CAD

Creo parametric 4.0 m090 Not working through vpn but is working normally through the company networki contact our network administrator and said that everything is fine in our network.what i tried1- reinstall creo 2-changing the path to  IP / servername/ 3- some more methods i dont remember nothing works Hint : we are using Pulse vpn ,and creo works with 1 user laptop through vpn Thank you!     

I am using Creo Parametric Release 9.0 and Datecode9.0.4.0I have 3 groups in our company that use the same config.sup and config.pro.All use the same drawing formats. One group want to use dual dimensioning. I am not willing to give them different drawings with different .dtl files.Is there a way to create UDF or set a local config option that will allow them to use dual dimensioning without going thru all of the selections to set up dual dimensioning? i have the drawing .dtl file set up so that when they change to dual dimensioning, all other settings are ready to go.Just looking to shorten the 9-10 clicks per drawing to change to dual dimensioning.Here are the errors that I facedno errors

Dears, I'm stuck on learning how to apply a real PDE problem. It is an application that I can observe in my daily life involving gas, the effect of a pressure wave caused by a transient in a gas pipeline when a valve is abruptly closed at the end of the pipeline. Reading several technical papers on this matter, many numerical simulations of fast transients have been performed to solve the partial differential equation for transient flows in horizontal gas pipelines. Dorao (2011) [1], like many authors, starts the discussion with this system of PDE:  I was thinking (naive?) that I could simply solve this using the PDE Solver, but after many trials and errors, I came to a halt. I´m stuck setting the initial conditions right for the solver:T0=-0s is during a steady state. Flow, velocity, and density all are the same for the length of pipe L, from L0 at the (inlet) and L1 (outlet), as this is before the transient.After this, the flow stops:T1=+0s is the outlet valve closed.

This does not work:Error message says "variable not defined". But this works:The intention was to add an entry to the matrix at the end.This is quite odd, experimenting I found this works without the "=" sign:     

I am using Creo Parametric Release 4.0 and DatecodeM150In compatible design, the electronic side will name the compatible devices together (such as PK...RK...PRT, which should actually be two devices PK...PRT and RK...PRT), and import EMN into The device cannot be found after Creo. PTC Ronggong (Hui) said that modifying the configuration options in the config configuration file can solve this problem. Which configuration option should be modified?------------------------------------------- Translated text from Chinese to English using Google translate. By Community moderation team.Subject: 在config配置文件中修改配置选项可以解决此问题，请问是修改哪个配置选项Body: 兼容设计时，电子那边将兼容使用的器件连起来命名(例如PK...RK...PRT，实际应该是两个器件PK...PRT和RK...PRT)，将EMN导入到Creo后找不到这个器件，PTC荣工(辉)说在config配置文件中修改配置选项可以解决此问题，请问是修改哪个配置选项？-------------------------------------------

Dear Sirs,I have followed the steps to install Mathc ad Prime 7.0, but its converter doesn't seem to be working.I have some files that need to be converted. Could anyone lend me a hand in converting them?Thank you.Sincerely, Lan Article - CS156328 

We are close to rolling out Creo 9 and I have opened up a bunch of tickets regarding the hatch patterns here are the highlights:   1. There is a bug in Creo 9 where cross hatching shows up as solid: You can change this by editing the values in the hatch_pattern_scale.cfg file which is located at \Common Files\text\crosshatch. However, if you make the scale large enough so that the hatch isn't solid then the preview becomes so large you can't differentiate between the hatches. It sounds like this is getting fixed in Creo 9.0.6 (SPR 14461770). You can manually adjust the scale in the hatch edit dialog box but I was trying to avoid making my users do this for every hatch.   2. The only way to remove all of the default hatch patterns if you aren't going to use them is to edit the .pat files in the load point (or overwrite them with a startup script). You can not remove ANSI31 as that is the default pattern in the model space. If you remove that one then hatch patt

Just started using CREO Parametric 10.0.0..... and notice that there is no option to set a standard tapped hole to have a thread depth through the entire length of the hole. For example, in part modeling making a hole-set references - set Standard type - set to thru-all depth setting- add tapping - go to Shape tab - the only option for thread depth is a blind specified value. No Thru Thread option.

Dear PTC, I have an inquire about the possibility of including the new CREO+ in the license package "University Plus Edition"; I have been a satisfied user of your software with the University Plus Edition, and I recently learned about the introduction of CREO+. The enhanced features and capabilities it offers align perfectly with the evolving needs in the academic field.  PTC has the idea to add CREO+ to the current license package 'University Plus Edition' for future works? Thanks for the time

I am trying to solve this problem for integration however i am facing not convergence issue. Please help me out. Thanks  

Good morning. We currently use Pro/TOOLKIT (via .lib libraries) to communicate with Creo: launching Creo, opening a CAD file, etc... Does Creo+ offer the same toolkit functionality to communicate with it? Thank you in advance for your help. Cordially. -------------------------------------------- Translated the content from French to English using google translate. By Community moderation team.Body: Bonjour. Nous utilisons actuellement Pro/TOOLKIT (via des librairies .lib) pour communiquer avec Creo : lancement de Creo, ouverture d'un fichier CAO, etc... Creo+ propose-t-il les mêmes fonctionnalités de toolkit pour communiquer avec lui ? Merci d'avance pour votre aide. Cordialement. --------------------------------------------

Hello,The question is related to finding of solutions of the below equation:   Solution with solve:   Solution with root:   From the graph we see that the graph cuts the x-axis only in 2 points. Where can we see the other 2  solutions (which are the imaginary solutions) with the root solution on the graph that solve gives above? Or can't we seen on the graph these 2 imaginary solutions of f(x) with the root function/solution?How to find with root function the imaginary solution of the function f(x)?Mathcad Prime 8 file attached.Thank you.    

