IoT & Connectivity

Hi,           ThingWorx cannot read the bad quality data from Kepware?   Thanks Hema

I have a Thing with some properties from RemoteThings.The type of the 'IndustrialThing' property is Thing.Manually, I can set the value to 'ANOTHERTHING' if I want to, but I want to set it through a service using code. I've tried the code below, it gives no errors, but it doesn't work.  var params = { propertyName: 'IndustrialThing', propertyValue: 'ANOTHERTHING' }; Things['MYTHING'].SetPropertyValues(params);   

I have been pushing data from KepserverEx through an IoT gateway out to Splunk. The data tag name from Kepware remain pretty simple. However, when the data is pushed through the IoT gateway, the tag out includes the device, channel and original tag name. This causes unnecessarily long tag’s to appear in my splunk charts and confuses people who don’t know why that information is included. Is it possible to change the tag name and remove the long name that appears in the code for my splunk charts?

Hi all,Sorry if my question is stupid but i don't know anything about Micro FrontEnd architecture and technology.Do you know if it is possible to use Micro Frontend technologie to embed a thingworx application to avoid using IFrame? Thanks for your help. CB. 

I have project where I need to take a lot of labels for mashup from SQL.First, there are configuration mashups to create questions and their config.Then, there is mashup where customer chooses their setting, and radio buttons with questions depending on his are presented.I use for this radio buttons, and connect labels with reading text from SQL querry. Unfortunatelly, it means ca hundred SQL calls to read every data for every label. It takes time, >20 secs. And I'm looking for something more optimised, where I would call ONE SQL querry to read data, then split data from it to every label. Thought about storing whole SQL querry in some infotable inside properties of Thing, then services could read this data - but if two users will be working simultaneously, it can happen there will happen that infotable will be set with data for user A, then for user B, then both will use data of user B - so user A will have wrong datas.

Hello Community,   We are trying to enable SSO on Thingworx with AD FS. When we access Thingworx it throw below error message    [L: ERROR] [O: S.c.t.s.a.AuthenticatorExceptionHandler] [I: ] [U: ???] [S: ] [P: ] [T: https-openssl-nio-443-exec-19] [ The request was rejected because the URL contained a potentially malicious String "%25" ] [L: ERROR] [O: S.c.t.s.a.AuthenticatorExceptionHandler] [I: ] [U: ???] [S: ] [P: ] [T: https-openssl-nio-443-exec-10] [ Error validating SAML message ][ NameID element must be present as part of the Subject in the Response message, please enable it in the IDP configuration ] [L: ERROR] [O: S.c.t.s.a.AuthenticatorExceptionHandler] [I: ] [U: ???] [S: ] [P: ] [T: https-openssl-nio-443-exec-7] [ Error validating SAML message ][ NameID element must be present as part of the Subject in the Response message, please enable it in the IDP configuration ] [L: ERROR] [O: S.c.t.s.a.s.ThingworxSSOAuthenticator] [I: ] [U: ???] [S: ] [P: ] [T: https-open

Is there a way to update certificates through an API service for Kepware?Or another way to automate this?

As discussed here.   We are also using two KEPServerEX. One for Development and another one is dedicated to Production. Many of the times, we do not get data from some devices due to that.How can we solve this issue? Can we create an OPC connection between the two KWPServerEXs so that we can get data from devices in Development KEP without hampering Production KEP? --> can OPC aggregator be a solution in this case? If Yes then How?  

I have a device called EWON that send data to kepserver. Now I want to connect another Kepserver to that same device. Will that be possible? And after connecting I get error message as Date Time Level Source Event10/28/2021 10:16:58 AM Error KEPServerEX\Runtime Attempt to add item <device> failed.10/28/2021 10:16:58 AM Error ThingWorx Native Interface Error adding item. | Item name = <device>. Is that error message related to my query?

When importing Thing(Database or Mailserver) entity, configuration details are also getting imported.Tried different import options(disabling overwrite property values etc..) but existing configuration is getting replaced .Please let me know if it is possible to not disturb existing configuration.

Hi all, Our application relies heavily on custom extension widgets for showing large datasets in a card style layout.We understand the mechanics of using properties and events, but are not able make the 'services' part work.It would make development a lot easier if services could directly be triggered from mashup events. Currently we have a workaround to use change events on boolean property, but prefer to understand the 'service' method. Documentation on this is currently quite limited:Packaging a Web Component as a ThingWorx Widget - ThingWorx Web Component SDK - Polymer (ptc.com) Any suggestions to guide us is in the right direction would be appreciated, thanks in advance!

