Mathcad

I have a vector of values and I would like to compare all these values inluced in the table in order to know if it is higher than 1.  I was thinking to use "if" but I don't know how to use it. 

I would like to write a user-defined function for Mathcad Prime 9.0 accessible via DLL. I intend to use 'C' programming language. Your supplied header file (excerpt below) refers to methods of function definition which will pass string pointers that are automatically parsed into file names with full paths as needed (#define INFILE 13). There is also discussion of assigning the function output to a file which will be written (#define OUTFILE 14). I would like to use this functionality. Can you supply working example 'C' code? In the worst case, maybe you can supply working 'C++' code. What I have tried, with the same construction as your examples for other passed-in arguments, as well correct memory allocation for output strings, has not worked. Of course, I don't know why and I don't think I have a way to debug this in real time since I don't have your object files (also I am a beginner C programmer). Thank you in advance for the example code. - Kirk Morgan ********// types to be

Mathcad prime 9 wont open past the splash screen, and closes afterwards. Ive looked the problem up on forums which suggested i delete the config file, didnt work either. Do you have any idea on how to fix the problem?kind regards

I'm used to it by now. Regularly, Mathcad loses the connection to the license for no reason at all I need to stop what I'm working on just because. Not to say that license management and activation steps must be among the worst kind of processes I have ever seen for a paid product.Not happy with the overall situation, this time things got worse. Lost license and Mathcad is looking for a "Product Code". Something I never got when managing licenses. When I read the articles about it in the below link:https://www.ptc.com/en/support/article/CS30357I get to a "solution center" which suposedly would provide me this product code. It seems like PTC is extending its bad support to a 3rd party now, but its the same quality of work:https://solutioncenter.digitalriver.com/public_csmI got the sales order, contract #, customer #, but this Digital River Solution Center does not recognize anything. Can anyone help? I can't use the license now. Below is the answer I got:"The inputted order number could

I have a very strange problem with this new mathcad. So the situation is that with a file of only 1.5 mb (something about 30 pages), page scrolling gets stuck and even when entering text (ctrl + T), writing a little faster, the text appears with a delay of several seconds so that it is impossible to In this case, work comfortably, I won't write about the rest because it covers only such basic functions. And the question is what is the reason for this functioning. A month ago I bought a new Asus TUF 15 computer but I returned it after some time because I didn't like it, now I have a new Acer Nitro 5 for a week and the problem is the same in both the first and second case, so it shouldn't be a hardware issue because I have new ones components good enough to work on 10 such mathcads at the same time.As for the rest of the actions I took, even when I switch Mathcad from AMD to NVIDIA (RTX 3050), the situation is the same.I will be grateful for an answer as to why the program behaves t

Hi I want to plot this summation. I would like to do it as an 'odd summation', were I don't want it to process n=2. Is there an easy solution for this problem? 

Migrated my Mathcad Prime 9 to a new Windows 11 PC, moved license to new Host ID, etc.  Prime 9 seems to work as usual.  But the Legacy Converter always fails and aborts - no message as to why.  The Mathcad Converter folder is present with what appears all the .dll's and the  mccnv.exe  executable.   Something else I need to do to bring this back to life?  

I can find in the User Help Manual the Mathcad API Workbook Object Commands to Pause and Resume a Calculation in a Loaded Workbook [ workbook.PauseCalculation() & workbook.ResumeCalculation() ] - but nothing else related to running / calculating a workbook after loading.  My Workbook is not automatically running / or calculating after being loaded into Mathcad Prime 8 by the Visual Basic program, and these commands do not appear to do anything to fix the situation.  What is the workbook command that will force the Mathcad worksheet to fully calculate after being loaded?

Hi PTC, my Mathcad 9 prime had licensed already. but some of the feature still cant use. you can refer snapshot below.  Please help me on this issue Thanks 

I'm trying to make a simple program to select values based on the Size variable.  But the use of "Size" in the program returns False.  However, if I assign Size to "x", and use it in the program, it works fine.  I don't understand why.  See attached. Thank you in advance.

I have created a solve block but the block only returns my guess value as a solution which is wrong.

