CAD

Im having trouble transferring my calculations from my private Computer  ( PTC Mathcad 10 version trial) , to my university Computer (Version 9)Directly opening the new version Files, on old version is ofcourse not possibleCopy Pasting it in a external document and inserting it in the old version also does not workMy Question is, Is there any way of transferring my calculations from new to old version ?(It is not posible to make any aditional Instalations on Uni Computer) 

I want to assemble/mate two parts together, but sometimes I am unable to select the origin and destination from the ' select from graphics area' option. Can anyone please help me with it.

I have defined function with "for loop" inside for table content processing. It looks simple, but unfortunately it doesn't work. Instead of calculation results , the message  "This value mus be a scalar a matrix" is being displayed.I was using this function with Mathacad 15 and it was working fine, but I can't reproduce it within Mathcad Prime 8.Where did I go wrong? Regards,Bogdan

I am using Creo Parametric Release 9.0 and Datecode9.0.4.0Is there a better way to create a visible area on a view using shapes, or datum planes rather than just using splines that you have to free hand draw?Another question I have, is when drawing with splines, can you create a hard, one point turn if you're trying to create a square for example?

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0I am having an issue when I post my program using NC post processor (Glidemaster Lathe with Fanuc Control). I am able to post the file but the file is not imputing any decimal points in the program. I have looked under “File Formats” – “General Address Output” but am still not able to get the program to output with decimal points. Additionally, I only have the issue in my Lathe post processor.

I am looking for help in basic MANUAL wire and cable routing for Creo 10. I am trying to self-teach but it’s become clear that I will need some level of formal direction. I am not working from any wire drawings or downloads that automatically populate the paths from an electrical engineered schematic etc... I need only to represent the 3D layout of the wire routes in the top-level assembly and transfer to a 2D drawing for visual representations used in Installation Drawings only. I have midlevel modeling, assembly and detailed drawing skills to aid in my learning for this. Currently my greatest challenges are orienting my CSYS so that my Z axis (Assuming Z is a default connection for a wire path) is positioned in line to accept my desired wire path orientation. There does not appear to be any way to edit the CSYS which seems to orient randomly when placed. If I do try to edit and click on a since created centerline, it will loop it from the original Z axis pick, (90 degrees off my

When I use create dimension in the drawing without checking out the CAD model, the dimension goes missing in the drawing after check-in. Why this is happening?

When user adds a drawing to his workspace, opens the drawing, opens the model from the drawing, hidden external sketches appear.  The same is not true if the model is opened directly (not thru the drawing).  Sketches are hidden just the way the model was saved.- Sketches are on a Hidden layer in both drawing and model- Config option 'autohide_external_sketch yes' has been added.  No change in function.- Once model is opened and sketches show, if you select one sketch 'show' then hide it again, they all will hide as in the original model. I have tried opening this in Creo without any config options and get the same results. For the user to create the screen shots for different publications, they must first fix the model before creating the screen shots. or clear the workspace, load the model and open the model directly. 

Is it possible to obtain the installer and license file on a PC that can connect to the Internet, store them on a storage medium such as a DVD, and then move them to an offline PC (a PC that cannot connect to the Internet) and install them there?If there is a way to prepare something on a PC that can connect to the Internet and install it on another offline PC, please let me know the details.(Are there any functional restrictions in that case?) -----------------------------------------------Translated text from Japanese to English using Google translateSubject: mathcadのインストールはオフラインで可能かBody:- インターネットにつなぐことができるPCでインストーラやライセンスファイルなどを取得しそれらをDVDなどの記憶媒体に格納し、オフラインのPC（インターネットにつなぐことのできないPC）へ移動しインストールすることは可能でしょうか。インターネットにつなぐことができるPCで何かしら準備をして、オフラインの別PCへインストールする手段があれば詳細をご教示ください。（その際、機能制限などはないでしょうか。）- By community moderation team.-----------------------------------------------

Is there a document that explains all of the trail file functionality in depth? I can only seem to find top level information but looking for something that actually describes the details of functions

I am trying to get a pressure-enthalpy diagram for methane by using Coolprop but I am constantly getting Pressure_out_of_range error. Does anyone know the solution?

