CAD

To ignore the output values ​​of the function at any position in the argument list, use the tilde operator. For example, ignore the first output value with a tilde. [~,name,ext] = fileparts(helpFile); You can ignore any number of function output values ​​with the tilde operator.   What should be done in mathcad to make this matlab function?   Google translate Translated by - Anurag Singh Date - 03/23/2023     Para ignorar los valores de salida de la función en cualquier posición de la lista de argumentos, utilice el operador de tilde. Por ejemplo, ignore el primer valor de salida con una tilde. [~,name,ext] = fileparts(helpFile); Puede ignorar cualquier número de valores de salida de la función con el operador de tilde. Que se debe hacer en mathcad para hacer esta funcion de matlab?    

I recently went from Mathcad Prime version 5 to 8, and now I often see errors like "This variable is undefined", where a variable seems to be undefined.However, if I put the Symbolic Evaluation arrow in the line with the definition of f(t) in the first line, the "This variable is undefined" error disappears, and I can plot the function and so on.Can anyone please tell me what is going on? I teach engineering math, and my students are getting more and more frustrated about Mathcad Prime    

I recently updated to Creo 9.0, and the images I've inserted into a notebook file have begun to not show up in the notebook.  This makes using the notebook much more difficult, since the images had references for the various input fields in the notebook.  What's really bizarre is that the problem is intermittent.  In some workspaces, it works fine.  In others, it never works.  In others, it bounces back and forth.  The config for display_images is set to yes, so I know that's not the problem.  When the images don't display, I do get a warning in the log upon opening the file: "Retrieved object was previously saved with display."  I'm not sure how to fix this problem, though.

Hello everyone, I would like to make a drawing for a sheet metal part. I got a step file which I have converted into a sheet metal part (function: Model - Operations - Convert to sheet metal part). This worked fine. See attachements "Step_File" and "Bent_Sheet_Metal". I left it so far in the state "unwind". When I create a 2D drawing from this model I would like to insert the unwinded sheet metal and the bent one. Its not important to have it on one sheet so it can be two sheets seperated (example: 1st.sheet: unwind sheet metal and 2nd.sheet bent sheet metal) To insert the unwinded sheet metal its no problem. As soon as I bent the sheet metal to its final form (like in picture "Step_File") the drawing updates itself (of course) and the part is bent again.  I searched for the problem and found this post but I dont fully understand the steps. Maybe its not even showing my problem. In my point of view its at least near to it. Can someone show me how to insert

In the Mathcad API, about a dozen events are exposed in the IMathcadPrimeEvent2 interface, including "OnWorksheetModified" and "OnWorksheetSaved". I am attempting to access the IMathcadPrimeWorksheet3 property "Modified" within these events. However, when I try to get or set this property within the event, the Mathcad worksheet/application completely freezes and does not allow the code to proceed with getting or setting this property. What's up with that? Is there any way around this? The reason I am trying to get at this "Modified" property is because, for some reason, the worksheet is only considered "modified" the first time after a save, or when saving. Not sure why this was the case.

Using Lagrangian to find the maxima for a multivariable function, solve block wont find a solution, I'm using the solve block to try and solve the functions given by the gradient of the Lagrangian. The solve block give error: No solution was found. Trying changing the guess value   Any help is appreciated      

Hello community, creating a new combined state with a new appearance state is not possible via toolkit?Is there any workaround out there? Thanks, Lars   

I'm trialling 9.0 just to get a feel for some image processing stuff, but already hit a problem: I've created a tiny matrix of grey scale values.I can write that out to a .bmp file using WRITEBMP (although I don't understand the "=0" syntax required for it to work?)I can read the bit map in again using READBMP and show the greyscale values again, so far so good. But how can I actually view the image as an image? As far as I can tell, there is no graph or plot function that can show a 2d plot of squares, each with a different shade of grey based on an 8 bit value.Neither does there appear to be another function to show the image (not the numbers) of a bitmap. I can insert a picture from file, but when I do this a.) it seems to show smoothing/interpolation between pixel values (where does this come from - if I open the image in windows Photos app it displays 9 pixels as expected ?!) and b.) it does not update if matrix values are changed. I am assuming that I am

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Problem with solid center line showing up in a drawing view. Its a offset section with a sketch where there is two lines in 90 degree The section is showed by a full unfold, partial view.Not sure if this is suppose to look like this or if its a bug or if there is any detail settings to hide the solid line that goes through the hole feature?

