CAD

Hi,Initially was like that: And the result looks ok:   But after I changed:   Why is so?I have another sheet (see Untitled-18_MCP9) where odesolve work good with Id function:

I need to generate a function which has three values (Beta , alfa and distance )when Beta values will be the mean operator for example when beta=0 the function will run in all alfa and distance values to find the solutionThen it goes to the second beta value=15 and do the same .....until it does for all 24 values of beta in my excel sheet I have 24 tables , I attached the excel and mathcad sheetsI tried to do it as follows but it didn't work ?  

I want to install Mathcad 15.0 free trial to be able to work on XMCD file extensions but can't find the download link. I have PTC Mathcad Prime, but it can not work on these files.

Hi there, I'm tring to develop a program with using Pro/Toolkit and it needs item IDs (not feature ID) for parts and detum planes.How can I see them with Creo Parametric?

good evening, I have a problem in closing the boubdary blend of this propeller. I'm trying in every way but I can't. Can anyone help me ?? Thanks

*I thought this was a customer service ticket, thanks for any help the community can provide*Attempting to install Matchad Prime1.0 on new computer after previous one stopped working. I currently am logging in under trial but it should be a full version (my understanding). I have entered the product code listed for this Open Ticket, and during the installation I provide my username and password for this PTC account. When I try to proceed the installation from this step I get the error 'The remote server returned and error: (403) Forbidden'. I'm just curious what this error code means, how to rectify, and if this is something we can fix with the product code I have been provided. This was also initially purchased and installed some time ago so I am curious if there is an issue with things being out of date. Thank you.

Hi,Right now is as below.    I want to have something like this: is it possible?  

Hi,  

Hi all, I'm looking for best practices for including the end product assembly in a tooling assembly.  Tips on things like: Assembly mode:managing the tooling assembly combined with a (possibly) large end product assemblynot wanting the product assembly to affect the tooling BOM - simp reps? Include command?not wanting accidental changes to the product assembly while working on the tooling assembly - reference control?visual cues - product assembly distinguished from the tooling assembly Drawing mode:phantom lines for product assembly in certain views I'm the CAD admin, not a tool designer, but asking for a few of the designers in our group.  Any other considerations I might be missing? Thanks in advance! 

Hi I have a question, when you are into asm and you want open a drw of part you can with the macro or not? because if I try to open a drw of prt not open a prt but open the drw of asm   Thank You

When adding Integer 1 in unattached note in creo drawing, its printing as I, attached the Image.The same is working in my colleague's creo.Any configuration need to be done?Creo Version : 9.0.3

i NEED TO DOWNKOAD AND INSTALL THE PROGRAM IN A NEW COMPUTER AS THE OLD INSTALLATION IS OUT OF WORK. PLEASE HELP ME WITH THIS. THANKS.

I want to use the a=log10V

Is there a way to set a specific call out a specific UI file in a psf? I am encountering an issue where users click on the Live Simulation tab and it pulls a license for that feature. We have a limited number of them.  The psf is set up to not pull the license initially but that does not prevent the license being pulled in session after clicking on the tab. IMO Creo should not allow that license to be pull just because someone clicks on a tab but it does. I dont really want to turn off the tab on the ribbon as its annoying to have to go in and turn it back on when some actually wants to use it. Is there a way I can call out a specific ui file when starting creo either through the psf or other means?

Hello everyone in the community! I have a small problem: some fonts disappeared after uninstalling PRIME 9 and then installing PRIME 10. In Windows Character Map, the Math unimath fonts have disappeared. How can I recover them without having to do a system restore with the hope that those fonts will be recovered?

Hi,

working on an excel component in Prim 8, that is just over one page.  how do I scale to fit page?  without adding or remove cells. 

As per the original post.    Hi there,   I'm having a similar issue where I renamed an uploaded part that I had checked out. I'm now getting the same error (Error: File name changed).   I tried updating the part, synchronizing and updating my workspace and nothing has fixed this... I get the following messages in the console when I did those actions:   Nothing is Out Of Date in Workspace.All the objects in session are up to date.Nothing to Synchronize from server side workspace.   Any idea what else could help?   Thanks!

 If boundary conditions are:  on the left bound ; on the right bound ;Initial condition is T(x,0)=300KObtain temperature distribution on each moment of time and each  point of the dimension space(t0=0, tf=150 sec).

Check out this video on Creo NC Turning from PTC Application Engineers. Presenters:  Lee Goodwin (Solution Consultant, Principal), Lino Tozzi (Technical Specialist, Fellow) & Tom Quaglia (Creo Segment Sales).  

  I'm trying to write this expression in mathcad to get the same results which I have in Excel However, I'm getting that wrong answers, can you please help me     

Good morning everyone, I found that split body option is very atractive for a way of designing for my company and i would like to introduce it for other designers. Before i do that, i need to solve one problem and thats why im asking you for help. Problem:I have part with M10 holes in pattern and i want to divide this part in two separately with SPLIT BODY option. After dividing a part i use CREATE PART FROM BODY to save new part. Everything is ok until i open new part. new part is missing surfaces (for example - threads of M10 holes). I cannot find any solution for this problem. If anyone has idea how to copy it or at least, how to mark thread after split body divinding, i will be very grateful. FYI, i work in CREO 7. best regards,Szymon Biela

Hello, In Creo Manufacturing, I would like to use Auto-Drilling for counterbored screws. Does anyone have experience with how to input the hole dimension values into a Custom cycle, or alternatively, in which drilling cycle could I input these values from a table? Thank you in advance for your assistance. 

How do I implement something like the video linked below in Creo Parametric?Please explain in detail how to implement it. https://www.youtube.com/watch?v=0_IxaoZpBjk

Hi everyone,I am trying to solve a problem. I don't know about the implication and equivalence functions. I tried using chatgpt but got a weird answer which I completely did not understand. I copied the answer to Mathcad Prime which is attached below.Please help me out I will be thankful to you. Thank youRegardsKhalid