Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

Hi Folks, I have few question related to Creo schematics as below.1. How to restrict the terminal connections? is it automated or manual? 2. How to show the component label in 2Dschematics & 3Dcabling?3. Real time mass of Harness?4. Do we get the branded or industry standard catalogues like wise TE connectivity with 4 connection ports?5. How to we customize of create our own catalogue in schematics?It would be really helpful to get the answers for the above questions with specific examples if possible. TIANaresh

Does anyone know why the "Match whole word only" option would be greyed out in the Creo View Find tool? I am unable to find a setting to turn that on. I am using Creo View Lite.  

I have schematics design created in Creo schematics 8.0. Some connectors are located on sheet 1 and some are on sheet 2. Wires are connected between this connectors using highway.I have more than 3 sheets in this design and want to export selected components from two sheets in one xml. While exporting this design if i select "Selected",  components from active sheet only gets exported although i have selected components from second sheet also.I want components from both sheets in one xml but dont want to use "Export complete design" option. Is their any other way to do that ? Or is it Creo schematics issue ?

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0Not able to map the path which I want to use for Central Catalog and Temp SubmissionHere are the errors that I facedGetting network error

Hello everyone,I'm not an expert Creo View user and I'm trying to find a way to obtain the minimum-size enclosure that contains a Creo part or assembly (or imported STEP files). In Creo Parametric you can set the Enclosure feature to "optimized" (from 11.0) or orient it according to a selected CSYS.I couldn't find a similar option in Creo View: when using Markup > Measurements > Envelope, the bounding box is always created according to the default CSYS. In the attached picture you can see a practical example where my part's CSYS is not oriented according to the minimum-size envelope/enclosure.Am I missing something? Thanks.

I have an assembly opened in Creo View and all of the sub-assemblies show up fine in the structure tree. However, in the model tree it will only show the top-level assembly that I have open. I would like to select parts in the graphic window and have them highlight in the model tree, like how it works in Creo Parametric.  I have tried reloading the branch links of the top-level assembly in the model tree, and the next level of sub-assemblies' link correctly, however as soon as I go to the structure tree and come back to the model tree, all of those links disappear. If anyone has any ideas how to fix this I would definitely appreciate it!

Dear CommunityVersion: Creo Illustrate Professional 10.0.0.0 I would like to display the sequence step description on the published PDF.There is no setting to configure it in the PDF template:https://support.ptc.com/help/creo/illustrate/r10.0/en/#page/creo_illustrate/install_config_guide/Formatting_PDF_Publishing.html#Is there some workaround or hidden attribute to enable it? Best wishes and thanks for your help Alex

We are trying to compare the .cgm drawings and pdf drawings in Creo view, but the files are not loading.For .cgm it just blank and for .pdf it throws file is invalid. Also have attached file for reference  

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have a file which appears to be corrupted it should have 8 design sheets but it will only open 7 of the 8 sheets. The file produces the C++ assert failure which crashes Creo Schematics. We will recreate the design. But how do we prevent this as this message C++ assert failure, appears more frequently with Creo Schematics 7.0 (was never in Schematics 4.0). And the design has internal error 002 when you open it. But cannot do design check to repair because it gives C++ assert failure and crashes. How to resolve or work around this issue?Here are the errors that I facedInternal Error 002, C++ assert failure

Is there any way to propagate Creo Schematic drawing parameter to Windchill? Please suggest 

Hi, i'am using Creo Illustrate 9.1.Is it possible to rename the parts in the sbom with "use alternate part names" in a way, that a published U3D-file has the alternative part names?At his point this feature just uses them to display the names in the sBom, but doesn't really rename anything. 

How to add System Hostname To creo view watermark

All,Can Creo Illustrate open native Creo Parametric files such as assmblies, parts and drawings?Or does and export file need to be created in Creo Parametrics such as Step?Wayne

Hi Guys,Watermark which i created for lifecycle state and set as "Send to Back" it's not working it's still appeared in front of annotation and view. Regards,Aj

illustra publishes the CGM diagram, and the CGM diagram is garbled in Chinese after the PDF is released through PE;   ----------------------------------------------------- Subject - illustra发布成CGM图，通过PE发布PDF后CGM图中中文乱码 Body - illustra发布成CGM图，通过PE发布PDF后CGM图中中文乱码; - By Community Moderation Team -----------------------------------------------------

I have a Creo Illustrate Professional - Floating license, when I try to open it, it doesn't do anything. License server put the path of the license even nothing barir  

I have a 3D PDF that I received from the supplier. Is there any way that I can open it in Creo Parametric, similar to the Step file. Would it be possible to save that file in Creo Parametric?

Would it be possible to open a 3D pdf file saved as a pdf in Creo?

Hello, I have an error in creo view, when I open it. As it is in Portuguese. creo view lite has reached its memory limit and sewra has closed use a product version with the massive mount license option to view this data . We did the tests on another machine and it was normal, I already removed the program, I restarted the machine and nothing

Would it be possible to be able to open a 3D model of a part/subassembly in creo view from a drawing/BOM table also in creo view? If not is there any other PTC software (other than parametric or any of the actual modelling softwares) that could do such a thing? (Currently using Creo View Express 11.0)

Is it possible to add a picture (JPEG) in Creo schematics?

Hello to allWindchill is working on it using Creo illustrate. Previously, I was using Creo View Adapter to convert illustrater data without any problems.However, I found that it is an illustrater adapter.The document says that it converts illustrater data with this, but I don't know a separate difference.As a result, what is the difference between the Creo View adapter and the Illustrater adapter? I was wondering why the Illustrater adapter has a separate installation file.

I was wondering whether it is possible to have an interactive BOM table in creo view. The idea would be that if a user selected a part in creo view, it would highlight in the corresponding row of the BOM table (and, if possible, vice versa). Any sort of similar feature or function would also do.

I have a very large 14GB design.   I deal with sensors small things attached to structure so use a clearance filter to find it.   Once I found all the supporting mounting structure i deleted all the unused structure using the tools edit structure.  I have tried both delete viewables as well as advanced delete.There was no change.. I then deleted everything but 1 screw... Still a 14gb file... What gives I want to delete the actual items from the file not just a visible part number from the list. Please advise. 

Every callout that is put in looks like the picture. No numbers or quantity. Settings for the callouts look fine. Any ideas what causes this?