Hi Team,We are trying to retrieve our license from PTC. But it was throwing INVALID HARDWARE error. Could you please take a look and assist on this please?

Prime 6 does not appear to have a way to produce a grid on a 2D plot.  Without a grid, plot values are difficult to read.  Hopefully this glaring omission will be corrected in Prime 7.  It would be good to have major and minor grid lines, of different colors and weights, but as a minimum the plotting features of MathCAD15 should be included.  A related helpful feature would be to be able to control the orientation of polar plots.  A current need is for a polar plot with zero degrees pointing to the left rather than to the right, with positive angles opening counterclockwise.  One could imagine zero degrees straight up, with positive angles opening clockwise, or other orientations and directions.   I posted this before and got a response to the effect that showing a grid is possible in Prime6 by way of some kind of plot editor.  But I can't find any such thing anywhere in Prime6.  If some tool is to be used, it would be helpful to know where

See snip below & attached. I'm trying to solve for z_pna, such that the sum of the tension forces equals the sum of the compression forces. 

Hi communityI don't know how to use prime to find solutions to a robotic problem this problem is based on matrix calculus for a serial type robot it is easy to determine the direct geometry, i.e. to express the generalized coordinates according to the joint coordinates The difficulty is to solve the inverse geometry, that is to say determine the coordinates of the joints according to the generalized coordinates usually this uses Paul's iterative method I don't know how to solve these equations with Mathcad see the attached sheet

I need SCN so I can upgrade to network seatsvbottone@pagethink.com

I have a license for Prime 3.0 and am re-installing on a new PC after a few years away from Mathcad and require a download link - is there one available? Thank you.

I have on average 30 to 40 large Mathcad Prime 8 worksheets that must sequentially open, calculate using input numbers from an ASCII text file, output an ASCII text file for input by the next worksheet, then save and close before the next worksheet is opened.  This is very labor intensive and I need to automate the process with a Visual Basic program.  It is critical that each worksheet recalculate while it is open, to deliver correct and updated results to the next worksheet.  I can get the attached example VB program to start Mathcad and open a single file, but I have not been successful in adding lines of VB code, that recalculate that worksheet after it is opened, and then save & close that worksheet with the changes, before opening the next worksheet - and doing it all again.  Help!  Obviously, I am not a programmer!

Hi, today I tried to install free trial version of Mathcad Prime 9.0. Instalation was succesfull, but i can't activate my license. Every time when I try to acquire my license it shows me this message "You have reached the maximum number license requests for your product type". What should I do?

Hi I've put together a series of Worked Examples using Mathcad. These are aimed at for Structural Engineers in Australia and New Zealand as they cover AS/NZS Standards, although the general principles apply globally. Smash the 'Like' button, share the show with your friends, subscribe to the channel and leave a comment. Regards Andrew

Hi,I created a student account about a week ago to get the 30-day free trial of Mathcad Prime, but I never received the email with the license.

HelloI have an activated PTC Mathcad Express on my new computer and I need to convert Mathcad 14 Worksheets.The converter give me a "no license" error.Kind regardsReto

Is it possible to locate a reference file in the right margin of the document?  The intent is to utilize the reference information in calculations but not show as part of the printed document.  An alternative seems to be including the reference file in a collapsed area; however, that results in a solid line across the page when printed.  If this is the best option to include but hide a reference file, is it possible to disable printing of this region?  Again, I'm not wanting this line visible when printing formal presentation documents.  In Mathcad 15, I could turn of the time line, date, etc. and then highlight the region with a light color that wasn't visible on the printed document. Thanks,

Does anyone know why I get an error message when I convert from MathCad 15 to Mathcad 8 prime or does anyone know what this printout does in general?   Translated by the Community Moderation using Google Translate -----------------------------------------------------------------------------------------------   Weis jemand wieso ich beim konvertieren von MathCad 15 auf Mathcad 8 prime bei diesem Ausdruck eine Fehlermeldung bekomme bzw. weiß jemand was dieser ausdruckt allgemein macht.

Hello, EDIT:I understand that in the first case I take for i a column matrix:   And in the second case I take: How to loop the n column matrix in t?