CAD

Hi Experts, I have one question about Mathcad 15 integrate function.I want to calculate the area of the blue line, but I don't have any idea how to do it.I have the data for the red curve.  and I want to use this data to calculate equations (1) and Equation (2).Could you please give me some suggestions on it, thanks. Please see my attached file.     

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0(.dge) I get the following error message when I try to open the data'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'Here are the errors that I faced'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'

I'd like to make a parameter have more than one value. I know this would only cause problems for most applications and may not be possible.  Here's what I tried doing and how it failed:CALLED_FROM = "2" AND CALLED_FROM = "3"errorExtra symbols found - ignored.CALLED_FROM = ["2", "3"]errorRelation has an error.   

I want to create a curve from datum points. To do this, I have imported the datum points offset as a table and created the curve that way. Now I want to automate this process so that I can re-import the points every time I need them and update the curve automatically. Is it possible to import the points table using PRO/Program?     

Morning all.At my place of work we are running Creo 8.We are still in the early days of setting it up correctly.I want to save the config.pro file on the network so that all our users accounts point to same same location so that we all use the same configs - at the moment they are on peoples C drives. I cant seem to find a way to do this.Can anyone advise please? Thanks.

Can I make a duplicate of a part and have it in the sbom?  Example assembly didn't contain allscrews so I need to add one..   

I am using Creo Parametric Release 4.0 and DatecodeM100When opening a .stp file from a trusted source, I get a fatal error with a traceback log and then Creo closes.Here are the errors that I facedFatal error encountered. A traceback has been written to C:\PTC_User_Data\michael.baumgarten\traceback.logPlease send it to Technical Support.

Hello everyone,  I need a small information from your side. As i am performing modal analysis for my structure. My geometry is very simple made up of granite material. I would like to describe my problem in points, that would be easy to unterstand,  1. Firstly, i did the static analysis of my structure, where the outcome was acceptable. I mean to say the deformation (0.00155mm) and the stress (1.004Mpa) were under the limit.  2. Then i performed the modal analysis of my structure with same constraint and load collector, where i have selected 6 eigen mode. After the analysis I got the E1 (507.741Hz) to E6 (1358.87Hz) value.  3. Can someone explain me how to read the modal analysis results, because at each eigen value the results getting changed. Also, should I consider the deformation and the stress value from the modal analysis? Because compare to the static analysis their values are very high.  I would appreciate if anyone have a look on this concern. Thanks S

Hello,I have two question about creating views in Creo Illustrate.1.) Is it possible to create a kind of interrupted or collapsed view (or what I shou call it) to push large parts together (example: View1 and View2)?2.) Is it possible to display only a part of a view, so that it is still possible to place position numbers (callouts) on the left and right (example: View3 and View4)? Thanks and greetingsRamon Bean  

How to merge reference BOM Balloons in Creo   

Possibility to change units of flow value. Example: to have pressure in MPa and not in Pa

Hi,  I'm trying to create a sheet metal part like this from 2mm stainless steel, but I'm having problem with the last step which is unbending the part.   I get the troubleshoot message:  "highlighted sharp corners cannot be unbent. Recommended actions: Change the corresponding bend radius to a value greater than zero. If bend is not defined, add an edge bend." I've searched for this problem in the forum but cant find anything similar.  I've tried the following.- checked that the sketches have tangent between lines and curves to not have sharp edges- radius is same in the two sketches to have a consistent bend radius- experimented with using thinner material, different radii of the bends and the circular part and the corner part. longer straight lines in the circular sketch, etc. - tried creating the part in another way by creating a swept blend surface in part modeling and then offsetting the part in sheetmetal. - tried using

in the attached pics you can find the drawing done on another software using for loop, how to implement that on Creo, and is that possible to do using for loop in the parametric drawings?I need to draw this marker on each slot and it should be all the time upward (circle with a line getting from with 90 degrees wrt x-axis) as shown in the pics any help or tips would be so appreciated

I have a few instances in my code where I have a UI tree that is longer than the height of the screen and I want to scroll to a specific position.One example is when i select a tree node using ProUITreeSelectednamesSet (or otk equivalent) I want the scroll position to be set so that the selected node is visible without needing to scroll down manually and search for the highlighted node.Another example is setting the scroll position to the top after a node is added because the default seems to be to scroll to the bottom of the tree.  

