Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

Dear CommunityVersion: Creo Illustrate Professional 10.0.0.0 I would like to display the sequence step description on the published PDF.There is no setting to configure it in the PDF template:https://support.ptc.com/help/creo/illustrate/r10.0/en/#page/creo_illustrate/install_config_guide/Formatting_PDF_Publishing.html#Is there some workaround or hidden attribute to enable it? Best wishes and thanks for your help Alex

We are trying to compare the .cgm drawings and pdf drawings in Creo view, but the files are not loading.For .cgm it just blank and for .pdf it throws file is invalid. Also have attached file for reference  

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have a file which appears to be corrupted it should have 8 design sheets but it will only open 7 of the 8 sheets. The file produces the C++ assert failure which crashes Creo Schematics. We will recreate the design. But how do we prevent this as this message C++ assert failure, appears more frequently with Creo Schematics 7.0 (was never in Schematics 4.0). And the design has internal error 002 when you open it. But cannot do design check to repair because it gives C++ assert failure and crashes. How to resolve or work around this issue?Here are the errors that I facedInternal Error 002, C++ assert failure

Is there any way to propagate Creo Schematic drawing parameter to Windchill? Please suggest 

Hi, i'am using Creo Illustrate 9.1.Is it possible to rename the parts in the sbom with "use alternate part names" in a way, that a published U3D-file has the alternative part names?At his point this feature just uses them to display the names in the sBom, but doesn't really rename anything. 

How to add System Hostname To creo view watermark

All,Can Creo Illustrate open native Creo Parametric files such as assmblies, parts and drawings?Or does and export file need to be created in Creo Parametrics such as Step?Wayne

Hi Guys,Watermark which i created for lifecycle state and set as "Send to Back" it's not working it's still appeared in front of annotation and view. Regards,Aj

illustra publishes the CGM diagram, and the CGM diagram is garbled in Chinese after the PDF is released through PE;   ----------------------------------------------------- Subject - illustra发布成CGM图，通过PE发布PDF后CGM图中中文乱码 Body - illustra发布成CGM图，通过PE发布PDF后CGM图中中文乱码; - By Community Moderation Team -----------------------------------------------------

I have a Creo Illustrate Professional - Floating license, when I try to open it, it doesn't do anything. License server put the path of the license even nothing barir  

I have a 3D PDF that I received from the supplier. Is there any way that I can open it in Creo Parametric, similar to the Step file. Would it be possible to save that file in Creo Parametric?

Would it be possible to open a 3D pdf file saved as a pdf in Creo?

Hello, I have an error in creo view, when I open it. As it is in Portuguese. creo view lite has reached its memory limit and sewra has closed use a product version with the massive mount license option to view this data . We did the tests on another machine and it was normal, I already removed the program, I restarted the machine and nothing

Would it be possible to be able to open a 3D model of a part/subassembly in creo view from a drawing/BOM table also in creo view? If not is there any other PTC software (other than parametric or any of the actual modelling softwares) that could do such a thing? (Currently using Creo View Express 11.0)

Is it possible to add a picture (JPEG) in Creo schematics?

Hello to allWindchill is working on it using Creo illustrate. Previously, I was using Creo View Adapter to convert illustrater data without any problems.However, I found that it is an illustrater adapter.The document says that it converts illustrater data with this, but I don't know a separate difference.As a result, what is the difference between the Creo View adapter and the Illustrater adapter? I was wondering why the Illustrater adapter has a separate installation file.

I was wondering whether it is possible to have an interactive BOM table in creo view. The idea would be that if a user selected a part in creo view, it would highlight in the corresponding row of the BOM table (and, if possible, vice versa). Any sort of similar feature or function would also do.

I have a very large 14GB design.   I deal with sensors small things attached to structure so use a clearance filter to find it.   Once I found all the supporting mounting structure i deleted all the unused structure using the tools edit structure.  I have tried both delete viewables as well as advanced delete.There was no change.. I then deleted everything but 1 screw... Still a 14gb file... What gives I want to delete the actual items from the file not just a visible part number from the list. Please advise. 

Every callout that is put in looks like the picture. No numbers or quantity. Settings for the callouts look fine. Any ideas what causes this? 

I am using Creo Schematics 9.0 and Windchill 12.0. I want to load my central catalog in Windchill, set the Windchill path as a root folder, and access library items from Creo schematics. Is it possible? If it's not possible, what is the best solution to access the central catalog when users are located across the different geographies?

Hello;          I need to create dxf files from SolidWorks, & pull them into Creo for a cgm file output. One problem I had was the dim arrows are filled in SW & also in the dxf file, but when I import them into Creo they're not filled, thus not in the exported cgm either. The section line arrows remained filled, but all the dim line arrows were not filled. I posted a question in this gentlemen's YouTube post because the dim arrows are showed not filled in it as well. https://www.youtube.com/watch?v=33ZFv_szMAU&t=334s Thanks in advance for any input.Rob_D  Creo 4.0 M060

Hi Everyone, I want to create illustrations in creo illustrate in  some other language. Can someone guide me how to  go about it . I am using Creo Illustrate  10.1 Thanks in advance. Regards,Aditya Gupta

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0您好PTC 我想请问下在Creo Schematics中可变接插件的entry_port的值无法像name值一样自动根据序号更新名称(如：默认名称为Pin_#,序号为 1，自动更新后的名称为Pin_1)，请问有什么方法解决这个问题如果有解决方案请电话:15527705829联系加工或者邮箱：15071650294@139.com   Translated by the moderation using Google Translate----------------------------------------------------------------------------------------------- Hello PTC, I would like to ask about the entry_port value of the variable connector in Creo Schematics. It cannot automatically update the name according to the serial number like the name value (for example: the default name is Pin_#, the serial number is 1, and the automatically updated name is Pin_1) , is there any way to solve this problem?

Why are the selection sets restricted to a Figure... Why are they not like groups in Creoview that way I can use them in any figure. I know i can copy them but then i have to manage the copy all indivudually based on figure. I wanna organize things by Primary Structure. fluids electrical. ect...Why do you make it so difficult?  Do you even try to use  your own program to detect these frustrations?Or add an option to make it a universal group or figure based only for organizational purposes.

We have run across multiple assembly files that have specific mate functions established in the assembly, that show how the assembly should move. When we import the file into Creo Illustrate, it appears all of those mates are removed/broken. For a simple (and non-proprietary) example, we can reference this destaco clamp animation: Destaco Clamp Animation (youtube.com) In this assembly, the movement of the plunger is controlled through the linkages that connect back to the handle. All of these mates can be established in the native CAD file. But when we import the file into Creo Illustrate, we cannot easily recreate this movement, especially for more complex assemblies with hundreds of parts and hundreds of mates.  Is it possible to keep these mates from the native CAD file? Am I importing the assembly wrong into Creo Illustrate?