Other Creo Products (View/Sketch/Illustrate/Layout/ Schematics and Creo Direct)

I am using Creo Direct 4.0 M1300in Assembly drawing view few of the component edge lines arent coming properly. view shows broken lines of sub-components.I tried to bring those lines visible by changing the view display style in the drawing but no luck with any of the options. I couldn't able to find any other solution to this issue. Kind request to take this on priority and provide the solution.

Hello, I hope I'm in the right place.I use pvsoptimize.exe (included in PTC CREO viewer) and I have a problem.In logs, it's indicated that "C:\Program Files\PTC\Creo 7.0.0.0\View\x86e_win64\obj\libpvgltfwriter_vs16.dl" not found. Could you say me if this .DLL is from PTC Creo view or not ? Do you have it on your computer ? Many thanks in advance 

I am using Creo Direct 2.0 M030Hello, the three-dimensional ××××.prt of simple model, the three-dimensional ××××-DE.prt of complex model and the two-dimensional ××××.drw of complex model can be uploaded and linked to the part under ×××× , Whether changes, integration and other functions have any impact   Translated with Google Translate Translated by Iuliana Nuta on 12.Nov

When we switched from WF4 to Creo last week, we also upgraded the settings for the publishing machine and put a local copy of Creo on it. Went through the Adapter.pvi and the Workder.rcp files and updated them to work with Creo2. We were already running the CreoView Adapters, so the only change was Creo2 from WF4. When we start the GS Worker as a service creo will not launch. The GS Worker is calling WorkerDaemon.exe. If I open a command prompt and run WorkerDaemon manually, then I can get Creo2 to start from the Worker Agent Administration window.Has anyone else had this issue with Creo2 or CreoView? PTC seems stumped on my open call.Going to cross post this to other groups for better coverage.

Is there an option I can't find or something? When I export a part to PVZ format and open it in Creo View, all annotations appear, except ones set to flat to screen. Any tips?

Soon I will use the software, as well as for the preparation of spare parts tables, also for the preparation of assembly operating instructions.To do this, I will need to insert instruments / signals / consumables etc ...The question is:Are there any sites that can be downloaded? If so, how can I categorize them?PTC provide any packages for sale? (even only of a single sector instruments / signals / consumables / etc ...)ThanksMatteo

I am using Creo Schematics 3.0 M020使用flexnetlicenseserver11.16.2.1在server 2019上部署许可，但是在客户端获取不到许可Here are the errors that I faced 严重 Unable to obtain license for Creo Schematics

Hello to all,what is the publisher for Creo Illustrate?I noticed that from version 7.1 there is the possibility to install an adapter.It means that the windchill worker will create a pvz of all the illustrationscontained in the file.c3di or does it do something else?Where can I find this information? Thanks,Matteo.

Hi All is there a setting in CreoView to make the Section 3D Dragger to be in the Viewing Screen.   Currently when in section and you select the section plane to move the section the dragger is in the middle of the model. in our case the model is 85m long x 20m high makes it very hard when trying to section at component level.   would be good to have the dragger to behave the same as the Component Transform dragger see attached files   We are using CreoView 8.0   many thanks   David

I have a user that we just upgraded to View 7.1 Lite and when opening pvs file it will show the thumbnail of the parts, but nothing shows up in the main view area except the name of the node opened in the view tree when hovering over where the part SHOULD be displayed.

I am using Creo Direct 4.0 M100Cannot seem to install software and point it to a flex license server. Here are the errors that I faced Wrong MAC address is displayed when installing software. Cannot find where you can point the software during installation to the flex license server.

Hello community,   We have a project to mount a VMWare Horizon7 VDI platform. Our infrastructure have a latency greater than or equal to 150ms. I search but I wasn’t able to found any answers on the Community. So could you help me please about the applications : "ProductView (9.0.M120)" and "Creoview Lite (4.1-F000_64b)" Do you know if you have any issues about latency and/or VMWare Horizon 7 with this products ?   First, is there a topic I missed that talk about it ? Or do you know if some prerequisites are needed ? or the minimal network bandwith requested ?   I just need a confidence score, to know if it's possible or not and have some documentation about it.   Many thanks in advance for your help,

When I try multi sheet drawing comparison for .PVZ format, comparisons window shows only half of sheets. not showing full drawing comparison. Looking for help on this from experts.