Hi! I have a problem. I tried to install Mathcad on my friends computer, because i had not Windows computer, only Mac. Now I have bought Windows computer and need to install Mathcad for the university. I started to install that and got an error "you have reached the maximum number of licence requests available for your product type". Can you help me somehow?Thank you

In prior versions of Mathcad, I could create variables such as 'products' shown above. I could then create a variable like rate and assign a value of 100 products/min. Subsequent calculations would then allow me to change the units using the 'product' variable. Per the example above, I need the result of the last operation to be '300 products/min'. Is there a way to do this? It worked perfectly in Mcad 15 fwiw.Thanks

I have this callout that appears out in space. I need to relocate it but dragging the leader does nothing. I've deleted the callout and added it again but it always ends up way out. How do I fix this?  

I am using Creo Parametric Release 6.0 and Datecode6.0.4.0Threaded holes are automatically placed on our DTM_AXIS and HOLE_AXIS layers. Our policy is to have all layers turned off when the drawing is complete. This layers off the cosmetic threads. Removing these axes from the layers reinstates them in the drawing.So I guess the solution is to not have these on a layer in the first place. How do we stop just the hole axes from being added to a layer in the first place or is there a better way to handle this situation? Kind regards Greg

How to draw a Squircle shaped cylinder in creo.    

Hi all, Using Creo 4.0  I would like to ask some advice about how you would constrain this (red brownish) U shaped bracket for the shown load situation.  The bracket has 2 holes with a pin in it (so it can rotate). Both holes are loaded with force F/2.Force F is applied on a bolt that is placed in a screwthreaded hole in the bracket. I have modeled the bracket like this:For the pin hole, I use a bearing load with force F/2. I use a displacement constrain to implement symmetry on the cutting surface: I use a surface region to constrain in the axial direction of the screw hole. (cylindrical CS). This model calculates fine, but as can be expected, I have a stress peak at the side of the surface region.Not sure if that is entirely realistic. A slightly different approach is to exchange the screw hole by an 'embedded' bolt, and constrain the tip of the 'bolt': This results in a (lower) stress peak at the indicated spot below. Perhaps a

Check out this video on Design for Manufacturing with DFMPro (PTC Partner).DFMPro Presenters: Tom Van der Auwera (Regional Sales Dir - DFMPro), Pranav Khurjekar (Senior Manager - DFMPro) and Ryan Butcher (Solution Consulting, Fellow, PTC). Creo DFMPro Learning  

PTC Mathcad Prime 9 is available for download right now (March 7 to 14).   PTC has provided a by-the-facts blog of the major new and enhanced areas of functionality at this blog post.   In addition, you can watch the replay of our April 4, 2023 webinar featuring PTC Mathcad product manager Andy McGough. Andy provided demos and commentary on the new functionality, a brief update on the PTC Mathcad Prime development roadmap, and he took your questions! (Moderated by yours truly.)   If you want to hear a portion of what Andy McGough has to say about PTC Mathcad Prime 9, we published his reasons why you should upgrade to the new version in a quick chat. Whether you're a legacy Mathcad user, already a Mathcad Prime user, or new to Mathcad altogether, PTC Mathcad Prime 9 has exciting features you'll love.

Hello All, I'm trying to convert excel sheet formula into Mathcad.  Example, I want to extract P/N No. from the excel table. Stud dia and Load is the input variables. Nominal Size is the stud dia.Once stud dia is entered remaining rows with different nominal size is ruled out.Then compare input load value against excel sheet min and max load.Load value should be more than the Min load value and near to maximum load in case of multiple variables.If load value is not available in the Column 2 and 3 then same steps will be carried for parallel min and max load (column 4 & 5).Same concept was followed in excel sheet calculation. Now I need help in making calculation in Mathcad file.   Can you please help me on this problem. 

Is it possible to point deployments at a central, config.pro file? Currently we'd overwrite the local version on the computer if a change was needed, but can it instead point to a version say hosted on a server to read the settings? Also can you alter the settings before deployment, so the version of the  config.pro file deployed already has these changes? Thank you.

Check out this video on Design Automation for Creo Parametric from CadActive  & PTC Application Engineers. Presenters: Phil Cluckies (CadActive), Ben Bowman (CadActive), Lino Tozzi (Technical Specialist, Fellow), and Tom Quaglia  (Creo Segment Sales).