Archive Read Only

What are you using for machinable plastic? I do a lot of drilling so the material can not melt during this process. I like to use polycarb but the money people are crying about cost?

Here's another one. I am slightly spastic, and rather twitchy, and very lazy, so I use a Microsoft Optical Trackball, which allows me to program one button to be exclusively 'double-click', then set the 'double-click speed' so fast I can't do it manually, and still have the normal three buttons (click, middle-, and right-click). Trouble is, ProE WF4.0 seems to be ignoring the signal from the one button that is 'double-click', probably because it isn't setup to recognize this particular driver. Can someone tell me how to fix this? I would really rather not have to go back to a standard mouse.jw

Hello I was wondering if anyone else has come across this issue recently withProE maintenance. I got a quote from M.R.C. Maintenance Reseller Corporation Authorized Reseller of PTC MaintenanceContracts for North America400 West Cummings Park Suite 4450 Woburn MA 01801Are all the maintained contracts going thru them? Or is it that factthat the $$ amount is so little(1 seat). Thanks

Does anyone have a 1/4-28 grease fitting? McMaster does not have one for downloading.

Hi, Raymond, Peter Question: Do you have the same issue like me? When I do NC Sequence for face down the work piece and I set the tool on entry to leading edge and on exit to center it does not work correctly the tool goes to the heel. Do you know why? Or it is an internal issue with the software? Version used WF_2.0, 3.0 Thanks, Mike

test

Is there any way to filter the layer tree so that only layers actually containing items will be displayed? We are using rule based layers and would like the layer tree to only display layers that have something on them. We don't want to hide the layers, just have them not shown in layer tree. There does not seem to be any filter for this built in. WF2 M260.Thanks,Mark Ganzer

Proe users, Sorry this isn't exactly proe related but I know I will get several repliesfrom this list. Can anyone suggest a resource in the Columbus Ohio area thatcan offer Mimics Materialize software services to model anatomy from CTscans? Thank you Ryan Crisp Mechanical Engineer 501 Morrison Rd. Columbus, OH 43230 P: (614)337-9979 F: (614)337-9499 - www.prioritydesigns.com

Hello All!I would like to add new materials to the default materials that come standard withPro/E Wildfire. I have searched for new materials libraries on the web, but no luck.Anyone know where I can download some new materials to expand my materials options?Thanks to all in advance!Regards,Neal Milligna

Is there a way to import layer trees? For example, I often times import cad models from vendors of various fittings, valves, etc. I spend too much time creating and naming layers to correspond with my companies standard layer naming convention for designed parts.

Anyone have a model of a single swivel round wheel caster, ~10" Dia. (I can scale).TIAWayneF

Ok, I have done some searching and see that most people don't like somethings about the new measurement tool in WF 3.0 In know that in WF 2.0you had the option to turn it off and use the old version. Can I dothat in WF 3.0? Turn off the new measurement tool and use the old oneinstead?WF 3.0 M120Thanks!

Does anyone have a 2" victaulic coupling they would share?

Does anyone have any VAR's in the Charlotte, NC area?Thanks.

All it takes is a quick search on a site like Snopes, as Brian did, toensure that this kind of e-mail isn't perpetually forwarded. Check first,then forward once you know it's true. Anthony TroupeSr. DesignerMGS Incorporated178 Muddy Creek Church Rd.Denver, PA 17517

I was wondering is it possible to use blueprints in Pro/Desktop? if it is can use tell me how to insert the blueprints please. I am wanting to create "renders" of a E30 M3 and need to use blueprints.

Hello all. I am looking for any photorender tutorials that may be out there. Also, what would be a good 3rdparty software for rendering in Pro/E? Thanks to all in advance!Best Regards,Neal Milligan

Has anyone come up with a good workaround to the limit that you can onlyrestructure one component at a time? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514-

I have been looking for the process on how to make a nut or screw but it's not that easy...can anybody please help me figure this out

When I attended the PTC Users Conference 2006 in Dallas, TX, I remember in one of the seminars the instructor covered a command called Fast Highlight. This command controls what happens to your model geometry when you drag your mouse across the screen. Has anyone else heard of this command in ProE/Wildfire 3.0 and how to turn it on or off? Thanks, Mike

Hi all,Just thought I'd pass this along.Sip _____

Is there a way to set the first column width in the model tree? All other widths are adjustable from the Model Tree Columns menu, and when I open a model the first column is only a few characters wide. Thanks, Phil

Here's the scenario. A person had Wildfire 2.0 but removed it to upgrade to 3.0. Can that person give their original working version of 2.0 to someone else to use??

per: <u>https://www.ptc.com/appserver/cs/view/solution.jsp?n=/117891.htm</u> i can't seem to get this to work properly. does the environment variable need to be a system variable? also, should the path be in quotes to accept the spaces? any help is appreciated.Ed LeeSr. Designer

Proe Users, Is there a web page or document that PTC lists the changes that occur frombuild to build? If so where do I get it? Thank you Ryan Crisp Mechanical Engineer 501 Morrison Rd. Columbus, OH 43230 P: (614)337-9979 F: (614)337-9499 - www.prioritydesigns.com