CAD

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0Creo is sometimes loading the incorrect workspace cache. This is resolved by closing and reopening Creo but this is slowing down productivity.

I have an imported image (company logo) saved in a generic drawing format. When I attempt to copy that drawing format (using "Copy from Other Drawing" and "Entire Sheet") into a new drawing, the format shows up WITHOUT the image. Is there a way to "lock" the image into the drawing so that it will accompany the drawing when it's copied into a new one?   

Hi  I have a problem to show my results in a table where the column will be given "t" and the rows will be "Pwf". If there's anyone who can help me, please.  In the picture I use only t_0 in the formula and I would like to use all values immediately and present the result in the matrix 4x11, help me, please      

I'm not sure if I'm reading this CS134024 table correctly. We have Creo 8.0.6.0 and NX2007 (2027 minor version). Upgraded from Creo4 and NX1926. Creo8 can open (as in File/Open, change file type to NX *.prt and select "Open") an NX1926 saved file. It cannot do the same all NX2007. Does the "Open" without Unite read off of the import column compatibility? We don't have Unite but do work with both NX and Creo. Since our PLM is Windchill, Creo has to be the top-level assembly CAD for the multi-CAD projects that sometimes have to consume NX files. We definitely don't want to import and create a Creo .prt from the same existing NX .prt.  

Hello to all,   I have a part containing simple program (I am using Pro/PROGRAM functionality). I want to read input values from file. Unfortunatelly I cannot find the description of format for such input file. PTC Help and PTC Knowledge Base didn't help... Do you have some tip or link to PTC source ?   I use Creo Parametric 2.0 M020.   Martin Hanak

I am currently working on a mechanical flower where I will use a linear motion to create a radial motion from 0 to 90 degrees. The linear motion will be 40mm from a crankshaft and I am now having problems designing the rack and pinion. Is there any easy way to calculate or think about how the degrees and distances should be between the gears? I have done some research but have not found an easy way to calculate it and I would like some input on my current design. Right now I have the problem that the further the pinion moves upwards the more problems I get (see pictures). I would highly appreciate any help with this problem! Thanks in advance.     

I am using Creo Parametric Release 4.0 and DatecodeM1401 user has an issue with Creo-Windchill connectivity stability. It happens, when working with Creo, that Creo looses the connection to Windchill. The user is then asked to enter his credentials again, but these are not accepted. The user is then unable to get the connection again. restarting Creo doesn't help. The only solution found so far is restarting the computer.Please advice how we can investigate this issue. So far we have not been able to establish a sequence to reproduce this issue.Here are the errors that I facedWindchill connection lost. User must login again but user account/password is not accepted.

I am using Creo Elements/Pro Release 5.0 Datecode M070I am a new user and I am working on a assembly print and I am having some difficulty displaying (what I believe to be) the top level assembly.My current BOM displays every component that is used in that final assembly. The final assembly is composed of individual components as well as a another assembly. There is an interesting note: my table does not display the name of my sub-assembly (only the components that used in that assembly). My current repeat region table attributes are: No Duplicates, Recursive, Bln by Part, No Cbl Info. This is how the table displays:Item number (4) and (5) belong to a sub-assembly named 1F-SOMB-14-1-S. On this BOM, the sub-assembly 1F-SOMB-14-1-S is not listed.I have performed some searches on this website and on the PTC.com knowledge base and I changed my attributes from Recursive to Flat. The results were not what I expected. Items (4) and (5) were simply removed from my table even though I did not r

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0How to create 2D parts？how schematics develop the two dimensional element-----------------------------------Translated some text from simplified chinese to english using google translate on 02-Feb-2023 at 11:26am IST. Translated by vnamboodheri-----------------------------------From: 如何创建二维部件 to How to create 2D parts?

Cannot show thick cables in an exploded assembly drawing view. They show up as thin lines.      