Team, I have a range variable and a function of a range variable and I need to combine these into a single matrix. The matrix would have two columns and 100 rows. Please see the attached worksheet. Thanks,Dr. Atlas

Hello All, Is there a config.pro command which unchecks the Intersection, "Automatic Update" by default. I prefer adding the intersection models manually. Thanks,

Hi, The situation is that I have an assembly of 5000 entities and I am trying to convert it to .obj file but the only way I can find is by selecting the entities individually. Is there a way or command that selects the entire assembly? Thanks, regards.  

Hello Everyone                    Kindly someone resolve this issue. We have installed Mathcad 15 and  trying to configured license path in user machine.  When trying to open application we getting this error FLEXNET LICENSING Error : -5147 Thanks 

A few days ago, I was able to use the Unicode character map to insert a subscript into a graph label.  I was surprised I could do that, but it worked as noted in the attached png file.  Today, when I opened the same Mathcad 15 file, the subscript was lost and a blank box appeared where it should be.  See the attached images.  This is the ...2.png file. Does anyone have an explanation for this? 

I am using Creo Parametric Release 7.0 and Datecode7.0.4.0I need to replace the drawing format of sheet 2 of my drawing with Custom Size, 1x1 mm, format. Using JLink

Hello,I would like to learn how to use Mathcad Prime 7 Automation API in VBA Excel.If anyone can share tutorials or examples, that would be great.The "Code Examples" in PTC Mathcad Help are for different languages, I think.Like the examples in VB.NET & VBScript, I tried to study them but struggled to understand the syntax and could not see the similarity with VBA Excel syntax (sorry, i am new to programming). thank you in advance for your help.    

Hello everyone, We are creating a Searchquerydict.xml in the path %appdata%\PTC\ProductView with the help of an excel VBA marko similar the one that can be found here: https://community.ptc.com/t5/3D-Part-Assembly-Design/Using-excel-to-build-simplified-reps/m-p/648567/highlight/true#M1085 The idea is to directly load only a certain amount of children of their "mother" model when starting CreoView.  With the marko/the .xml  we can predefine a MCAD search but we still have to start the search manually by starting the MCAD search and selecting the saved query. As an example of the search we want to predefine please see the attached picture.  B.R.Tobias 

Hello, When we try to import step assemblies in Creo 10, there is a model check message that we have to click many times before the assembly opens. Do you know how to avoid this? I already tried to see in the config options if there is a setting i could change but couldnt find something that makes sense.  Thanks    

Hi Community,   I would like to query the status of a prt, asm, drw with Excel VBA. So whether an object is checked out, new, in progress, etc.   I found the status for checked out in the API "IpfcServer --> IsObjectCheckedOut(WorkspaceName as String, ObjectName as String) as Boolean " But I can't find any function/method for status "New" or "Work in progress". I would like to check beforehand whether an object is mutable. Does anyone have any ideas on this please?   Greetings Hannes   Translated by the Community Moderation using Google Translate   ich möchte gerne den Status eines prt, asm, drw mit Excel VBA abfragen. Also ob ein Objekt ausgescheck, Neu, in Arbeit usw. ist. Den Staus für ausgecheckt hab ich in der API gefunden "IpfcServer --> IsObjectCheckedOut(WorkspaceName as String, ObjectName as String) as Boolean " Aber für Status "Neu" oder "in Arbeit" kann ich keine Funktion/Methode finden. Ich möchte vorher prüfen, ob ein Objekt änderbar ist. Hat

I have created a mapkey to open a .prt and import to .stp(refer config2.pro). I succeed on that one. But I also have several .prts to convert to .stp. so I copy the mapkey, pasted various instances and replaced the .prt names(config3). but it didnt work. later i found some tools from here Repeatable Mapkey Generator – 4K Side and that one works.how did that work mine gives error? 

Hello, Regeneration is not happened properly in Creo schematic and i get the Error " Error Occured While loading the Catalog". Reference snap attached. Please suggest to fix the issue   

Hello community, I am working on creo 9.0.2.0 I am defining my own struct as this:typedef struct ParmNote {struct ParmNote *Next;struct ParmNote *Last;char Note[120];wchar_t wcNote[120];}NOTE_PARAM; In a later function I have: {NOTE_PARAM *Current , *Next , *Last , *First;First = (NOTE_PARAM *)(mParm->PString);Last = First->Last;Current = Last;Next = (NOTE_PARAM *)malloc(sizeof (NOTE_PARAM));Current->Next = Next;First->Last = Next;Current = Next;Current->Next = NULL;} When it reaches the underlined line of code "Current->Next = Next;", creo fatally crashes. I do not understand why this is causing Creo to crash, as this exact logic worked in Creo 5. Any and all help would be appreciated. Thank you,Mark Hardebeck