Creo+ and Creo Parametric

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0   Insufficient model (head ID 255) of variable reference pattern in status bar message log. and memory errors. appears and stops or shuts down. Translated by Simona Cuciureanu on 13th December 2022 using Google Translate ---------- 상태 표시줄 메세지 로그에 가변 참조 패턴의 모델(헤드 ID 255)이 부족합니다. 와 메모리 오류. 가 뜨면서 멈추거나 종료됩니다.

As per the original thread.    Dear sir @BenLoosli ,    If we have more drawings in the directory and while saving the assembly or let's say subassembly as a backup then how to figure out which drawing are utilise for the assembly. Currenlty this method is very time taken, we are currently doing manual checkup of drawing and then do save as a backup result into invest more time. If we have the pack and go functionality like solidworks then the process would be very easy, what say!

Has anyone run into problems trying to start up Creo 8 when Hyper-v is enabled? I have to uncheck Hyper-v, restart my computer to get Creo 8 to start. I don't have this problem with Creo 7 and below.

I am using Creo Parametric Release 4.0 and DatecodeF000Good AfternoonWe were having issues adding a new user to have access to the windchill server with creo parametric. Do users need to be added to to the application or is there a way to add the users based off their domain account. Or do we add it to the windchill website?Thanks,Cameron

This week, using Creo 8, I've noticed that the toggle Datum Plane function does not seem to work properly. In any instance, whether I'm in an existing part or creating a new one, the datum planes do not show up when I activate the datum plane icon. What I do notice is that when the key is activated, I can mouse scroll over where the datum plane(s) should be and it will highlight the datum plane(s) until the mouse scrolls away. If I activate a function, such as extrude (or others also seem to have the same effect) and then cancel the function before completion, the datum planes will appear. When this happens, the datum planes will now not turn off when pressing the Datum Plane icon. The Datum Axis, Datum Points, etc. seem to work as normal. Up until this week, I have never had any issues and I have not changed any config files, at least not intentionally. Has anyone seen this happen before and how was is mitigated?

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0Custom Ui dialogs are raised but are not active until user presses mouse button on them. This issue does not happen with 8.0.2.0 but happens with 8.0.3.0 and 8.0.4.0

Hi,   We are facing compatibility issues with Zeiss Calypso software where we intend to export the model based dimensions from creo to the software(Calypso). Currently, all Feature control frame annotations can be viewed via the Calypso but all the rest of the model based dimensions are missing.   Do you have any work instructions to export creo PMI informations to external softwares (CMM).   Looking forward to your response. Thanks.

Hello, On my manufacturing draws, i have a sheet for each operation (op010, 020, 030 etc.)On each sheet i have a repeat region with all sequences type, name and tool for the actual operation.  I order to simplify the operatior work, i would like to add a fifth column with the tool_pocket_number for loading the tool carousel on the machine with the right tool. Here are my column parameters : When i add &mfg.actoper.workcell.head.tooltbl.toolpocket.tool_position in the fifth column here is what i get :    How can i add for each line the tool pocket number ? Thanks in advance.

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0If you have any questions, please contact us. Can the step file created in the free trial version be opened in the official creo?   Translated by Iuliana Lazar with Google Translate on 08 Dec 2022

I need to change the number of decimal places shown in repeat region column in CREO Parametric drawings.

How to simulate the bolt pretension in creo simulate. can someone use the model in attachment for a demo with 30kN(it is axial force due to tightening torque).

Is there a way to modify the standard tolerance table within CREO Parametric 5.0.6?  I believe these tolerances are within the ANSI tolerances,  I want to update the X.XXX tolerance to be ±.003 instead of ±.001 by default.  And of course, different products will require a different default tolerance.   Thank You, 

Hello, I am using the graphics card P520 quadro from Nvidia for creo 9.0.This week suddenly an error message appeared (see attachment ...547_n.png below) during me drawing some stuff. Then when I tried rendering, the rendering screen went all black. Rendering since goes very slow and the message keeps appearing.  I updated the NVIDIA drivers, checked the OpenGL version - it is 4.6 - and wanted to check the hardware, but the latest checker software - that I could find - for this is one designed for creo 8.0. I just noticed that the program does not use the quadro graphics card, but instead the intel cpu (see troubleshoot Word file). How can I solve this issue? Thanks!

 Dear community, I created a family table for a model and I would like to edit the dimension value from other analysis results.Because it is easier to be edited, the family table should be in .txt format.If the text family table is automatically imported/exported to Creo, it is a great help to us. Is it possible to do with PRO/PROGRAM or Creo TOOLKIT? Thanks. 