Creo version 10.0.3.0Datum Plane is modeled through a sketched point and parallel to another plane. The sketched point moves to a different position after a dimension change and model regeneration. Plane does not update position after model is regenerated, and related features crash. After "redefine" is used to enter Datum Plane creation dialogue box, "OK" is selected without any change to feature definition.Plane then updates position as expected and failed features resolve by themselves.

*Using Creo 10 currently* The background on this is I have an assembly with a bunch of parts that are only slightly different in geometry and the material, finish, etc. are all the same. The general notes on the drawing will be the same too. So this is is essentially what I'm trying to do: I would love to create one annotation feature (possible in a notebook) that can be read by all of these parts to create their general notes on the drawing. That way, If I need to update the notes at any point, I can do it in one place (again, seems like something  a notebook could do but I've tried to no avail) and update with a regeneration instead of going into all of the text and updating individually.  Is this possible? Even so, would it be too much work on the front end to set up?

License not working after reintalling computer`s operating system from a backup. I am trying to load the license file and it is not working("Invalid Host", "the host ID doesn't match the hostID specified in the license file"). Also online I cannot make the license work(i get: The remote server returned an error(403)Forbidden).

Is there a way to write the spiral curve equation in a cylindrical coordinate system in  such a way that the pitch is zero in the beginning and the end so that the curve starts and ends tangent to the start and endplanes that are normal to the trajectory center axis?  

 hihow to change unit to g/cm3  

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0  1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.comHere are the errors that I faced1. When you click Save on 3D and 2D models, you can automatically execute the program of custom mapping keys;2. Is it possible to add some verification when saving? If the verification fails, it cannot be saved;3. Is it possible to customize and adjust the options under the "File" tab;Contact: Zhu Yunbo Teil: 15895986870, Email: 15895986870@163.com----------------------------------------------------------------Translated text from Simplified Chinese to English using google translateSubject: 校验保存功能Body: 1、能够在3D和2D模型点击保存时，自动执行自定义映射键的程序； 2、

Hello, i am using creo 10 and when i try to regenerate and then save the drawing, the window says not responding.see attached error page. Br,sandeep c.

Hi Guys,I have one main assembly that has one drawing and also I include my sub-assembly and component drawing based on sheets. Can we convert it into individual drawings based on the 3D model name? Regards,Aj

there is no documentation on this.   i would like to see a number at the connector level adding up all the connection_count in the port level.  

Hi all I am having problems with PTC Mathcad Prime versions. I use the latest version, i.e. 10, but colleagues etc. use varying versions, for example 9, 8 and 7.  However, they do not have the option to upgrade to the latest version. When I send them the file saved with the latest version, they can't open it. What is the solution? The best would be a solution where I can save the file so that it can be opened in any version, because I don't always know which version the other party is using.

I am using Creo Parametric Release 8.0 and Datecode8.0.0.0Creo user is experiencing long delays opening up Creo files. Sometimes longer than 3-4 minutes. Mainly solid models. Sheetmetal models appear to be better.

Utilizing the same configuration files and settings: If I start Creo without the trail file being automatically run and run it manually it works perfectly.  Server Management - Without Trail File Ran Automatically  If I start Creo with the same trail file being run automatically the saved server is no longer shown. The trail file seems to run correctly as the second blank tab is opened successfully. Server Management - With Trail File Ran Automatically Not sure what is causing this. Trail file is very simple as it just opens a second blank tab currently.~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.pshNewPage_inside` 1~ Activate `main_dlg_cur` `EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay_ph.page_0` 1~ Trail `UI Desktop` `UI Desktop` `SmartTabs` \`selectButton main_dlg_cur@EMBED_BROWSER_SMARTAB_LAYOUT_buttons_lay page_0 0` The shortcut target is set to the following:"C:\<INSTALL_PATH>\Parametric\bin\parametric.exe" "C:\

Existe algum documento que descreva o que é perdido ao mudar do Creo Parametric para o Siemens NX? Um cliente de 20 anos deseja mudar, e precisamos de argumentos para neutralizar essa mudança. Alguém poderia me ajudar com um documento oficial da PTC ou algum comentário que possa ser usado em defesa?

Issue is that with each Creo+ update, the "Start in" setting is reset to the default.