CAD

Good afternoon friends of the community, I am new to using Mathcad. I have a problem getting data from a general graph for an area smaller than the interior as shown in the graph. My version of Mathcad Prime is V.9.0   Thank you for your attention.   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- interpolacion en graficos Muy buenas tardes amigos de la comunidad, soy nuevo en el uso del mathcad. Tengo un problema en la obtención de datos a partir de un grafico general para un área menor al interior como se muestra en el grafico. Mi versión de mathcad Prime es V.9.0 Gracias por la atención.  

Hi, I'm cleaning my config.pro file. It has very old options such as this one below which seems to be a hidden one. I didn't find anything related. Anyone knows what this option does ? 

Hi all, I am on Creo Parametric 8.0.5.0. I am attempting to give a skeleton part a parameter, create published geometry of it, use copy geom in another part to pull in geometry and this parameter, and then display this parameter on the drawing in a pre-established repeat region. This needs to be done with as little adjustments to the top level part as possible. I've accomplished half of this so far by creating the parameter at the surface, body, or curve level of the skeleton part so it is included in the published geometry. When I pull the published geometry into a part using copy geom, the parameter appears in the part if I look at parameters at all sublevels of the part. However, the BOM repeat region that I am using uses mdl.param.name to find and add items with a certain prefix to the repeat region. I am assuming that it is reading parameters made at the part level NOT at feature, surface, etc level so it will not populate anything coming from the copy geom parameters si

Has anyone used Infor PLM with Creo? Our products are highly customizable.  We are in a multi CAD environment. One location is using Inventor and Vault and the other location is using Creo and Windchill as PDM. We are using Infor CPQ that coordinates all our system (Sales, Engineering and ERP). We are looking for a full PLM solution. One of the possibilities is to change our CAD system to single vendor system either PTC or Autodesk. But that is not an easy process. We are still using our Engineering data that are more than 15 years old. Migrating them to a single CAD system will be a humongous task. We are thinking of leaving the CAD systems as they are and building a PLM solution that communicates well with our CPQ and ERP and integrates our CAD and PDM systems. Infor PLM is one of the contenders of our PLM solution among Windchill and Aras. Does it work seamlessly with Creo? Is it at par with Windchill? Any major issue or drawback that we need to be aware of?

"Generally, the good practice in defining sketches/sections is to prefer constraints over dimensions, and to prefer surfaces as references over edges/vertices."   This statement came from the PTC R&D team in the context of a discussion involving constraints of a sketch and the resultant feature. I was having difficulty capturing the design intent to produce the desired outcome in the geometry of the part.  The desired result was achievable but only by implementing some unorthodox sketch constraints. The geometry is proprietary so I will not be posting it here.   Has anyone had training on Creo since the intent manager has been deployed as the only sketch environment, and if so do you recall this paradigm from the training? Are there any other resources that explain in detail the algorithms in intent manager with examples of outliers and solutions?   The closest thing I can find on PTC.com is a tutorial titled "Understand Construction Geometry Theory".  &nbs

Hi everyone,I wanted to better understand the difference between the options Create and exclude shrinkwrap and Exclude and create Shrinkwrap (I attach image 1)It is indicated in the help but I did not understand it. Thanks,Matteo

Hi there, I have an odd "thing" in Creo and/or Windchill.When I create a new Object (like a Assembly) and I edit its parameters, the lifecycle state is set to "Released": only if I upload the file, the correct state is displayed: @unknown: Is this behavior intended or is this a bug? I am using Creo 10.0.5.0 with Windchill 12.0.2.19   

PTC held a webinar on 8/20/2024 called Advanced Controls Crash Course. No questions were taken during the webinar. Instead, attendees were asked to type their questions in the chat area. These questions were then supposed to be answered later. Has anyone seen a list of the questions and answers? Where would one find this information? A question that I had asked was, "Is it possible to expand/collapse areas using the new controls?" I really would like to get an answer. I have searched through the Knowledge Base and it appears it could be done in previous versions using the on-board script editor. MC Prime 10 does not include an on-board script editor. You can only edit the script in a control. Is it possible to see the "code" behind MC areas?