At first appearance, I was excited to find out that ModelCHECK (MC) could automatically update things using ModelUPDATE (MU).  After I turned it on and tested it, I am terrified of it.  From what I can tell, MU puts all applicable features through the same blender without giving any say on the admin or user side.    For example, if you check for the following it will automatically update the model, and neither the Admin nor the User has any say in which one it will automatically do (regardless if set to Error or Warning): EXTRA_LAYERS EXTRA_PARAMS STARTPARM STARTLAYER BURIED_FEAT etc...ModelUPDATE Checks (ptc.com) This means if I have MC check to see if things are missing or provide a warning that there may be layers that are not needed, MU will auto-delete them.  But what if they are useful?  I cannot warn the user to look at them and see if they make sense!   Even worse, it will delete buried features automatically just because I want a user to lo

In part modeling, can someone explain what is the point of the copy geometry function, set for local referencing type:     A real-life example would be great.  I find that help provided in this article is not particularly useful.   Seems to me that if there was a way to transform the copy by specifying coordinate systems, then this would be more useful.  Right now though, it is just annoying that this option is pre-selected many times I initiate the copy geom command - I wonder if there is way to prevent it from being available?

Hello , I am accessing the Schematics , it has an icon to download the libraries that navigates to another site that appears bar , when I click on it I go to another site where I browse to download this Library that says that free gives error in the same , Site all the time this giving error, nor access page.Virtual Interconnect - Component Libraries main page (virtual-interconnect.co.uk)

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0creo dopo un errore irreversibile non riapre più i file.senza il caricamento delle nostre impostazioni i file si aprono.Here are the errors that I facedimpossibile aprire i file   I am using Creo Parametric Release 9.0 and Datecode9.0.0.0 creo after a fatal error no longer reopens files.without loading our settings the files open. Here are the errors that I facedunable to open files   Translated by Iuliana Lazar with Google Translate on 09 Dec 2022

I'm working on setting up standard notes for our company. I haven't found any satisfactory way to do this yet. The main failing is that Creo notes don't have formatting for numbered lists. I can create these manually, but if a standard note needs to be added or deleted, the entire note may need to be renumbered. Also, if a note needs to be resized (particularly made narrower), word wrap doesn't understand the intent of indentations and wraps to the left edge of the note, without preserving the indent.Has anyone found a way to manage this better?

As per the original post.    Does anyone know if there is a "wildcard" symbol that can be used for a mapkey?  I'm trying to create a mapkey that starts a new drawing.  It pauses for the name input, then selects the correct drawing template.  What I can't seem to get it to do is always select the highest level assembly as the default model for the drawing.  All of our highest level assemblies have a "-501" at the end of the name, with a different identifying number proceeding that.  Is there a way to make it just find the file with "-501.asm" in the name?  Coincidentally, this identifying number is also the name of the drawing - can that information be used since it is added prior to the assembly search?

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0Create a custom drawing when a new part is created. I have a start part and a drawing template with the same name and in the same directory. The drawing calls out 6 views which are named in the start part drawing. When the new drawing is created, I can see the views in the drawing tree, the model is shown in the model tree, however the drawing views are not populated with the models. If I select all the views in the drawing tree, and select edit properties, and change the display style to any other style than the drawing default and select apply, the views then become populated. I then have to re-select the display style back to the default style and select apply for the correct style view. Why would this be happening, and is there a solution to this issue? I get the same behaviour in Creo 4 M010 and Creo 8.0.3.0

Please see the attached picture together. Hi, In sheet metal, through the flat pattern, we can know the outer shell size. I was wondering if it is possible to calculate the following as well. 1. Is it possible to find the length of the inner curve of the sheet metal shape when it is unbent as shown in red in the picture?2. Is it possible to check the quantity for each corner section in sheet metal as shown in the blue check in the picture? Thanks, Warm Regards, SeonHo CHA.

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0how to check the mass propertiesHere are the errors that I facedno

In drawing. How to call out information about cables passing through particular location as a leader note pointing to this location. The note should be a parametric. So as i change cables routing, and cables passing through this location are change, the note should update automatically. Now i acquire information using Feature Information tool, copy part of this information and paste them into the note but this is not right solution. If i can get this information using feature info tool, there should be some kind of parameter containing this information

Place region has a different behavior than keep in and keep out, is it not possible to select one side, and when imported in Cadence Allegro appears to be on both side. Is it bossible to have same behvior as place keepin and place keep out. Place region: option one side is not accessible. Place keepin: Option one side only is accessible