Hi! Please, help me before I lose my mind finally. I have this simple while loop which is working just fine most of the cases but not now. I understand that the problem is with indexes but I just cannot see the solution. Please find the example file attached. So what I'm trying to do is to compare the arrays xf and hs. Please see also the attached picture. I would want to get points compared and sorted like in the picture. From smallest to largest. English is not my native so I thought the picture would be more than thousand words. Feel free also to suggest more simple way to do this if you like. Bear in mind that the dimensions and number of "i" usually changes with different cases I have. But one thing doesn't change and it's the number of equally divided spaces = 8. Thanks a lot for your advice in advance! -Harri

This is a question that will apply for some of our customers that use a master-image based IT-infrastructure (cloud, vm, deployed machines). Would there be a way to prevent the update from being executed for a certain group of users, so that admins could update the master-image when doing other updates and patches?  

to allin CREO 7 SImlive, is it possible to default the stress unit to MPa ? kPa is rather annoyingI am also looking for the option to have MPa in the 'simulation report. ThanksRegardsJohn

Asked a question that would make no sense to this community. Was not even related to CREO modeling. Had to do with a state condition that was easily resolved.

Hi! I have a very bizarre error that I just can't solve. See the following:This gives me the "units are not compatible error" if I use t_uZkplus.max. If I put the solution for t_uZkplus.max manually in the lower line it works just fine:I really don't understand what is going on here. Does anybody have an idea?

 

I'm having a problem where every time I save a .c3di file and need to open it again, the figures are no longer in the same state I left them in. When I go into the sequence steps, parts of the model have moved around to different incorrect positions. What is causing this and how can I fix it? I have had to start over twice now, thinking that it was something that I did.

I am trying to add config setting "proj_view_note_format" in my config pro file and getting below error. I found this setting in ".dtl" file. Any idea to add this setting in my config.pro?    

As shown in the picture above, I have no problems creating fillet welds and bevel groove welds when parts butt together as shown in the attachment.   But I can't get it to add a bevel groove weld when 2 parts "tee" into each other. If you reference the picture you can see that I had no issues with creating the edge prep for this weld. But I can't get it to create the bevel groove weld for the parts that "tee" together. Using the "location" tab I think I've selected every combination of surfaces and edges but still having problems.   If anybody has some helpful advice please let me know.   Thanks, Steve

I am trying to do a example from the MathCAD example "Generating Random Numbers"and it doesn't work properly. The norm function it doesn't show the proper plotting.Also the other examples from the tutorial, are hard to be plotted: scalar representation versus array.If you do a new version of software why there are no updates in the examples provided to reflect the version and changes in the software updates.Nevertheless in the example are some mistakes in the variable names that I correct them.It is something there, that I am doing wrong?   

Hello Everyone.From : refer to :https://community.ptc.com/t5/Mathcad/Gauss-Jordan-rref/m-p/273580#M106899 How to correct Gauss_Jordan.mcd for determinant ? Thanks in advance for your time and help.Best Regards.Loi.

I'm running a Structure Study in Creo Ansys and it will complete the Mesh and Solve, but will not complete the Results. It is stuck at 0%. Does anyone have a detailed solution of how to fix this issue that they are willing to share?Thanks. 

Hello community, does anybody happen to know whether there is such a thing as a config file for Mathcad Prime? The issue is that I'm fed up telling Prime after each conversion of a Mathcad 15 file that the document format is A4 and not letter. In a config file I might be able to instruct Prime to check for that parameter. Thanks in advance    

Is there still no way to set the plot font size in mathcad Prime 9  

I've got an Excel add-in that I created that used to work with CREO 4, and when upgrading to CREO 7, it now crashes both programs to desktop with no error displayed. I've updated PRO_COMM_MSG_EXE and PRO_DIRECTORY. I've run the batch files. I've tried changing PRO_DIRECTORY in case it is not updated correctly to several other options, and it throws a different error so I'm ruling that out since what I assume is correct causes the crash. Are there any tips as to what is causing the hard crash? This is occurring for several users that used to use the Excel add-in but have updated to CREO 7.This occurs not only on code that was previously working, but also on the examples in the VB API document.