Creo+ and Creo Parametric

Hello everybody,in creo 7 do i have the possibility to directly put on the table the single bodies of a multibody part?do I have the ability to shot the bodies? Do I have to extract the parts and redo an assembly? Thank you,Matteo.

Welcome to Third Angle, where today we’re diving into wave power technology. To hit net zero targets around the world, we need to harness the power of nature and smart technology. In this episode, we learn all about CorPower Ocean, supported by PTC's largest partner, PDS Vision, who are leading the way with a wave energy system that balances supply and demand without needing as much generation capacity, storage, or grid infrastructure. Our producer, Benoît Derrier, visited the company's testing center in Stockholm to see their latest prototype in action. He also spoke with Jacob Ljungbäck and Antoine Bonel, two of CorPower Ocean's talented engineers, who shared some amazing insights into their groundbreaking tech and its potential impact on renewable energy.    

Why can I not move the yellow highlighted item to below the datum planes in this assembly feature tree?  Using Creo 10.

Hello,Creo Parametric 8.0.6 I've created a mapkey to export dxf file and save drawing/part parameters then use vbscript to rename the dxf file, the mapkey works great in Creo but when i use distrubuted batch to export dxf using this mapkey it will only export the first page, is there a way to loop this for all pages in a drawing? Thanks,TTD <TTD version="1.0" created_by="PTC"><DESCRIPTION>Run a mapkey defined in a config.pro</DESCRIPTION><GROUP>Misc</GROUP><DETAILS>Will be run on any file type; user is responsible for choosing types that mapkey will operate on correctly.</DETAILS><SERVICE name="dbatchs"/><FILTER_FILE_TYPES type=".drw"/><!-- Replace "F1" with chosen mapkey when customizing file --><TKFUNC func="ProMapkeyRun" mapkey_key_sequence="dxfdet"><save_model>false</save_model></TKFUNC></TTD>

Currently running Creo Parametric 7. I'm trying to auto-populate a repeat region.  In this assembly, there are two cases:1) XXXXXX-XXXXX-000, where "000" is the component find number. This is a parameter automatically generated at the part level, and can be called via relation asm_mbr_fn2) The second case is a manually entered find number at the assembly level. This can be called via asm_mbr_cparam_find_number These cases are mutually exclusive, i.eParts that fall under case 2 do not have an automatically generated asm_mbr_fn,Parts that fall under case 1 do not have a manually entered asm_mbr_cparam_find_number The components that fall under either case also have a specific naming convention. (see "YYYY", "_XXX" and "_YYYY" below) Here is the relation I have written - but it is not working correctly, specifically the second IF statement is failing. Those cells in the table are blank.  The first IF statement works just fine - it correctly populates the part

I want to fill the symbol square with white and make the text ABC black.   1. What product and version are you running? Creo Parametric 9.0.8.0   2. Are you having issues? I want to fill the symbol square with white and make the text ABC black. I tried hatching and filling, but the text became the same color and became unreadable.   3. Are you using a workaround? If yes, please explain it. No, there is no workaround.   4. What is the use case for your organization? Explain how your idea works in a disruptive environment or how it applies to a real-world situation.   5. How is this issue currently impacting your organization? (number of users affected, lost productivity hours, etc.) I'm using the Toolkit to place symbols, but when I place the symbols on a model in a drawing, the text inside the symbols becomes hard to read.   Currently, I manually adjust the symbol position after placing the symbol, but this is time-consuming due to the large number of targ

Hello all, I am saving a step file using ProIntf3DFileWrite() but I lose all colors assigned to parts and features. They are all set to grey by default. Is there any setting/config options I need to change before saving the model? Or any alternative method to save .asm/step file without losing colors assigned?

I'm working remotely today trying to retrieve a rather large assembly.  My Creo home directory is a mapped server drive sitting at HQ.  Not recommended I believe but that is our current configuration. When I retrieve this assembly it looks like randomly named temp files are being written to my home directory, causing this retrieval to take a long time.  See circled in the attached.  Knowing this setup is not the best, why are these files being written and what can be done until we can convince our IT people to put our home directories local to our laptops? Creo 8.0.0.0,  Windchill 12. Thanks..

I can't open my Top assembly file, I applied a few notebooks for my design (Model and Assembly),I found an error message below the message log bar: "All notebooks referenced by model A will be retrieved". I tried to fix this by undeclare the notebooks in this model but it still happens with the otherIt just happened 1 day ago, before I could open it normally. Do you have any solutions for this such Crashes 

My colleague is working on a large assembly. He puts the model into an isometric orientation and saves it in the model with that orientation. Then he places a view on the drawing and picks that saved orientation and the model is rotated in the drawing view.   I have reproduced it on my machine with a brand new blank drawing. Both the model and the drawing are the same rep. There are no family tables at this level.   Has anyone else ever come across something like this? Any ideas? If no other ideas, we will just dial it in with rotating about references until its close to the iso in the model.

Hello everyone,I have been trying to extract dimensions from Creo drawings, however I'm running into issues with encoded notes.Is there a way to extract encoded notes using CREOSONthe note circled below is encoded:  (Note_44) When i try to extract it, I get a long string and value expanded as NaNthis is my code:note_list = Client.note_list(get_expanded=True)note_list_df = pd.DataFrame(note_list)note_list_df = note_list_df.drop(columns=["location"])   

Hello all, I am trying to get member of a pattern feature and delete them using toolkit. I am retrieving pattern feature using ProFeaturePatternGet and then using the ProPattern from it ProPatternMemberGet to get a members of that pattern. After getting this member how do I delete this member of pattern so as to have just header of pattern in a feature.

