Creo+ and Creo Parametric

HI everyone,I'm using Creo Parametric v. 9. I would like to know if there is a way in which is possible to understand if a cad is associated to a WTPart in Windchill, in order to use it into an if statement in the part/assembly relations.I could not find anything on this topic on the net.Thanks in advance to anyone who can help. 

Hi, When loading the index file file in Firefox (version 134.0.1):///<Creo 11 install.>/Common%20Files/protoolkit/protkdoc/manual0/loadApiWizard.html The tree section loads, but selecting any link on the tree does not bring up the page in the main window, it only leaves it blank: I am able to open to open a link in a new tab which works fine (but only opens the function page, so the tree is gone)It has previously worked.It also works in Edge and Chrome. Obviously not a major concern, but quite inconvenient. I wonder if anyone has experienced this also or know how to resolve? Thanks

HelloI would like to know if it is possible to leave CREO with two languages, when it opens I can select which one I want.

Dear Admin,In PTC Creo, the "Mold Cavity" and "Cast Cavity" option are disabled in the Manufacturing module. How could I enable this feature.Best regards,Shahid IqbalFig : Shown as Grayed out  

Hello, I am running Creo 10.0.4.0. I am trying to figure out if there's a way to populate a BOM in a drawing with the information of a coordinate system. For example, I would like to populate the below BOM with the coordinate system information from the below part so "TEST" would then appear in the "COORDINATE SYSTEM" column. I have tried asm->mbr->User Defined -> coordinatesystem, coordinate_system, coordinate system, and origin. Perhaps there is another keyword to reference that line item? Or perhaps another selection from the region that is not asm->mbr?   Thanks in advance

Hi everyone,I’m currently using a floating student license provided by my university, and I have a question about compatibility between the educational and commercial versions of PTC software.As part of my project, I need to design a part and an assembly that will be inserted into an existing assembly created using a commercial license. The part should remain editable even after the project is completed.Does anyone know if a part created in the educational version can be opened and modified in the commercial version without issues? Are there any restrictions or workarounds I should be aware of?Thanks in advance for any insights!SincerelyPeter

When i click setup.exe it doesnt open anything it just loads for 2 seconds and disapear. I tried turning off firewall, cmd commands, different Creo versions from 11.0-8.0 and nothing works. Help

I am using Creo Parametric Release 8.0 and Datecode8.0.11.0According to ISO 14405 - 1, it should be possible to further specify both tolerance values with a symbol in the case of asymmetrical tolerancing. E.g. ‘GN’ for upper limit and ‘LP’ for lower limit. How can the symbols be assigned to the tolerance values in Creo?

Does anyone know if there is a similiar functionality for Creo Parametric available like in the video for Creo Elements/Direct?Enhanced Multi-language Drawings Support | Creo Elements/Direct 20.6 If there is a similar Video for Creo Parametric I have not found it and I would appreciate a link to it.Or is there a solution for this functionality in MBD?

Hi I'm creating simplyfied Representations for large Assemblies using Creo 8.0.4.0 Parametrics.In the Representation Editor menu exists the option to add columns.But if I add a column and then restart the PC, the added column is disappeared again.How can I save the added column so that the column always remains? Thank you in advance.Pius

Hello PTC Community,I hope this message finds you well.I am working on a project where I need to generate a list of all components and datum planes via WebLink. The list should have three columns:Column 1: Component name /Datum Plane nameColumn 2: All available featureIDs for each component (I have attempted this with pwlMdlFeaturesGet but haven't been successful)Column 3: Identification of whether it is a datum plane, prt, or asm Here is my current code:<script language="JavaScript"> try { if (pfcIsMozilla()) netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect"); wpwl = pfcGetScript (); document.pwl = wpwl; wpwlc = wpwl.GetPWLConstants (); document.pwlc = wpwlc; wpwlf = wpwl.GetPWLFeatureConstants (); document.pwlf = wpwlf; } catch (err) { alert ("Exception caught: "+pfcGetExceptionType (err)); } function WlModelGetBOM() { var table = document.getElementById("bomTable"); table.innerHTML = ""; // Clear previous content var ret = document

What is the fiel format of a CREO part file? Binary? I am lookign at extracting the values associated with user-defined parameters defined in a CREO part. Maybe using CREOSON (just gathering info at the moment) ThanksJohn

I'm working on a weld assembly and there's something that's so extremely frustrating, I really need a solution to this.Whenever I place a weld I get the huge leader with all kind of stuff on it. For example I create a fillet weld all around a part. Ofcourse, like you would expect from Creo Parametric, the automatic All-around option doesn't work so I manually set it to yes. At this point I don't need to see the weld length. I never want to see the > shape at the end of the tail. So for every single weld I need to go to the symbol customization menu and turn off the > shape and the Weld length (which is called style for whatever reason). You can't mapkey this because the menu ID changes every time. Now comes the fun part. When I add other welds or change other welds that have no relationship whatsoever to the first weld, the whole weld symbol resets. Even its position! The company that advises us on using this CAD program, told us you have to reattach all your welds afte