I want my Mathcad Prime 3.0 sheet to auto populate using a different unit than the default unit system. For example I want all my answers to be in mm (millimeters) instead of m (meters). Can I change the default so I don't have to type "mm" into every answer manually?Thanks

Dear, How to prepare the nozzle reinforcing pad in creo (refer the attached sketch) dimensionsShell OD - 3000mm x 12 thknozzle od -  1067 mm x 12 thkR.F pad OD - 2000 x 12 thk please provide the step procedure Regards,Robert   

Is there a known explanation for the next? I would think that the resulting units should be the same, but apparently not.This was with Prime 7.

Using Creo 7.0 as of today, I use the dark per-Wildfire dark background, the sketcher constraints appear black on the dark background, they appear light colored when I hover over them, is that the intent?  Sketcher appearance is grayed out so I'm unable to change the constraint color.  Is PTC trying to force people to use the default/light background???

Hi,   Can we use a specific parameter to control whether another parameter is designated or not? Linked to topic - https://community.ptc.com/t5/3D-Part-Assembly-Design/Unchecking-Designate-parameters/m-p/754245#M121251   Appreciate your help.  

I have a very simple problem as you can see below (file attached too.) I'd like to fit a line to measured data. There's something fundamental about minimize (and solving in general) that I don't understand and can't seem to find by searching through the literature. Changing TOL and CTOL have no effect. Help?  

Is there a way to "read" the *.ui file to understand what UI customization is applied? Unlike config.pro that can be edit/read via text editor, the *.ui file could not be read/edit via text editor like notepad Basically, what i am trying to achieve is to "read" the customization that is applied via the *.ui file  

Two questions. When the Designate box for a parameter is checked, it would mean that the parameter is visible in a PDM system. I understand this, but it doesn't apply to me as I don't use a PDM software. The second purpose, according to CREO Fundamentals, is (and I quote) to "make the part level feature or geometry level designated parameters appear as a component in an assembly BOM".I'm not sure what this is supposed to mean, because I believe this implies that you can't use undesignated parameters in a BOM table? Which can't be true, because I definitely have undesignated parameters linked in tables (in drawings for instance). Could someone shed some light on this? And lastly, what advantages are there to NOT designate a parameter?

Hello Everyone.How to write a symbolic evaluate Determinant code ?Thanks in advance for your time and help.Best Regards.Loi.

How do I get Mathcad Prime to give me colored coded results. If the result is Pass, return color in Green and if fails, Red? Please help  

When using Submatrix, is there a shortcut to specify the end of the column or end of the row?    

files created with MCAD 14 or MCAD 15 can be opened in MCAD 14, saved and re-opened in MCAD 15? 

I've got an OTK JAVA Free app working to create simplified reps with a method as shown below. I cannot get Creo to show any components in this simplified rep.The method should accept inputs as a Solid (the assembly that the simp rep is to be a member of), an integer sequence (I only want to show a single component, so only the index 0 is used) and an integer (only used for messages, denotes it's location in a sequence). The method should create a new simp rep with the default action to exclude all components, which it does successfully. It should then add the component with the feature number that is index 0 in the integer sequence as a master rep. This does not happen. So my question is, what should I do to the below code to make the component identified in the "is" integer sequence as index 0 appear as a master rep in the simp rep called leafsimp? At the moment I just get a simp rep with all components excluded. In the below, printMsg is a method that just calls System

I've found the series of videos for Creo Ansys, which are somewhat helpful, and I took the half day class for Creo Ansys as well.  However, I want to take a deeper dive into the various types of joints to better  understand how they function. For Creo Simulate, there are tutorials from PTC that you complete at your own pace. There are downloadable files for these tutorials so you can actually perform the tasks instead of just watching someone else do it. I haven't been able to find these types of tutorials for Creo Ansys. Does anyone know where I can find this kind of self-pace training for Creo Ansys?

I am using Creo Schematics Release 9.0 and Datecode 0.0.0How is Schematics 9.0 integrated into Windchill. The WWGM 12.1.1.1 does not offer Schematics 9.0 as an application.

I am setting up a simple beam bending simulation of a simply supported L channel.  its 3x2x.025.  It is 24" long and 2 equally spaced load of 25000# each.  When I verify my results using the bending equations I am way off.  Can anyone suggest what is going on?