Archive Read Only

Is there a way to change the K factor system wide?I know that I can change it with edit definition on each bend, but I'd like to change it system wide.We work with metal steel plate, usually thicker than 15.7mm, and the designated K factor (0.318) is not correct, according to my supervisor. Please let me know and thank you!

Conflict.Hello, I would like to know how to disable the screen that appears in Creo 1.0, which was not created mass "conflicts" (mass properties are not calculated) next image in question has a solution or not.grateful. ........

Is anyone besides me getting annoyed at the spammy advertising messages that have come through the list frequently? I would think that we had some sort of policy for this, or am I mistaken?Kris M Rowlands

I need help offsetting or thickening this quilt. I have tried to do it several different ways. I usually get an error of some surfaces are self-intersecting. I need to offset the quilt by .015" in both directions for a total of .030".

don't know who I'm going to have to talk to get that fixed.                                                                                                                                                              &nb

Hi,I am wondering how you change the measurement units in creo parametric 1.0 e.g. mm, inches, etc.I have tried and tried but can't find how.Many Thanks

Hi,Actually i need to make use of "getFolderPath(CabinetBased object)" .It is in wt.folder.FolderHelper apican any one brief me how to initialize CabinetBased object in windchill 9Thanks in adavnce.Regards - Raj

Had a client recently mandate all their data must be managed through ProjectLink. Does Windchill have to be installed at each supplier in order for data to flow without issue?thanks

Hello all,I create .stl files which are used by our software guys to program a robot. I was asked today about the options which I used to create my .stl files. I showed them the small option box which come up when I save a .stl file. What they were wanting to know was which triangulation algorthm is used and if we have any options about picking them.I told them I would look into it. But typical google searches have failed me. Perhaps I am looking for the wrong thing.They gave me a link and told me that they would like to use something like this.http://en.wikipedia.org/wiki/Delaunay_triangulationHopefully I am providing enough information. I still need to go do some reading to figure out the details. But does anyone know if you can pick the algorithm usded for triangulationThank you in advance,Josh

how to enable creation of jpeg file for the model or asm in proe wf3. Is there any preference or something specific to that ..?

I am looking for something that shows differnt symbols and icons used in Creo. Specifically symbols used in the Configuration Ediitor.

Is there a re-form/bend back after flatten form?

All,Am looking at refreshing our materials libraries prior to going to Creo, wondered if any of you had a xl spreadsheet or something they would be willing to share that has various materials and their material properties or a good online resource to get this information so I can create the new mtl files.Just trying to save some time trawling through the engineering handbooks checking everything again (Although will check anything I get back)Cheers all

Eagerly waiting for PLanetPTC 2012 Orlando. Last year had fun and interesting time at Las Vegas, hoping to get more at Orlando!!!will be displaying two products at Geometric booth # 611 both Creo Ready!! during Solutions Expohttp://www.dfmpro.comhttp://www.geomcaliper.comlove those networking sessionRegards,Prashant

Anyone know where to get HVAC 3D CAD models?Wayne

According to the product calendar Creo 1.0 support ends in September ofthis year.

Anyone using an HP T790 plotter? If so which driver are you using?

After i assemble a manikin into my model and try turn on the vision conesiwasgiven an error 'Could not access vision cones (missing model)'. Is it because of a missing file or due to my proe having only manikin lite. I dont know whether the version i am having is a lite. Also, if i need to have it upgraded, which version should i be buying to access just vision cones.

2 great replies:------1.Here is an extremely useful video that I stumbled across about a year ago... Thanks to Leo Greene!

I do not know what they did to Creo but inserting od parts using interfaces doesnt work anything like it use to. i just don't unsderstand why things that work PTC feels they have to change and the things that don't work tjhey ignore.no real question just frustraion.

unable to i want to remove a quadrangle in 0.1"×0.005" with two 0.001" rounds using a revolve cut in Pro/E WF5.0 M120.when i open iges file in Pro/E some times i see that it is imported as only surfaces and some times as solid.is there any options that we need to check with while opening the igs model?

I just wanted to share this because I thought it was amazing! We took 30 pictures of a platewith an iPad running the appand a model was automatically created.By opening the scene in the desktop version, I exported as an .OBJ file which could then be opened in ProE!http://www.123dapp.com/catch

who knows about hae we can have a vibration analysis in pro mechanica?

What is CGM4?I have IsoDraw 7.0 - can I output a CGM4 file?

you should definitely check this thing out