When I open up prt files into Creo View the screen is black and the designs are white and blurry. How do I fix this issue?

I am using Creo Schematics 3.0 M020We have the below Creo Schematics / WGm / Windchill.We find issues when we try to use WGM/Creo schematics on our company VPN, when we connect Creo Schematics/WGM to windchill using LAN/Ethernet it works fine, when we connect via VPN, it fails to open the dataset (.RSD) file, it says file is outdated. After that even if we try to reconnect using LAN, it does not work, only way is to re-install the Schematics software. Is this a known issue??WGM: M030-CPS17 Release 11Schematics: Version 3.0, Datacode: M020, Config ID: 1A1614522Release: 11.0 M030-CPS18 Products InstalledCreo View - ClientsCreo View - AdaptersPTC Windchill PDMLink 11.0PTC Windchill 11.0 Information Modelerwindchill 11.0 Serviceswindchill 11.0 mpmlinkwindchill 1.7 REST Serviceswindchill 11.0 help centerwindchill 11.0 service packwindchill 11.0 platform structureswindchill 11.0 info*enginewindchill 11.0 common baseVRD LSA Foundation Template - Extended1.4 Installed Locales: There is no non-

Hi all   I am exporting my 3D figures as SVG to edit/add lines in Adobe Illustrator and I include image in the export. Now I experience that transparency of parts is lost after export. I recently updated to illustrate 8 from 7 and this was not an issue before, any idea of what setting could course this behavior?   Transparency is fine when I export to PDF or PNG.  Pictures show difference between view in creo illustrate and the exported SVG in Adobe illustrate.      

Hello to all,I'm trying to generate the BOM from Creo View by adding some attributes, in addition to the default ones.For example, I added the Epmdoc_lifeCycleStete attribute which comes from Windchill, but I realized that all the complete attributes, including Epmdoc_lifeCycleState, are present only in the assembly or in any case in the component I open first and not in the assemblies and components of the sublevels .Is there a way to load and visualize the attributes of all these objects?(attached some more specific images)

I am using Creo Direct N/A N/AUsers not able to use CREO Here are the errors that I faced I restared the service and ran PTCSTATUS.bat to see if that fixed the issue but Users still not able to login.'

Is it possible to create multiple planar sections in a figure? I would like to show only the two ends of a pipe. I have attached a image that shows two planes (for visualization), the componentes between the planes are the ones I want to remove. I was not able to achieve this with the sectioning tab tools. 

Hello to all, I'm trying to set up a color code search to view the life cycle states of my Windchill WT PARTs in Creo View. As you can see in the Windchill structure (in image 1) the WTPARTs are in state: Encoded, Approved and Study. In Creo View I set the search with the part_lifeCycleState attribute and also tried with part_lifeCycleName (image 2). Maybe I am doing something wrong in setting this query because I have no result. Could you tell me the correct way?   Thanks , Matteo.   Grazie , Matteo.    

Is there a setting in Creo view to enable the 3d model annotation to be visible?

How to disable the print option in Creo View for drawing files representation for specific Life Cycle State. Is there a way to disable print option in Creo View for CAD part or assembly  or drawing in Released state

I am using Creo Direct N/A N/AHi Support TeamWe bought the Creo and try to install. First I already input the HOST ID and get license file. and try to Add my staff PC it shoe "Not Suitable"May I know what should I do ? Here are the errors that I faced "Not Suitable"

Hi All,   In CreoView when I open a new instance to view a model it will set the perspective mode active view FOV to 60 when the default is set to 110.   Anyone have any idea how to force CreoView to set the FOV without needing to manually change it every time.   Screenshots attached of options menu.   Cheers, Reece C

Dear team, I want to compress and expand the spring in illustrate, can any one guide me here.