Archive Read Only

Has anyone come up with a good workaround to the limit that you can onlyrestructure one component at a time? -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514-

I have been looking for the process on how to make a nut or screw but it's not that easy...can anybody please help me figure this out

When I attended the PTC Users Conference 2006 in Dallas, TX, I remember in one of the seminars the instructor covered a command called Fast Highlight. This command controls what happens to your model geometry when you drag your mouse across the screen. Has anyone else heard of this command in ProE/Wildfire 3.0 and how to turn it on or off? Thanks, Mike

Hi all,Just thought I'd pass this along.Sip _____

Is there a way to set the first column width in the model tree? All other widths are adjustable from the Model Tree Columns menu, and when I open a model the first column is only a few characters wide. Thanks, Phil

Here's the scenario. A person had Wildfire 2.0 but removed it to upgrade to 3.0. Can that person give their original working version of 2.0 to someone else to use??

per: <u>https://www.ptc.com/appserver/cs/view/solution.jsp?n=/117891.htm</u> i can't seem to get this to work properly. does the environment variable need to be a system variable? also, should the path be in quotes to accept the spaces? any help is appreciated.Ed LeeSr. Designer

Proe Users, Is there a web page or document that PTC lists the changes that occur frombuild to build? If so where do I get it? Thank you Ryan Crisp Mechanical Engineer 501 Morrison Rd. Columbus, OH 43230 P: (614)337-9979 F: (614)337-9499 - www.prioritydesigns.com

per: https://www.ptc.com/appserver/cs/view/solution.jsp?n=/117891.htm i can't seem to get this to work properly. does the environment variable need to be a system variable? also, should the path be in quotes to accept the spaces? any help is appreciated.

How can i solve this?

Well I now have a very complete library of triangular symbols thanks to many who responded, very quickly I should add.I was probably mistaken that there was something similar to the formula for a square with text within. But if anymore info comes in, I'll let everyone know.Thanks for the help,Stefan

Hi all, My brother has completed diploma in automobile engineering and a course in CAD, ProE and looking for a job. What kind of opportunities available for diploma holders. Can anyone help me.

Does anyone know how to output 2D files in Wildfire 3.0 that can be read into FabriWin 7.11 software? Apparently standard dwg or dxf files created in WF cannot be read into FabriWin.

"C:\Program Files\proeWildfire 3.0\bin\ptcstatus -v.bat"

Anyone know if Pro-E Wildfire 2.0 can open Solidwork files? .SLDPRTDouglas Bowles/Sr. Mechanical Designer [DKBowles & Assoc. Inc.]

Thanks for all the help on this one.Excellent service, as usual...With luck, this may help some others, as well. I suspect I am not the onlyone wanting to know.Regards,John

I received many, many responses on this one.Unfortunately I had already tried most of them, since in most cases they would work.Here were the most repeated suggestions:>Have you tried using Edit> Value? >Select the symbol then do a right-click and select edit value>single select the whole note first, you should be able to double click the embedded symbol and edit it. >Just S-L-O-W down between the first and second clickHowever, I did find something that did work.If I edited the note and removed the braces {}, and the text style number

How do you go about adding your own sketches to the pallete? Thanks.

to whoever that can help me: hey i just bought the student edition: on sketch mode, when i try to select, the selection rectangle does not show up. Also noticed when i try to trim sections the trim line does not appear. Is that a glitch or there's a setting i dont know about? thanks

Hello all users,I need to make an egg in Wildfire. The only difference is that the egg shape would be somewhat of a sqaushed shape. Not perfectetly round. I have attached a jpeg that shows a side view and end view of what I am trying to produce. Any turorials or suggestions would be greatly appreciated. My client is waiting for me to finish. Thank you all in advance!Regards,N. Milligan

I know this is a long shot, but does anyone have any automobile models they can share? TIA,Paul DeLong

Hi guys, does anyone have a link for free 3D downloads for grease nipplesTIA .

I want to create an "extrusion". I am picking both sides. I want the thickness to be .156 inches. It tells me the I am out of range, that I need to be from .174 to 1000. What is the deal with this?

Hello all users,I need to make an egg in Wildfire. The only difference is that the egg shape would be somewhat of a sqaushed shape. Not perfectetly round. I have attached a jpeg that shows a side view and end view of what I am trying to produce. Any turorials or suggestions would be greatly appreciated. My client is waiting for me to finish. Thank you all in advance!Regards,N. Milligan

Folks,Can anyone point me to good service organizations that do 3D scanning of physical parts? I would prefer first hand recommendations from people who have used the services of particular companies and received good clean usable models at a reasonable price. Thanks up front for your help.Scott W. SchultzPrincipal Consultant3D Relief Inc. 3700 Willow Creek DriveSuite 200Raleigh, NC 27604(919)259-0610<u>-</u>