Mathcad

So I have some Random words:I want them as "v" "w" "x" "y" "x"and "m" "n" "o"  etc. So I madeBut I want it to go through the loops!.I have no idea.

Representation of matrices in xy plots. How does it work ? Number of points >1200. Translated with Google Translate, Iuliana Nuta 25.03.2022     Darstellung von Matrizen in xy-Plots. Wie geht das ? Anzahl der Punkte >1200.    

Hi Team,I’m from Black & Veatch application team, we are planning to move the same License Manager servers from one location/region to another different location/region. We have some couple of questions below for the region :1) Is there any geographical issue while accessing the license from the different region?2) Any license configuration required after we move the server to the different region?3) And please let me know in case any technical dependency?Thanks in Advance.

Hi,I have an issue where I have a 5x7 Matrix that I would like to divide each element with the correlating value from a 1x7 vector (element 1,1 in matrix divided by element 1,1 in vector, then element 1,2 in matrix divided by element 1,1 in vector etc.)I.e. to simplify it would be like this:a= [1, 2, 3 4, 5, 6]b=[1, 2]c=[1/1, 2/1, 3/1 = [1, 2, 3 4/2, 5/2, 6/2] 2, 2.5, 3]I can't find the command to do this division (if it exists). Anyone that can help me?BR,Fredrik

See:  https://community.ptc.com/t5/PTC-Mathcad-Ideas/Feature-Suggestion-minimize-gaps-between-long-rows-when/idi-p/750196#M1313   In addition to the above, I've also noticed that Mathcad Prime extends the gap between the evaluation operator and an array when the array is showing the first rows of an array with a large number of rows.   More of a preference thing, but I think it would look better for the gap to be consistent.     Stuart

Hi  Issue with file as below. Prime 7 attached. I can't allocate the values to "Data" without doing the symbolic evaluation.  

I downloaded the Prime 8 express software but how do I license it? I have a Prime 7 contract that is good through 9/2022.

I am struggling to get MathCAD Prime 7.0 to multiply two sets of data in order to find a total area. I know that the solution should be simple, but I cannot find the right way to go about getting the program to output the desired information without running into an error.  The question that I am attempting to solve is attached and so is the PDF of my current workings on MathCAD. Any help or pointers would be greatly appreciated!

Hi, do you have samples of real-time graph data of global stocks link to yahoo finance for example any ticker li Apple?  

"Plotting failed. Replace complex values and NaNs by real numbers." Help! Not sure what this issue is here. (Pretty new to prime version of Mathcad.) If someone can take a look, can't tell if something is just formatted incorrectly.

The Minor grid lines and Tick Marks do not appear at all when using Log scale. This seems to be a bug. I do not know how to submit a bug report, so if anyone does - please submit one. Looks like everything about Log scale under Chart component has not been QC’d. I'm using the latest Mathcad Prime 6.0, but I believe this problem will also exist in Prime 5. If so, I can't believe this has not been caught during the last 2 or 3 years that they've put a lot of "focus" on graphing There is also very limited control over the Log plot scale, and sometimes, when playing with Minimum and Maximum under User-Defined Range, the scale displays something completely weird - as shown in attached screenshot. This is probably also a bug.  

HelloI wonder, how the operator ">=" works.As example:I have following termsThe resulet would be 0.922But now i want to add something:I want that mathcad calculates s_k. And if s_k is below 2kN/m^2 it should take the term "2kN/m^2" for sk. If it is above 2kN/m^2 it should calculate it normally like in the first picture. But it says s_k=0. I don't get itI really have no idea how to type this.. I hope somebody can help me  

Hi,   Assume I have a vector of 10*10. How to access one element from the vector in MATHCAD Prime. Say I would like to know 3*4th element in the vector. How to get the same

Good Morning,  I am encountering a problem with the attached file. I have created a sheet that solves siphon flow rate using a solve block. So far the calculator is able to solve for different heights (Z) if you enter this value.  Now what I wish to do is create a plot that shows the flow rates for heights varying between say 1 to 2 meters head. I have defined n number of points and created a function that returns a vector with the different heights in it this vector uses the index k and goes from 0 to n.  Now what I wish to do is run the values for Z through my solve block to get an output (V-out) which corresponds to each element of the vector Z. (e.g solve for 1m to 2m using the increments defined in the second sheet). This way I can create a plot of the values Z against the values V-out and show how the flowrate through the siphon varies with the available head.  Many Thanks,Callum 

Lets say I had a column of numbers (5 digits)71053711871237872678My required function wasf(7,1,’x’,”x”,”x”) =710537 and 71187f(“x”,2,”x”,”x”,”x”)=12378 and 72678f(“x”,x,”x”,”x”,”8”)=12378 and 72678f(“x”,x,”6”,”x”,”8”)= 72678etc What would be the best approach ?

Para uso estudiantil

Software installation is overly complicated and I need help with this.  However, when I connect through the chat bot and eventually get to a Case Logger page I find I am unable to actually create a support ticket for a variety of reasons. Please provide a link to where I can create a support ticket, provide an email, or phone number. My last option is to contact my license manager / sales person for help.   Thanks, David

I can seem to find a link or download page - or upgrade button within PTC MathCAD 7.   I already have a license/subscription.  

A funny comparison and maybe a hidden hint for the next Mathcad Prime version ...

Good Morning, I am trying to determine the exact x-location where the maximum deflection occurs. So far I have got a match function:  I wish to return the index k for which the displacement is maximum, the deflections have been calculated and stored in the vector delta-k. With the index found I can then determine the corresponding location where it is a maximum.  I know there are various topics available on this however I have not been able to get it working so far.  Thanks,Callum 

I need having Mathcad 15. I have trial of PTC Mathcad Prime 8.0

New release date for Mathcad Prime 8.0 (product calendar updated as of Dec 26, 2021):  

The belt pulls together two or three circles with D1, D2 and D3. What is the length L of the belt? If D1=D2=D3 L=D*(3+pi)   See also https://community.ptc.com/t5/PTC-Mathcad/Malfatti-circles/m-p/687281  

How to attack Wordle.

tried to download express - Thank You for Your Interest in PTC Mathcad ExpressIf you don't receive an email with a link to download your trial within two hours, check your junk or spam folder. After that no links arrive. Is there another location for downloading?