Creo+ and Creo Parametric

How I validate my stress results of creo by analytical means?

I am using the creo 3.0 version of the Tolerance Analysis Extension，How do I customize an html report for Tolerance Analysis Extension，Add a dimensional chain to the report similar to the 3D model in Creo EZ Tolerance AnalysisTolerance Analysis ExtensionCreo EZ Tolerance Analysis-1Creo EZ Tolerance Analysis-2

I’m wondering if it’s possible to perform FEM simulations with the student version of Creo 11, specifically for lattice structures. Does the student version support this type of simulation? Also, is there a way to export lattice structures from Creo to Ansys Workbench for FEM analysis? Standard formats like STEP and IGES don’t work for transferring these detailed structures. If anyone has experience or knows of an alternative method for exporting lattice geometries to Ansys, I’d appreciate any advice!

Lets say I have a Creo part file in engineering. It has multiple combined states, layers, appearance states, MBD dimensions, colors etc etc added to it.  I want to make a copy of this file (for manufacturing) ...that is still linked to the origin engineering file. While also keeping the combined states, MBD dimensions, and colors etc etc of the original engineering file.   One way linked? Where If i change the engineering file...it will alter the manufacturing file, but changing the manufacturing file will NOT change the base engineering file? Is this possible? I was originally thinking of making an assembly. Adding in the original engineering part into the assembly. Then adding in a blank manufacturing part also into the assembly. Then doing a copy/solidify of the engineering file into the manufacturing file.  But I think I will lose all my combined states, colors, etc. Any other workarounds? I'm trying to keep these linked,

Hello everybody I alredy went through previous posts but I didn't find what I'm looking for. I'm trying to modify the font for drawing annotation associated to this special letter Ⓣ Ⓤ. I decompiled and compiled the stroked_iso font  and it works but it doesn't work when I modify the isofont.fnt, somebody has any idea?Thank you for your helpRegards Vincenzo

I need an option in the Publish Creo Cable network path that is visible in Creo View MCAD.

Reference topic link - https://community.ptc.com/t5/3D-Part-Assembly-Design/Find-not-attached-dimensions-in-Creo-Parametric-drawing/m-p/804323#M124597 Where do I set the color for unattached dimensions?  I cannot find the setting and I have looked everywhere.

Dear Team, We are using ‘Creo Parametric 7.0’. We have an assembly with the fastener 'Fastener_Metric.prt'. Since it is a standard component, it is controlled using the family table(Refer;'creo_family_table.png'). I would like to exclude ‘Fastener_Metric.prt’ from the section in both 3D and 2D. I excluded ‘Fastener_Metric.prt’ once(refer:'creo_exclude part.png'), but upon changing its instances, it was included in the 2d section. Is there an option to always exclude Fastener_Metric.prt and its instances from the 3D and 2D drawing sections?. Note: Instances will be changed by external configuration software based on user input.   Thanks in advance. Prakash.P  

Hi, Which bundle of Creo simulation can perform Torque & Tension analysis, Kindly advice. TIA.Naresh

Hello, where can i find the release notes just for parametric.For example, i have 10.0.3.0 and i want to see whats have changed in 10.0.6.0 or 11.0.2.0?In search i could find it just for toolkits...

I'm creating a new drawing template in Creo 9.0.7.0 for a project. I want to add a parameter to capture the 'released on' & 'released by' values. But it should be sourced from Windchill, not user defined. How we can do this.

当您保存装配体的备份时，您希望保存所有零件和工程图   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   When you save a backup of an assembly, you want to save all parts and drawings

Using Creo Parametric 10.0.4.0 I'm drawing a welding assembly and I've got welds that have arrows going through parts of the assembly.I would like to add jogs to the arrows so I can route them around the part instead. Is there any way to do this?And is there a way to move the weld symbol to another plane whilst keeping the arrows as they are. Right now, when I move the weld symbol to another plane, all the arrows move to that same plane and are no longer connected to the actual welds.Hope you can help me out! 🙂

How to enable 'Advanced Assembly Extension' by default whenever Creo is opened. We had Creo 7 previously where it was enabled always. After upgrading to Creo 9, we have to go options and enable the extension manually every time we open Creo. What setting we need to change to get it enabled permanently.

