Creo Modeling Questions

In Creo I can't find this option.It's necessary for me to select 3D annotation for TAX analysis.Any help ?Thanks

I've used Autodesk for a year or so and they have this really handy tool to measure distances between models. I was wondering of PTC had a tool like this, and if so how to use it.

If you were specifying a new server for Windchill, which of the following CPUs would you go with? You could get two of either one.3.6 Ghz quad core3.46 Ghz hex coreThank you,Brian ToussaintCAD AdministratorHoshizaki America, Inc."A Superior Degree Of Reliability"618 Hwy. 74 S., Peachtree City, GA 30269Phone: (770) 487-2331 ext. 1216Fax: (770) 487-3359www.hoshizaki.com

I am attempting to sketch a complex shape. I know what I want the sketch area to be so I want to use it as a constraint so I don't have to figure out one of the other dimensions. Is this possible?Thanks in advance.-Alex

Does anyone know how to make use of this command?

Is anyone using the autoshop documentation? I am curious as to how or even if you can modify the header names on the sheets. In the acutal Process builder you can set a column width but the header seems to control how wide the colum is on the sheet.I have columns where I only need a width of about 3 or 4 units but the column header seems to set the actual width. This would be a very usefull tool for me if I could fit all my info on an A size sheet landscaped. So what I am looking to do is cut the headers down to 3 or 4 letters or the same size as my column width.

I am currently working on automating certain parts of ProE Wildfire 4.0 and have come across a problem. I can automate all parts of using Windchill in an external browser. I can even automate ProE itself by running the macros that are recorded in ProE's trail files.However, the actions that are taken inside the embedded browser are not recorded. Is there a way to get those to be recorded in the trail files as well? Or some other way/tool to use? Mapkeys do not work either. There is certain functionality like activating workspaces that can only be done within the embedded browser...Thanks.

Can anyone recommend a way to round a vertex, such as the vertex of a pyramid or cube, such that the vertex is rounded but all the edges remain sharp? I'm sure I've done this before but I can't see any options for it.Thanks

We just installed Creo in the class room, some computers operate correctly, others ( including the instructiors ) will close the toolbar after each operation. That is to say, I open sketcher, draw a line, wish to continue with another line, but the sketching options close. I must click on the sketcher tool everytime I wish to draw a line section. Does anyone know what is going on? It is quite frustrating and makes the software almost impossible to work with.

Dear PTC users,Want to know about customization in Pro E using Excel file.so, if any body have an idea of linking the excel file to Pro e means, Please let me Know.Thanks & Regards

To All,If anyone has recently upgraded to Creo 1.0, and was required to write a justification, could you please share some of the more compelling reasons that were deemed acceptable to the powers that be? We are just beginning to collect data to support our move. We had a demonstration from PTC (canned, of-course), and the User Group here was very impressed.I'm sure Creo 1.0 has its own issues, so we would hold for Creo 2.0. I would appreciate any feedback, thanks!Regards,Charlie Graham CAD Administrator Research & Development Stryker Spine 2 Pearl Court Allendale, NJ 07401 t. 201.760.8149 f. 201.760.8349 c. 201.694.1851 charles.graham@stryker.com

This topic was covered about 15 months ago, but I'd like to know if anythinghas changed with the advent of Creo 1.0: is it possible to open NX files inCreo 1.0? Is an expensive translation module still required?Thanks. (Please note that I'm specifically interested in Creo 1.0, notCreoElementsPro/Wildfire5/whatever it's called) -- Lyle BeidlerMGS Inc178 Muddy Creek Church RdDenver PA 17517717-336-7528 Fax 717-336-0514 <">mailto:-> - <">http://www.mgsincorporated.com>

hello proe pros...my question to you:is there a significant difference between proe wf 3 and creo 1.0 ?I'm still using wf3.regardsal.

hello proe pros...how can I change the current system language? The language that is used for all the menus, sub-menus, and so on.thanksal.using wf 3.0

Hi. I have a custom FN symbol that has a left and right "quantity" (i.e., allow users to enter 2X, 3X, etc...). Is it possible to make the default variable text empty or blank? It's going to get annoying for the users to constantly delete that text and I'm just trying to save them the headache.Thanks.

Here is what I received. We were able to use these as start points todevelop a table we will eventually use.

(If this is a duplicate, please ignore - I didn't see the original in the Forum.)I get the following Compile Error "Argument not optional." What argument is it missing?Sub async_test() Dim asyncConnection As IpfcAsyncConnection Dim cAC As CCpfcAsyncConnection Dim session As IpfcBaseSession Dim descModel As IpfcModelDescriptor Dim descModelCreate As CCpfcModelDescriptor Dim model As IpfcModel Dim sessionid As IpfcConnectionId Set sessionid = New CCpfcConnectionId Set cAC = IpfcAsyncConnection Set sessionid = CCpfcAsyncConnection.GetConnectionId() Set asyncConnection = cAC.ConnectById(sessionid) <<<<<--Highlights ".ConnectById" including the leading dot. Set session = asyncConnection.session End Sub

I have a Creo Elements Pro Student Ed W5 in my laptop. I can't press or use 'Boundary Blend' button no matter what i do. The button is only gray. However, the Creo Element Pro at school, the boudary blend button works. I know that at school they also use Student Edition. I don't know why it doesn't work in my computer. Anyone? thanks

Hello! everyone How to cancel proe backup fuction?

Please explain the logic behind "Add Point" & "Delete Point" options. It does not work as I expect. After I think that I have deleted points and then go to add a new point, I find out that the last point I selected did not delete. The more I continue to add & delete the more confounded the curve becomes and I almost always have to delete the whole curve and recreate it.Give me any suggestions that will save me from having to delete the whole curve in order to put new points in.example: PNT17 needs to be added to the curve.Thanks,Kevin

hi,I'm using the student version of pro engineer.it was working properly for nearly one month and,now it doesn't work..also when i open the parts created with this version with the educational version at school,it gives me error messages saying some objects created with the student version won't be displayed.is there anyway i can solve this problem...

I'm relatively new to Creo, although I have quite a bit of history with Pro/E in the release 2001 timeframe. I'm working with some simplified representations and attempting to save some screen shots (File > Save As > ...) of various states. However, the overlay that says "On-Demand Simp Rep: XXXXXX" is always hovering there and comes out in the screen shots as well. Is there any way to hide this overlay temporarily while I am making these images?Thanks,Adam

Hello,We are planning on upgrading to creo elements/pro 5 (build M090) shortly. We will be using it with PDMLink 9.1/m40We have evaluated this build and have not encountered any "show stopper" type issues. Before we "jump in", I was doing a last check to verify if you have encountered any issues either with Pro/E or with it's PDMLink interaction that we should be aware of.Thanks in advance for a prompt reply!Tom Hoganthomas_hogan@verizon.net

Hi,I downloaded the free version of CREO ( Creo Elements / Direct Modelling Express 4.0) today, and have been working through the quickstart projects to familularize myself.I cannot find the quickstart file needed for "position parts" (the file I cannot find is called wheels.pk2)I have searched in local disk (C:) > program files > PTC > Creo elements >direct modelling 4.0, but have been unable to find the file. Where is this file located? Is there something additional that I need to download?Thanks for your time.