CAD

Trying to Solve for Va as a variable.  Used "Solve, Va" and tried using the find (Va) function but it wont give me anything. Does anyone know any Tricks to this? 

Thanks MathCad!  It happened once again.  Program crashes AFTER I saved the file and open up the file and it is completely blank.  I have complained about this for YEARS and nothing has been done and I know it happens to others.  I am looking for a new software option because I am TIRED of losing work.

As an electrical engineer who performs worst case analysis of electrical circuits, I'd like to automate this task.  I'd like to take a parts list in Excel, and have Mathcad create the definitions for each part.  For example, my parts list has R1, 100 ohms.  I want Mathcad Prime to make the equation R1:=100Ω. Is there a way to do this?

we are using Creo 9best way convert these segmented surfaces to 1 continuous surface ?thanksRich  

If I use the Crossovers in Creo schematics, How do I manage the crossovers like add & delete what is required? Currently the same added via automatic selection, but we need an option to keep few & remove few. Kindly help. ThanksNaresh 

Hi, I would like to understand if we can add the specific standard electrical libraries from an external sources? If so what is the procedure? Kindy help.ThanksNaresh

I want to add some kind of table that can determine bend radius according to sheet thickness i am switching from solid edge

Looking for a way to put heat shrink on a harness and have it show up in the BOM. Ideally, I have a "part" for the heat shrink and I add to where ever its needed on the harness. Then it totals how much I used and throughs it into the BOM. Is this possible in the same way the spools are done? Or are there other ways to do this?

Hi team I have a doubt regarding how to calculate the smallest distance between edges using the toolkit. This is specifically for a sheet metal part.Does anyone know how to accurately calculate the edge-to-edge distances or if there’s any workaround available for this? Any help or guidance would be greatly appreciated.I've attached the image for your reference.

Hi,  Is there anyway to include level in the index for a multi-layer BOM. For example, I like to have index "1" for first level of assembly and "1.1" as the 2nd level, "1.1.1" for 3rd level and so on and so forth? This is the format of the ERP system required to import the data into it.  I am using Creo 9. In the table repeat region can only have "rpt.idex" or "rpt.level".. But "rpt.level" on show 1,2.3.. for the level.  Thanks 

We have many models that were created with an older start part, meaning that some layer rules did not get applied before the model was released. One of these critical rules is to put the auto-generated hole note on a layer and then hide it.Now we are working in an assembly with these parts in it.  These auto-generated hole notes are showing up at the assembly level.  Is there a way to hide them without revising the already released part?  Is there a layer rule that can be used to collect an annotation from a lower level part and then hide it?

I am looking for a straightforward way to add my mathcad sheet to word. The solutions I found online haven't been working well or are not very practical considering I have over 200 pages on mathcadmaybe someone knows an alternative that works for my casewhat I have tried so far is:1. Copy Paste with Keep Source Formatting:Does not respect page margins, even if I copy and paste page by page with both Mathcad and word with the same page size and margins: 2 Copy Paste with Merge Formatting:this happens when there is math inside a textbox, which happens often: it is like they are all superscripted, it looks odd 3 Print to PDF and add to word: doesn't work because word only adds the first page of the PDF 4 Snip every single page and add one by one: works but it would take too long. Also there might be a chance I will have to update my mathcad calculations and redo this process, making it very time consumingsame for: creating a PDF of every single page separately and add

Hello everyone,How can I remove the "Expand All" command from the navigation trees?It’s an extremely annoying icon.Thank you in advance for your help.Pavel

Access to Varied Items window either through Flexibility or InheritanceClick on Set Displayed ColmunsVaried Dimension Table Column Setup window is openFrom the Not Displayed list move  Assoc. Param to the Displayed listClose Creo and restart, the Assoc. Param column does not exist and needs be added again.How to save the column configuration?

Hello, I am trying to get the last index number of  a rangr but am unable. Please help. My version is Prime 10.0.1.0 Thank you 

Hi,I have installed Mathcad 11 (for students) on my Laptop.As my old Laptop is no longer in use, I need to transfer the old license to my new Laptop.How can the linense be transferred?ThanksTheo

My company recently gave us 3DCONNEXION spaceballs and they're pre-mapped with a special orientation wheel menu. I don't use a spaceball, but I would like to assign that function to one of my mouse buttons. Is this possible? 

does anyone know how to fix this creo license issue  the status of the license says unreachable

Is there a Quick Installation Guide and a Product Code for Creo 12 Student Edition? If so, where can I find them?

I am creating a template in Mathcad 15 that automatically pulls data from an excel workbook and populates various variables with that data. I want to setup a conditional textbox that displays a warning if a particular variable is 0 but is not visible otherwise. Is there a way to do this? 

Welche Lizenz benötige ich zur Verwendung von "Creo Ansys Simulation" in Creo Parametric 11.0?

Hello all,i am having a hard time trying to model a part based off the measurement report that we have gotten and i am wondering what i am doing wrong or how to more accurately model the part.  when i try to use a sweep function, i find that one or more corners (depending on if it has 3 or 4 faces) tend to be slightly off. is there a different function i can use to force creo to make a body that fits within the coordinate boundaries? the surfaces should be flat .    CREO Parametric 6.0.6.0 

Hello, I am looking to ensure a connector is related correctly to another subassembly. I would like to relate this connector to a skeleton model, but am having trouble doing so. This connector was originally brought in through ECAD/MCAD collaborator with an IDX export from my ECAD tool. If I delete all the instances from the ECAD import and manually place these related to the skeleton model I am unable to push their locations back to ECAD. I am using version 10.0.4.0. Thanks in advance for your help,Tanner

Hi everyone. I purchased a 1-year student license for Mathcad Prime Version 11. I am having some issues launching the software and need to use my Product Code. However, I do not know where to find it. If someone could tell me where I can find the Product code for the edition of Mathcad that I have purchased, that would be much appreciated. When I purchased the license for Mathcad Prime 11, I received 3 confirmation emails, one of them having a Product Key, which began with MT. However, I was made aware that this is not, in fact, the actual Product Code. Please tell me where it is located. Thank you for your help.