In Creo 7 (with Windchill/PDMLink) changing model units from inch to mm (metric) the model and drawing dimensions do not convert to commas from decimal points (decimal points remain). Was successful in previous model/drawings. I checked configs, customizations and more and they are identical from previous successes. Any thoughts are welcome.

Creo Product Insights presented by Emily Pinto, Solutions Consultant of PTC. 

One of our designers has a drawing that was saved in January and none of the parts or the assembly have been modified since then, except the skeleton file that is used for positioning the assembly. When he and I opened the drawing this morning from Windchill, most of the views have shifted locations and even dimensions on one view that did not shift have been moved from where they were in January.  This is very disturbing, especially the dimensioning and balloons moving in relation to their original placement. I can see something in the skeleton causing the model to 'move' but not dimensions to a view that has not moved. We are on Windchill 11.0 M030 CPS16 and Creo 4 M080.   Has anyone else seen this behavior?

Ich habe ein Startup Tool meiner Uni für Creo 8.0 gedownloadet. Damit hat mein alte Creo nicht funktioniert, weshalb ich es neu runtergeladen hab. Jetzt kann ich weder das neu Installierte Creo normal noch mit dem Startup Tool öffnen. Ich bekomme immer diese Fehlermeldungen. Als ich nach dem Fehlercode und einer möglichen Lösung im Forum geschaut habe, wurde mir die neu Installation des qualitiagents empfohlen, dabei bekomme ich aber immer diese Fehlermeldung: Ich finde aber keine neuere Version, die ich dementsprechend benutzen oder löschen könnte.English:I downloaded a startup tool from my university for Creo 8.0. As a result, my old version of Creo stopped working, which is why I re-downloaded it. Now, I can’t open either the newly installed Creo, nor can I open it with the startup tool. I keep getting these error messages. When I looked up the error code and a possible solution in the forum, I was advised to reinstall the quality agent. However, I keep getting this error

I am just trying to use the assembly for FEM exporting STEP.  How can i create a coordinate system by importing one from a step file or other format at the TOP level.  How can I do this while another designer has the assembly checked out / my workspace is out of date.  I do not care about updates.

I am using Creo Parametric Release 9.0 and Datecode9.0.3.0How can I embed the fonts in a .prt files ?I made a wrapping feature onto a solid part with a text using a special true type font. When I send the part (.prt file ) to my supplier (who does not have the same font) he cannot see the text with the same font.Is it possible to embed the fonts into the feature so that it does not change ?Here are the errors that I facedno error messages, different fonts on different machines with the same prt file.

The  Article - CS325902 It said that Creo OTK C++, OTK JAVA (both FREE & Licensed versions), VB API & WebLink APIs are enhanced to support Regeneration failure handling in no_resolve_mode. Hence, No Need to use the configuration option But I am still having "exception pfcExceptions.XToolkitBadContext" when using Wed.link Solid::ExecuteFeatureOps() . How to solve it?

Hello All,I have a an multiple assemblies which contains part with same name but different parameters. Is there a way to retrieve the parts parameter by its name.For example:My assembly has p1.prt, p2.prt and p3.prt. They all have a parameter weight.In drawing I want to do something like this "&weight:p1.prt".Is there a way to do this?

Hi, how i can get the postprocessor for DMG Mori 5 Axis Machine with Siemens 840 control.

Hello all,   I am seeing a small dimension discrepancy of about 0.01 between an extrusion (remove material) I did and the use of the measuring tool distance feature. I am scratching my head as to why, and I cannot figure out its cause. I attached some images and a video. The extruded cut is 3.00 but when I measure it becomes 2.99.Thank you.

Hi Community.Our company has many Creo users in different offices all over the globe. We are faced with many crashes every day, which is frustrating for users.We are running CREO 10.0.2 on new Dell Precision 5680 laptops.-i9-13900H-32GB RAM-nVidia RTX A3500 Ada Generation laptop-Win 11 Pro OSObservations: The crashes are mainly in our offices in Paris, Nantes (both France) and Jena (Germany), but not in Stockholm (Sweden), Sunnyvale (CA) and Christchurch (NZ).The Windchill server is located in Stockholm. The license server is located in Sunnyvale.The number of daily crashes depends on the graphics card driver release version. The latest one is not the most stable.At lunch break the screen is locked. After unlocking the screen the CREO window freezes  and the session is crashing immediately.Often the session is crashing if the software is reporting a license issue.Crashes with huge ASMsCrashes when creating drawings.We believe there are several root causes for these behaviors.&nbsp

Creo 7 environment. Dual dimensioned print is not acceptable.    Is it possible to use a metric (mm) part model to create an imperial (inches) 2D drawing? The parts are designed in metric units but a request for dimensioned prints using inches only has been made. If it is possible, what combination of config and detail settings will make this work in drawing mode?   The part should remain in metric, I am aware that the option to convert the part to inches and then create an inch drawing exists, but this would require maintaining the same part model in two systems of units in PLM environment. If we can drive an inch drawing with a mm part that would be the preferred solution.

I was testing my plugin on other system then creo shown this error. How to run Creo Parametric TOOLKIT applications with a Creo Parametric Session without unlocking during application development stage