Hello, I am a student in Mechanical Engineering and I am looking to make a so-called hypoidal pinion.I want this pinion to be parametric, I have already done 90% of the work but I am stuck.I am trying to find a curve that allows me to start from the top of the cone to a pitch circle where the tooth of my pinion is defined. This curve must have a BETA parameter that allows me to manage the inclination of the teeth. The problem is that my curve goes too far, and I don't know how to limit the h factor in my equation, as you can see here ->My curve must take into account the following parameters (I think):Spiral angle (β): This is the angle of the spiral of the tooth.Pressure angle (𝛼): This is the angle formed by the line of action with the transverse plane.Base radius (𝑟𝑏): This is the radius at the base (primitive) of the cone where the teeth begin.Module (𝑚): This is the measure that connects the distance between two consecutive teeth on the pitch circle.Taper angle (𝛾):

Hello, community! When I import a stl file, I have no way of knowing whether it is closed (other than the visual search for a green colored hole). Is there a simple way to ensure that the imported STL file is closed? I appreciate the responses in advance.Thanks

Hi,  Mechanical engineering student here, I'm trying to use MathCAD Prime 7 to solve for unknown variables in a linear equation using the symbolic solve function. All I seem to get is the spinning yellow disc loading icon. Can anyone help? I have attached the file in question. 

Hello, There was a function ProPtntbl_remove_instance() in Pro/Develop. What is the equivalent function for this to remove instance from Pattern Table using Toolkit.  Thank You

Hello,my new laptop doesn't have an ethernet plug with its own Physical address, and depending on where I work I plug it into different docking stations which have an ethernet plug and their own physical address.I have a nodelock license, so which Host ID should I enter into the licensing page?Right now I'm at the office plugged into a docking station, and cmd-ipconfig shows my host id is 30-13-8B-EF-C2-A9.When I start the Creo installer it shows the same host id. So I get a license file for this host id, load the file in the License window, and I get a Not suitable error.I contacted PTC licensing support and the seem to be clueless on this issue, any ideas or possible solutions?Thank you!Guido 

Hi,On Mathcad 15 I used a VB script to recalculate the worksheet using a "worksheet.Recalculate()" comment assigned to a button, but this comment not working on the PTC Mathcad Prime API.Can you help me to solve this.

Hi, im working on a university project and new to the whole top-down design game.I have already created a sketch and some datum planes in my skeleton model. (I have many variables, so there is a lot of references).Next, I have published some of the sketches as a publish-geometry, so i can use it as a sketch for my parts which will be part of my assembly. Now Ive got the problem that i just cant get the copied sketch to work like a normal sketch for revolving or extruding parts. I have already tried moving the copy-geometry around inside of my model tree (main assemby, subassembly, part), but the only way I could imagine using the copied sketch as a revolve/extrude sketch is by referencing every single line inside of my copied sketch and using it to make a new sketch, which just does not seem rigth. Sadly, I also cant find any tutorials on this specific problem, because everyone uses the copy-geometry feature for already existig parts and not sketches.Bonus question:

How can I use bode function in prime? 

hi,I have creat a mapkey in the 3D model,but when I work in the 2D model,the mapkeys do not work,

I'm running Creo 9 and there is an option to merge bodies. Is that not possible in Creo 8?   ----------------------------------- (Note from the Moderator: this question was a comment, moved from this Creo idea)

Is there a way to regenerate the part model and assembly using ModelCHECK SAVE mode? is there a way to confirm whether the model is regenerated or not?/ family table is verified or not?/relations is verified or not? using the ModelCHECK save mode.

Hi Folks,I hope everybody here is doing fine.I was wondering if anybody knows if it is possible to create a button that simply recalculates the entire worksheet once its pushed.Thanks a lot in advance,---Shak

The autoloader fails, but I am persistent. After about the 5-6 times, it runs..... I follow the installation script, but on the Application Selection screen: the list is empty.Please help me get the 30 day demo of MathCAD.

Hi all, I've created a vector value as shown below  does anyone know how to create an 'if statement' to get the min/max results for these two vectors? Your help is kindly appreciated

Hi guys,some weeks ago we moved from onprem Atlassian Wiki Atlassian Cloud. To improve the user experience we implemented Microsoft oauth as SSO. This is working fine for all browsers but not for the embedded chromium in CREO 9. Here the browser always loses the cookies after starting a new creo session and the users have to re-login with MFA...Has anyone out there a similar experience or any hint for a solution?Thanks for your suggestions.

Hi all, I've created a vector values as shown below and I want to check the design for each of the value is pass or not.   does anyone know how to create an 'if statement' to get the results as shown below?  Thank you for your kind help.

Hello everybody,in creo 7 do i have the possibility to directly put on the table the single bodies of a multibody part?do I have the ability to shot the bodies? Do I have to extract the parts and redo an assembly? Thank you,Matteo.