Hi CREO experts, I'm setting up new templates for my company and now I'm stuck with a font size problem probably refering to a din.dtl option. (CREO 9.0)We're using ISO Tolerance tables for shafts and holes and there is one problem with the display of the tolerances.I've set the tol_text_height_factor to 0.5. That works for all +/- tolerances, but not the limits. (see attached file)PlusMinus: Limits: As you can see the font size in the "Limit" display in the brackets is 1.0 but I want to have it 0.5 like in the "PlusMinus"Does anyone know the din.dtl or config.pro option to have the "Limits" display style the same as "Plus Minus"? Thanks in advance

We have two parameters 'DRW_RELEASED_ON' & 'DRW_RELEASED_BY' in our drawing template. Source for these parameters is Windchill. Meaning, the values for these parameters will appear automatically when the drawing is released. All this worked fine in Creo 7 When we upgraded to Creo 9, I could not see these two parameters in the drawing template. Becuase of this, values for these parameters are not getting populated after the drawing is released. Can someone help? where exactly this issue is there?

Creo Parametric 9.0.2.0The section view fails when the assembly components have been dragged.Do we also need to save a snapshot of the section view as well?

I'm using a custom menu created with J-Link to set the material in a part. The method pfcPart.Part.RetrieveMaterial works fine when the config option pro_material_dir is set to a local/network drive. However when this is set to a Windchill location using wtpub://[servername]/[material library] I get the error: com.ptc.wfc.Implementation.pfcExceptions$ToolkitNotFound. The material library location is correct (it points to the right location when manually setting the material) and the Windchill server is registered and authentication is done when starting up Creo. Do I need to make a connection to Windchill within my program before I can access items such as material files?

Looking to probatch a bunch of files from .prt and .asm to step and drawings as dxf. I am exporting from Wildfire 4.0 which just happens to be on the laptop I'm exporting from. I used to know how to do this. Does anyone have a quick guide to doing this? I don't want to spend more time figuring this out than it takes to do it manually. Thanks, WayneF

Hello, I'm trying to build a Project, wherein i get the below compilation error: Not sure where exactly is going wrong. >protoolkit_NU.lib(srcstdstream.obj) : error LNK2019: unresolved external symbol __std_find_trivial_1 referenced in function "unsigned __int64 __cdecl std::_Find_elem<char,27>(char const (&)[27],char)" (??$_Find_elem@D$0BL@@std@@YA_KAEAY0BL@$$CBDD@Z) Settings Done on Visual Studio 2019:1. Added protoolkit_NU.lib in Linker->Input->AdditionalDependencies2. Added "$(CREO_INSTALL)/otk/otk_cpp/x86e_win64/obj;$(CREO_INSTALL)/protoolkit/x86e_win64/obj;" under Linker->General->AdditionalLibraryDirectories

Dear Sirs, I hope this message finds you well. I am reaching out regarding the Creo drawing inspection function shown in the attached image. This function automatically generates a dimension report and allows for the export of dimension data to an Excel file via the "Export to XLS" button. I am looking to automate this process using Creo TOOLKIT, specifically to automatically extract dimensions and generate the report. However, I am not very experienced with programming. I would greatly appreciate any guidance, tips, or code examples on how to achieve this. Thank you in advance for your assistance!   Best regards,Lan Haydena  

Hello, im at creo parametric 7.0.9.0 and it never saves what config i am using or what directory i am working. Like always. Here is how i confi'ed' the creoin this folder especific its my config, but i tried other folders, it always open in the below foldersworking_directoryconfigshould I  write something on my config, so it becames permantly. Ive already tried chanching the file_open_default_folder with defaault, working dir, in secion but nothing workings. I did already look to some solutions on here, like chanching trought the envirment but didnt work as well.

I recently discovered an interesting trick in Creo Simulate. Normally, it is not possible to place constraints on the weighted links. When starting a static analysis, a fatal error occurs. Therefore, instead of constraints, e.g. springs to ground are required. However, if the static analysis is integrated in a fatigue analysis, Creo forgets the pre-check and calculates without problems 🤣

Hello, I am using Creo Parametric 9.0.8.0 with Windows 10. I have an odd case where it appears that Creo is measuring the volume of a part wrong. The volume output from the mass properties dialog box is showing a value of about 0.306 in^3 as shown in one of the screen shots. However, this way underestimates the volume of the part. Just the main portion in the middle can be hand calculated to about 0.7 in^3. I don't know what is wrong here. I have tried regenerating the part and swapping to fully assigned properties and then back to geometry defined, but the number does not change. Any insight is appreciated. Thanks, 

Not much fun doing detailed drawings.  I remember doing detail drawings in the early 90's on Pro/ENGINEER and being able to select 10+ drawings into memory all at once.  Does anyone know what year we lost the ability to load countless drawings?  *not that it's a big deal just being nostalgic LOL Bart Brejchadesignengine.com