Hello Community Members, Using OData Services, I am trying to perform A Three Stage Action to upload a file into Windchill through Thingworx (9.5).Three-Stage Upload of Attachments to a Change Issue But after performing Upload Stage 1 Action I am stuck at Stage 2 Action.I have successfully uploaded the HTML file through Postman but cannot perform the same action from Thingworx services.Please let me know how to perform Upload Stage 2 Action Through Thingworx.I am attaching sample screenshots of Postman Call for Upload Stage 2 Action:Let me know if you have any queries.

I have one query regarding the project dependencies. I remove this dependencies but they come again when i come to thingworx. Can anyone pleasee let me know why they are coming even though they are not dependent on this project but still these dependenices which are other projects comes here.   

Hello,I am building a PoC, for Manufacturing plant, on top of AMU where we need readily available API documentation (Service and Thing details) to get the data, for exampleHow many machines have active alarmsWhat is the total downtime/Part Produced in a plant/AreaDowntime by Category in a plant/area etc. Note: I have already seen below links and there is not much technical details available:https://support.ptc.com/help/thingworx_applications/r9.5/en/index.html#page/thingworx_applications/welcome.html#https://support.ptc.com/help/thingworx_applications/r1.0/en/index.html#

I have empty columns in grid. How to filter the rows which doesnt have values using ptcchipdatafilter?

Webinar: ThingWorx and Vuforia Products Highlights Brought to You by PTC/USER - Tuesday, July 9th, 10:00 AM CDT ThingWorx offers a full range of new and updated features that enhance our core platform capabilities and help increase uptime, reduce cost, and improve efficiency across the enterprise. We will be covering these topics in the webinar.•    Smart Connected Products (SCP) Accelerator demo•    Digital Performance Management (DPM) example•    Remote Service Edge (RSE) for no-code edge development•    Vuforia Studio/ThingWorx use case with work instructions•    Vuforia Expert Capture AI trained step check REGISTER NOW

I have configured CWC with Work order module. After adding work order i can not access it in Execution tab.Kindly check attached image

Hello ,I have installed AMU and also uploaded the Excel Sheet. In Configuration>>EquipmentI am facing an  issue. I am no able to save the changes made in asset monitoring PFA

  How to read Texts from images in thingworx? is there any direct functionality to read texts? is there any extension available for this?  i have this link but for this need to install thingworx flow  https://support.ptc.com/help/thingworx/platform/r9/en/index.html#page/ThingWorx/Help/Integration_Orchestration/Azure/ComputerVision.html without thingworx flow how to get this done?      

Dear PTC Community, My collegue having an error "failed to start runtime in service mode. the service cannot be started either because its disable or has no enable device associated with it"  after adding few points in KepWare OPC Server. Attached image for reference. KEPServerEX 6 Need kind advice from community here that have experinced this issue and solved it.  Thanks,Nu'man

Hello, I am creating a mashup with a dropdown widget that is supposed to filter the rows of my grid widget by their "state". When I used a regular dropdown, it was working perfectly and the table only showed the results I wanted.  I want to switch to multiselect so that my users can click more than one state if they want to see results for 2+ different states at once. When I tried to enable this with multiselect, the grid widget in my mashup did not reflect the selections.  What should I do to enable multiselect and have my grid reflect all of the user's selections? Thank you!

I have a infotable in my things project, under properties and alerts, i want to display my infotable in a grid in a mashup, is that possible or only if i have a data shape?

When checking the exported PMML file of a model trained with just 1 neural net learner, configured to use ReLU, I'm noticing that all activation functions (apart from the output) are declared as logistic. How can this be? Maybe I'm interpreting the PMML file wrong, but I've checked the whole file and there's no mention of ReLU. I've done a lot tests and I'm not getting that parameter to change in the PMML file.

Hello I am using some customized fonts in our thingworx on premise instance and facing the language issues now after importing it .The issue is abrupt with some of the widgets where its mix of both the languages. Thanks

Hello I am trying to setup integration runtime and while doing so i am getting following errors [Client-EndpointMonitor-1] ERROR c.t.c.c.c.n.NettyClientConnectionFactory - Exception occurred while connecting to serverjava.util.concurrent.TimeoutException: timeout waiting for websocket handshake to complete Any help will be appreciatedThanks