CAD

  

I am using Creo Parametric Release 4.0 and DatecodeM140H team, i want to relocate the dimension attachement point. i used this ProSelectionDimWitnessLineGet but its not working. kindly help me to over come this issue. thank you

I want to get several options as shown in picture. could someone help me with this.Attached the Mathcad sheet. 

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0custom map keys not working after new creo install. creo_parametric_customization.ui file did not change.start up load directory the same.

Hello,I'm using Creo Parametric 10.0 and I have a quesiton.Is it possible to have table on the drawing with lengths of each profile?Example how I want this table to look like:2 PCS | Profile 50x30x2 | 250 mm3 PCS | Profile 30x30x2 | 150 mm1 PCS  | Profile 30x30x2 | 120 mmI've created generic profile model with instances and I'm changing lenght of it by "making it flexible".I want to have this "flexible" length in table.Is it possible? Thank you all for your help.

I get a 403 Forbidden error when trying to retrieve a license file over the internet.

This error occurs when we try to access the LV Wiring assembly model in our top level model.  Any suggestions on a solution?Regards

Hello everyone, I cannot for the life of me find a way to use custom symbols I created. I created a symbol using "define symbol", but when I go to use it in "symbol", it is not there. At my last company, I was able to select "custom symbol", but it's not giving me that option here. Thank you in advance.  

Hi!  I'm Johannes, and I'm currently writing my master's thesis on a Creo Parametric project that I developed during an internship at a company with a commercial license in Creo. Now that I have finished the internship and am no longer employed by the company, I still need access to my Creo files for screenshots and dimensions from the assembly. I downloaded the student version of Creo 9 but cannot open the files I created with the commercial licence. Is there any way or workaround to open the commercial files with the student version? Or is there an affordable licence for about 1 or 2 weeks to upgrade my student licence, allowing me to open the CAD files created with the commercial licence? I hope someone can help me! Kind regards Johannes 

Hi,I am trying to solve a cubic equation, but I am unsure where I am going wrong. Please guide me. I manually calculated the values as follows:x1= 1231.629mm, x2=121.978mm, x3=-153.60mmThe Mathcad file is attached : Mathcad Prime09I tried two different method but not sure where I'm doing mistake 

We can manually control whether a parameter is designated in the parameter interface.   I want to know if we can control whether a parameter is designated or not through another parameter.   Like, When Control_parameter==YES, Parameter A is designated. When Control_parameter==NO, Parameter A is not designated.    

The "branch" command does not allow me to select the line to connect the tubes, what could be happening?   (view in My Videos)

How to construct ProIDTable for the assembly component I got throgh ProSolidFeatVisit api. Need assembly component path for the collected part file. ProIDTable id_table = {Array[0].id} works for the part file collected from the top level. If the required part file present inside a subassembly, this logic fails. Tried getting asm comppath typecasting ProFeature* Array to Proselection as below, didn't work. ProSelectionAsmcomppathGet((ProSelection)&Array[0], &compPath). Any ideas please?

I’m having an issue with trying to get a User defined parameter PIPE_DESCRIPTION from the linestock to the piping start part parameter DESCRIPTION.This is so when creating a pipe solid, each pipe part will have the PIPE_DESCRIPTION parameter value added to the DESCRIPTION parameter.Then I can bring this into my table BOM, along with all the other fittings and parts which have the same parameter.Is this possible or is there another way?I'm using Creo Parametric 10.0.4.0

Where is the ProRasterFileWrite API.Why can't I find it？I want to take screenshot for graphics area in Creo Parametric through toolkit.

In Creo 6.0, I am trying to create a simulation file that uses the family table to bring in the desired instance. The simulation setups (constraints, forces) fail when switching instances. I believe this is because when selecting surface regions, simulate cannot reference the feature as the part files usually do in the family table. Simulate loses the surface region reference because it is trying to access the specific feature from the specific instance where the simulation setup is created. Is there a way around this, or is this possible in newer versions of creo?

Hi, I have to import a CAD file from ALTIUM software.The CAD file is an electronic board exported by the software ALTIUM in a 25 MB .step (or 20 MB .x_t).ALTIUM can export the files format in the picture below.When I import this two types of files, they opens in a long time.How can I reduce the time of uploading of that types of CAD models?  Best regards, Michele Barile 

I'm a mathcad prime 10 user. I'm writing a worksheet for a study material and design check. In manual, its calculated value is a little bit different from the equation above. I wonder how accurate with what significant figures the mathCAD prime 10 does calculation even in every single term in the equation. Plus, how can I get the more accurate result with very accurate single term in the equation?

I'm a mathcad prime 10 user. How can I get results in a column vector Q with respect to each coefficient Ai and Bi? I need to have Q1 with respect to A1, B1 and Q2 with respect to A3, B3? It doesn't really work out in method 1 and 2. The correct result should be the value in method 3 when considering Q1 only. 

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Error message: "Customizing parts is not available in the standard version. Please contact your account manager to upgrade." when trying to add a fastner to an assembly. This was available for us in Creo 10.

Our requirement on the shield port/drain wire is assigned to multiconductor cable. Both sides of the cable is connected but the shield port/drain wire is terminated (connected) at one end of connector and unterminated (not connected/open) at the other end of connector. Once the unterminated shield wire is defined in schematics, it needs to be exported into XML and use it parametrically in the harness drawing without doing any additional manual work in the Creo cabling. What is the best possible solution to have a shield port/drain wire as Unterminated. We use CS 7.0 and there is a document available in PTC website. But the info is not sufficient for us to define and use the shield port/drain wire as Unterminated parametrically. Any additional information or videos can really help the users to understand better.

Working in Creo 10 I have a note on a drawing that I need to call out a combined surface area for two separate areas on the part. With single surface areas I like to drive the note parametrically by creating a measure feature in the model and referencing it in the drawing note with "&AREA:FID_XXXXXX[.1].Which ends up with this, which is what I want.However, to have both surface areas in one note I have to add them manually and input them as text, non-parametric. I've been trying various takes on this: "&area:fid_xxxxx1+xxxxx2" with no luck. Does anyone know how to combine both values into one parametric note?  

Hello Support,after installing Creo Schematics 9.0, when starting and closing the Creo Schematics application, our EDR software detects the .bat script that Creo wants to run every time. Each time it is a random name, for example "bg-hpul3.bat".The file has a different name and SHA each time. The only common point is the file location, for example "'c:\users\username\appdata\local\temp\bg-hpul3.bat".1. Do you know what the following script calls?2. Is this script responsible for some Creo Schematics functionality?

Is there a way to ressign the values to a variable in mathcad programming?For example Es is 2.175 and Ec is 3.5 in a loop. Ec is fixed here and iterate Es until MEd is almost equal to MRd. If it doesn't happen then change the values of Es to 25 which is fixed and Ec iterated from 0 to 3.5 until MEd is almost equal to MRd. How to write a Mathcad program without repeating the steps.  

Hello, Does anyone know if Creo 8 or 11 will display higher than 1080p. We are getting new offices and are trying to decide on new monitors. Does anyone know if 1440p is worth it from experience when you mainly use Creo?  Thanks in advance, Lex