of creo.Can someone convert the file in .pk2 for me please? The file is .pkgCan you give me your email so I can transfer you the file?Best

Someone mentioned that the Liveworx community did not have may people in it.  I figured this was a larger group. There is an interesting thread going on over there.  You might want to take a read.So what is your assessment of this year's Liveworx?

I just wanted to post a note to the group Model Based Enterprise (MBE), in case anyone in this group wasn't at LiveWorx or has just missed the notice that you can download a sneak peek (Beta) version of Creo 4.0 to try out the new features.There is a hidden group on this community site where we are posting information about the enhancements across Creo 4.0 and having some good discussions. If you want access to this group and would also like to download the Sneak Peek software and give it a try, just send an email to - and you'll be granted access.Once you're there, you'll want to look for some blog posts by me that will guide you to information about all the cool MBD enhancements.-Raphael

lors d'un analyse en mechanisme. le graphisue de l'evolution d'un angle est toujours d'un sel coté de l'axe des abcisses. Il y a t-il un Moyene d'avoir des angle et des graphique avec des angles allant de -10 deg à  60° avec ProWildfire 5.0

Hi, I am new to this website and  i am the beginner for this software. Could please help me out of this?

Etant daltonien , est il possible dans l'arbre du modèle de mettre les fonctions échouées en Bandeau fond rouge plutot que le texte en rouge ?Le texte en rouge demeure non visible pour moi.Didier

I am trying to create a button with drop down menu in quick access toolbar like a button whose name is open and in it's drop down menu option will be .prt, .asm, .drw.For example please see the attachment.

helloi have a problemi  want to constrain  two arcs tangent like photo but creo place with a offsetwere am  i wrong?

Hi,We have 4 Creo/Windchill users in China and they complain about the speed of working in Creo 3.0. We found out that the Creo Agent process is communicating intensive. This is also due to fact they have a limited bandwidth on their VPN line to Belgium. I read an article explaining that the Agent could be disabled but this is strongly discouraged. https://support.ptc.com/appserver/cs/view/solution.jsp?source=SPR Viewer&n=CS39740 Does anyone have experience with this and when disabling the Agent to what problems this can lead ?Bes regards,Bernard

Hallo zusammen,einem Element kann man über Teileeigenschaften - Material - Dichte Werte eingeben.Kann man dem Teil aber auch eine Textut (Multiplex, Sperrholz usw. mitgeben?Oder ist dies nur in der Vollversion möglich?GrußWerner

Deep thoughts for a Monday: Does anyone know if CAD functionality is "patentable"? In other words, why is it that every CAD software does not have similar processes for creating features since it's all found in calculus, physics, chemistry, Statics and Mechanics textbooks? I know that "code" is patentable and protected, but are individual features or methods of creating those features "proprietary"? Isn't and extrude and extrude in every software?  I have witnesses years of "showdowns" between CAD software "mine is better", no "mine is better" type stuff and I always wondered about this.

not able to give zero angle in sketcher to the line?

When dimensions are populated in a table file, I want them smallest to largest.  (Ex. 1.00 x 2.00 x 3.00)  I am unsure how to set up a relation to accomplish this.  I'm using Creo 3.0.  Thanks

Hi,I am new to the BMX module. Can any one suggest, the proper way of study for BMX modules.And please share the materials or sites to know about the BMX.Thanks in advance.uday

When did the PTC logo change? I must have been sleeping.

I am having trouble selecting surfaces,edges and sketches with ptc creo 2.0 m120 student edition.OS-windows 8.1.have to click multiple times for selection.

Hallo zusammen,ich werde schier wahnsinnig. Aus irgendeinem Grund schwebt meine Strukturliste jetzt frei auf der Konstruktionsfläche.Es will mir nicht gelingen diese wieder links fest am Rand anzubinden.Kann mir irgendwer helfen?Mit GrußWerner

So this started recently happening when I try to save a file:I am not able to choose the directory or folder I wish to save the file to. Can anyone tell me how to fix this? Thanks!

Hey,I have a Section with a line with starting point (0,0). Now I want to get world coordinates(in the Solid CS) for this line. It may be like (100, 140, 10)I read in the User Guide, that there is an option to transform coordinates using rotation matrix(and probably not only rotation but also shifting as long as Matrix is 4x4).Say I have an object of pfcTransform3D class, now I have to setMatrix and then I will be able to TransformPointThe question is: To setMatrix, I have to know coordinate system's base vectors (for xOy are (1, 0) and (0,1)) for both (target and source CS's). Where can I get these vectors for my Section and Solid (probably (1, 0, 0) and (0, 1, 0) and  (0, 0, 1) )  and Shifting vector?Thank you in advance,Artem

My options menu window appears to big and only shows either the top half which you are able to exit out of the window on, or the bottom half where you apply the changes you'd like to make. I can make the screen wider or thinner, but when I try to make it shorter by dragging the top of the window down it glitches and does not work. So none of the changes I make are ever applied.

I don't like myfilter, smart filter does what I want. How can I make it default to smart always, or get rid of myfilter?