Good morning everyoneI have a problem with 2d dimensioning....It happens to me like this: I select the "coordinate dimension" command, I choose the positioning,I go to select the two dimensions that I am interested in inserting.....but nothing does not insert them, highlights them but nothing they remain there in their place.....I open some old drawings and it works!!!!!!!!.....?????Can anyone give me a tip?   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   Buongiorno a tuttiHo un problema sulla quotatura 2d....Mi succede cosi': seleziono il comando " quota di coordinate",scelgo il posizionamento,Vado a selezionare le due quote che mi interessano da inserire.....ma niente non le inserisce,le evidenzia ma niente rimangono li al loro posto.....Apro dei drawing veccchi e li funziona!!!!!!!!.....?????Qualcuno sa darmi una dritta?  

I have followed the tutorial on this reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/New-to-Creo-and-visual-cosmetic-threads/m-p/986492#M137459  and it worked fine. However when I close Creo and restart the mapkey it is not working anymore.   What did I do wrong?

Hi folks,I'm wondering if it's possible manage elements that era created using the "Prismatic Elements" control.   It doesn't feel the other control on the geometry like "Maximum element size" or also the general Mesh setting as Max aspect ratio.   If you see the attached pic, where I've marked the two red brackets, I can't set the Wedge depth.   At the moment I work around this issue with the addiction of much volume regions (second pic attached). Thanks

No idea why CREO would create these COPY entries. Sometimes there are three of them for the same feature, and not necessarily in order of COPY 1 to 3.I would probably not even notice these until one of my chamfers refused to work properly on a very simple part (at the end of a cylinder).It would create the chamfer, it would show its profile in sketching, but in the end would not remove the material at all, just put some exterior rings for where the chamfer should have been. And no error was raised. Took me some time to figure out that the chamfer was applied to one of the COPY entries, even though I was clicking on the EXTRUDE feature itself.I had no idea what to do, so I deleted all the COPY entries and nothing was lost, it seemed that the part was really not affected by this -- and then the chamfer started working properly.Any ideas what these entries are and why are they created?Thank you!

I am looking for a way to create Unit Basis (Rate of Change) on a Flatness. I tried applying it in Annotate with a Composite frame, but it gives me a message stating that the "Per Unit Basis is not Compatible with the Specified Characteristic symbol." There doesn't seem to be a direct way to apply Unit Basis to Form.  I am also looking for a way to change the Tolerance Standard to ASME. It looks like ANSI and ISO are allowed out of the box. How would I add the ASME standard?  

I was working with exploded views that can be pulled from the subassemblies to the parent using the default explode. However the explode lines from the subassembly are not showing in the parent. Is that how its supposed to work or am I missing a setting that can bring the explode lines into the parent?

Hello, I have an issue here when exporting the flat state of Sheetmetal parts. DXF will be created from the drawing.We have checked off the splines option in the export menu.In most cases the splines (end points) in the exported DXF file are not connected. Our supplier needs to connect the end points by themselves.When I change splines to polylines, the end points are connected but the geometry contains only straight lines, we don't want this as well. Are there any settings we have to use to solve this issue

I have a part that shows the wireframe lines in white (for some reason, maybe the person who created it had a black background, otherwise I cannot see the reason for this).Is there a setting that controls the color of the lines in the wireframe view? Could also play with the thickness of those lines if there is a setting for that...But the COLOR is the burning issue for all parts that come with white/light gray lines.I tried Appearance --> System_Appearance color settings, but could not get it right, I found how to change the hidden lines color, but only that.Using CREO 10 on Windows 10.Many thanks!

As per the original post.    Hi BenLoosli,   In one of my project I have to update the assignee and reviewer details on drawing. So we are using the format to update this  for new also we are using format. Now to update the required parameters on drw. We are using Custom delegate. But seems like there is a glitch like sometime it is working fine and sometime it is not but in creo I can see the parameters with correct values. So I am not understanding why it is happening.    

Hi everyone, Long time viewer, first time poster.I am trying to make a chassis consisting of a swept C channel. It is consisting of a c channel changing in height but also is at an angle with reference to the original section.While looking simple, it has me quite flustured on the correct way to perform this. Got it half way there with the swept blend feature. But I am unable to rip the walls and create a flat pattern. How would you guys go about this? Keeping the model also simple to adjust. I am using CREO  4.0  Cheers, Peter 

I want to create a groove around the internal bore of a component, for an oil groove, the drawing dimensions show the start and end points as the same, so a continuous loop, but the groove moves along a helical sweep to its position 180 degrees from start, then returns to the origin.  Ive been looking at curves from equations to create the sweep profile, but struggling.  Attached a pic of the groove.

So i have been working on a project on my creo students version (creo parametric 11.0)and it seems that i am getting fatal errors frequently in some few minutes itself after opening the file.[i have been modelling with an imported IGES model.]so please find me some solutionsthis is the message im getting and dont know what to do please some one come to my aid .and i have also added my trace back log  too