Creo Modeling Questions

Hello, l´m using sketcher every day as many of us. Don´t think my work is top productive.So my question is simply: What tips, tricks or hotkeay are you using in SKETCHER MODE? Example: - press SHIFT button and drag the line to make it concident with referenceEvery ideas or links are welcomeThanks in adviceMilan Bonka

Hello community,I have a set of notes and i want to use these notes whenever i need.how to link a note with note parameter.kindly find the same.Regards,Bharath

Dear all,I need to enter nearly 100 characters  in my parameter value but creo is not allowing to takehow many characters we can put in parameter ?Regards,Bharath

Hallo zusammen,manchmal stehe ich mir selbst im Weg.Jetzt habe ich schon mehrmals die LOFT Anweisung eingesetzt und kommetrotzdem immer wieder an meine Erkenntisgrenzen.Wie erzeuge ich eine LOFT mit den Geometrien ohne die Meldung zu bekommen,"Konturen müssen geschlossen sein" ?Mit GrußWerner

Hallo,ich habe ein Problem mit meiner Lizenz. Ich bekomme folgende Fehlermeldung und weiß nicht mehr weiter!!!Ich habe ein Projekt zu erledigen und kann das Programm nicht öffnen.Bitte helft mir.Im Anhang könnt ihr die Fehlermeldung sehen. Sobald ich eins der beiden Befehle drücke schließt das Programm wieder.Gruß

Good morning -I have two users now who, after opening Creo and logging in to PDMLink get a blank white screen where their PDMLink window should be. If they open a second session of Creo and log in, PDMLink shows up as expected, and they can close the first session.Any ideas? They aren't dead in the water, but the frustration level is high.Creo 2.0, M110 / WC 10.1, M040Thanks in advance -Chrystal JohnstoneRed Dot CorporationSeattle, WA

Hallo zusammen,ich habe das Problem, dass wenn ich eine oder mehrere Arbeitsebenen mit 2D-Inhaltim "Bündel" mit abspeichern möchte, dies schon mal der Fall ist und ein andermal nichtgemacht wurde. Was natürlich dann sehr ärgerlich ist.Eine Systematik zum Arbeitsebenenspeichern habe ich nicht gefunden.Wie geht man gezielt und sicher vor?Mit GrußWerner

Create an option to Output all Operations CL dataI've created a poll for a product improvement.  I would like to see an output all operations tab in the Save a CL File button.  Quite a bit of my time is spent waiting for each output to complete just to start the next output.  If I could just pick output all operations, it would allow me to go on to other tasks while the CL data got computed.

Hi all,Is there a way to snap to 2 tables together. No some guys are doing it by eye and some are doing it with the use of coordinates.But is there a way to let them snap on each other

Are any of the members of this forum located in Australia? New Zealand?regardsAl.

Hi guys,I had an old project which is not opening with my current version of creo.Can someone convert the file in .pk2 for me please? The file is .pkgCan you give me your email so I can transfer you the file?Best

Someone mentioned that the Liveworx community did not have may people in it.  I figured this was a larger group. There is an interesting thread going on over there.  You might want to take a read.So what is your assessment of this year's Liveworx?

lors d'un analyse en mechanisme. le graphisue de l'evolution d'un angle est toujours d'un sel coté de l'axe des abcisses. Il y a t-il un Moyene d'avoir des angle et des graphique avec des angles allant de -10 deg à  60° avec ProWildfire 5.0

Hi, I am new to this website and  i am the beginner for this software. Could please help me out of this?

Etant daltonien , est il possible dans l'arbre du modèle de mettre les fonctions échouées en Bandeau fond rouge plutot que le texte en rouge ?Le texte en rouge demeure non visible pour moi.Didier

I am trying to create a button with drop down menu in quick access toolbar like a button whose name is open and in it's drop down menu option will be .prt, .asm, .drw.For example please see the attachment.

helloi have a problemi  want to constrain  two arcs tangent like photo but creo place with a offsetwere am  i wrong?

Hi,We have 4 Creo/Windchill users in China and they complain about the speed of working in Creo 3.0. We found out that the Creo Agent process is communicating intensive. This is also due to fact they have a limited bandwidth on their VPN line to Belgium. I read an article explaining that the Agent could be disabled but this is strongly discouraged. https://support.ptc.com/appserver/cs/view/solution.jsp?source=SPR Viewer&n=CS39740 Does anyone have experience with this and when disabling the Agent to what problems this can lead ?Bes regards,Bernard

Hallo zusammen,einem Element kann man über Teileeigenschaften - Material - Dichte Werte eingeben.Kann man dem Teil aber auch eine Textut (Multiplex, Sperrholz usw. mitgeben?Oder ist dies nur in der Vollversion möglich?GrußWerner

Deep thoughts for a Monday: Does anyone know if CAD functionality is "patentable"? In other words, why is it that every CAD software does not have similar processes for creating features since it's all found in calculus, physics, chemistry, Statics and Mechanics textbooks? I know that "code" is patentable and protected, but are individual features or methods of creating those features "proprietary"? Isn't and extrude and extrude in every software?  I have witnesses years of "showdowns" between CAD software "mine is better", no "mine is better" type stuff and I always wondered about this.

not able to give zero angle in sketcher to the line?

When dimensions are populated in a table file, I want them smallest to largest.  (Ex. 1.00 x 2.00 x 3.00)  I am unsure how to set up a relation to accomplish this.  I'm using Creo 3.0.  Thanks

Hi,I am new to the BMX module. Can any one suggest, the proper way of study for BMX modules.And please share the materials or sites to know about the BMX.Thanks in advance.uday

When did the PTC logo change? I must have been sleeping.

I am having trouble selecting surfaces,edges and sketches with ptc creo 2.0 m120 student edition.OS-windows 8.1.have to click multiple times for selection.