CAD

Is there a way to set the drawing default hatching to use model hatch? I have not seen anything in the config or DTL file to allow this. We are using Creo 9.  

Could not read from Model Tree config file  

Is it possible to save column in variable element ?I tested to export this session after the modification using  creo_parametric_customization.ui but my modification is not supported in creo_parametric_customization.uiHave you already tested this customisation? Thank you for your help  

This problem involves reconstructing an annular surface using datum points-->curves and the boundary blend surface feature.  I have created a set of circumferential curves and radial curves to be used as the two directions.The circumferential datum curves have the ends condition set to either tangent or curvature using a smaller curve segment created from the same point set.  I do not know of any other way to generate a closed continuous/smooth curve from points than this.  When I create the boundary blend surface, the result is a quilt with a small sliver surface in the region where the ends of my datum curves exist.  How can I eliminate/avoid this sliver surface and instead generate a single continuous/smooth surface?    

hello again! Can someone convert my XMCD files to prime 8, please. My Mathcad Prime 8 doesn't have the option to convert it even though I tried to reinstall it. 

With the new UI, where did the hatch properties get placed? I would just like to change the spacing and am puzzled where they hid this property.  

Hi all, I would like to know if exist a parameter to set up for not create a fastener file everytime I add a fastner into a assembly.If I insert a new fastner using IFX, I will have  a prt file inside the folder of my project. Is it possible to save all the fastnere that I will use in every assembly in a single folder so is not necessary to re-crate a new file everytime I will insert that fastner in another assembly? Thanks      

HiI'm trying to analyse a beam under semi-ellipse load. In the analyses I try to form shear load, bending moment, slope and deflection functions with integrationof load function.If I use symbolic solution method the resulting functions become too complex.Could someone help me by making an example of determination of the shear load function?I hope that with one example, I would be able to solve the rest...Thanks in advance. 

I am using Creo Parametric Release 4.0 and DatecodeM030There is an attribute called Last Modified (PTC_WM_Modified_on ) for EPM object under the visualization and attribute group. I wanted to change the value for it.PTC Suggested below articles and we followed it. But, those are not working as expected. We have documented each and everything.https://www.ptc.com/en/support/article/cs49539https://www.ptc.com/en/support/article/CS232016

Does anyone know if there's a way to parameterize the flag notes in such a way that those in the notes block and the rest of the drawing are synced? For instance, I have a flag note 5 that is now becoming flag note 4, since I deleted a note above it and I need to keep the notes sequential. However, it is extremely tedious/annoying to go through all pages of the drawing and change those flag notes 5's to 4's individually. I find this to be problematic for larger drawings (10+ sheets). Can I control it at the notes level and have the corresponding flag notes auto-update?    

We have an assembly that the designer put too many mounting plates in. The drawing BOM showed 26 plates but only 24 columns. When he went in and removed the 2 extra plates from the assembly and then opened the drawing, he received a message that the BOM count quantity had changed from 26 to 24. All good so far, Checked out the drawing and with the change went to check it back in. Message appears that nothing has changed so nothing to check in. What is Creo thinking when it tells you that the BOM has changed but it isn't changed for checking back in? Same thing but with a dimension. Changed from a single hole diameter callout to adding a 4X. Open the drawing, get notified that the dimension has changed, but nothing to check in due to being no change. In both cases, we had to do something in the drawings to 'force' a change that Creo would recognize as a change to get the changes checked back in. Very frustrating and in both had to open the drawings twice to realize what it would take to

We are using CREO 7.0.  An associate has a Harness that she is trying to figure out if we have all the spools for.  In the model tree, it shows all the spools, but some have a small box that maybe looks like a small schematic in front of the normal spool model tree icon.  CAN anyone explain what that means?  As you can see, we have other spools that just show the normal spool icon.  The model tree looks like this:And it is the spool icon in the red box that we are curious about.thanks in advance!!!!    

We have a handful of Mathcad 8 installations that are failing and reporting an exit code of -610 back to SCCM. Does anyone know that this exit code means? Or where the installation log files are located?

Hi,I am a newbie to Creo and I recently created a small format to test it out the scale properties of a drawing. here I found 2 scale one is drawing sheet scale(!) and view scale? how to call the view scale function in the title block from a format? For this I used &scale.  

I have rectangular flanges that I have to create hole patterns for. I usually start with making a master cad file that has some automation to it, which allows me to make quick adjustments to the assembly for modified versions/sizes of the product. Rectangular hole patterns have been an issue for me. My current method is this. I create a rectangular construction sketch, using the center of the hole/duct as a reference. I put a point or circle in one of the corners of the rectangle. I then pattern the sketch using directions, with a relation that takes the length of each side and the number of holes and drives the hole spacing for each direction separate. However, that gives me all of the holes in the middle that I don't want. I just need the outline, so I go in an deselect all the center holes by hand. It's tedious but it works. The problem is when I have to adjust the number of holes, then I have to go through and fix all the selected/deselected locations. The outline pattern option do

Hi,By defauft, when I add a geometric tolerance, it looks like this :  How can I change where the line starts ? For example, like this : Thanks in advance.

Hi,   I have to use same pattern in multiple files. is there any way to create a UDF file of pattern table and use the same UDF file in part whenever required.   Creo version 8 Windchill 12   please help   Thanks, Sandeep C.  

Hello everyone,  I am using Creo 9.0.0.0, and I am trying to define a slider connection for a piston and cylinder to perform its mechanism. I used to do that several times before and it worked. But this time once I define the rotation it is telling me "Connection definition is incomplete".  as shown in the figure.  I have defined two assemblies, the first one which is the moving parts including the cylinder. The second assembly is the fixed parts including the piston.  I am not sure why it is not working with me.       

As you can see the green line is Y+ axis limit .How do I turn all 3 axis XYZ moves into X rotary Z moves?

We would like to be able to export a step file with annotations but without quilts. Currently when selecting annotations, quilts are automatically selected and greyed out so they cannot be unselected. A PTC support representative already explained there's no way around it using the standard options. Please make it possible to export a step file with annotations but without quilts (product idea). Currently when we want to send a step file to our vendors (mold maker for example) it includes confusing quilts which are a potential source for errors.

Hello, this is Minkyu Hwang from IDT.   I have a few questions. 1. If you run creo parametirc, it will be executed in about 3 minutes. 2. Unable to access creo parametric internal browser.   I'm asking if there is a solution for these two problems and I am asking myself. The program version I am using is version 6.0.6.0.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- 안녕하세요, IDT 의 황민규 입니다.   몇 가지 질문이 있습니다. 1. creo parametirc 을 실행하면 약 3분 후에 실행됩니다. 2. creo parametric 내부 브라우저에 액세스할 수 없습니다.   이 두 가지 문제에 대한 해결책이 있는지 묻고 본인. 내가 사용하고 있는 프로그램 버전은 6.0.6.0 버전입니다.      

Hi Community, I'm a beginner to Creo toolkit with C++. Please suggest me, what is the best approach to learn it. My goal is to build custom applications for creo from scratch. I have basic c++ knowledge.Thanks,  

Hello everyone, I have created an assembly in creo prametric v7 from two separate parts. After completion, this assembly has File/Manage File/Rename given a new name and saved. Calling up this module works perfectly. But now when I click on Delete current object, the old file name is also displayed in the delete window for assigned objects. However, this file does not exist anywhere, neither in session nor locally on the hard disk. Any search for this old file has no result.   So why am I seeing this name as a related object in the delete window?     I'm grateful for every comment Matthew   Translated by the Community Moderation using Google Translate -----------------------------------------------------------------------------------------------   Hallo Zusammen, ich habe in creo prametric v7 eine Baugruppe erstellt, aus zwei Einzelteilen. Diese Baugruppe habe nach Fertigstellung über Datei/Datei verwalten/Umbenennen einen neuen Namen gegeben und gespeichert.

I am using Creo Parametric Release 7.0 and Datecode7.0.5.0We are trying to create a layout in creo 7 but its not its not working.please explain us how to work on it

I am using Creo Parametric Release 4.0 and DatecodeM060When Creo opens a part, whether it is command editing or moving and rotating, it will not respond for more than 10 seconds, and it will reply after 20-30 seconds of no response time, and then cycle. (Creo opens a part, whether it is command editing or moving rotation, and there will be no response within 10 seconds. The response time will be 20-30 seconds, and then loop)   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Creo打开一个零件，无论是命令编辑还是移动旋转，不超过10几秒就会无响应，无响应时间20-30秒回复，然后循环。(Creo opens a part, whether it is command editing or moving rotation, and there will be no response within 10 seconds. The response time will be 20-30 seconds, and then loop)