PLM

Hi,  I have been asked to return a name value instead of an email address when in a report that collects who completed a task.Currently I use "Work Item.Completed By" but this returns who completed the task with the user's email address instead of their full name. Is there another attribute I can use that returns the full name instead of the email address?Or should I use a convert approach and if so how can that be done?TIA!

"I need to retrieve the parts from the BOM structure that do not have a CAD association. Once identified, I want to associate an empty CAD assembly with each of these parts. The CAD association for each part should be named based on the respective part."

I'd like to export automatically pdf and dwg files wihle publishing it on windchill.. For the moment I managed the pdf files export using "Presentation Export" tool. But not the dwg ones.In addition the dwg file in zipped folder as shown is there any way to manage these tow problems ?THANK YOU

I've developed over the years habits of separating various property changes into different xconf files that are referenced in site.xconf. For example, I have the following: configuration.xconf - For any value changes from the defaults, security label configuration, etc. customization.xconf - Registered Data Utilities, listeners and other customizations. wvs.xconf - Any properties changes that related to WVS service and wvs.properties. My goal was to keep site.xconf small and very close to static from when it was modified during the upgrade.  There are ConfigurationRef lines that bring this custom xconf files into the site.xconf to they propagate properly via xconfmanager. Recently, I needed a new xconf file (I think) for integrations. This would store username and password values for various custom integrations to other systems and databases. This file would be environment specific (PROD,TEST,DEV) and the passwords needed to be encrypted. I followed the various articles like&nbs

Hi everyone.  I am trying to add Affected End Items to a "Problem Report" report with Report Builder (Windchill PDMLink 11.1).  I have successfully done the same for a "Change Request" report using the below guide but this does not work in the same way for Problem Reports.  Can anyone help?  I need to know what kind of join and any additional tables to go between the Problem Report table and the Part Master table. (This is the link to the guide for Change Requests -> Affected End Items which works well.)Affected End Items Part Master Report (ptc.com) Thanks! Francis.

1. What product and version are you running?12.0.2.14 What is the problem & What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Is it possible to filter out only the assemblies/parts that have been marked as "Equivalent parts exist but do not point to the latest iteration"? I'm working with very large product structures (+10,000 parts), and there can be parts in 10 levels. Sometimes changes can occur very deep in the structure. I want to perform the check to see what has changed and determine if I need to allocate some changes to already existing manufacturing views.   Other Related to BOM-Transformers filter:Is it possible to filter only the assemblies that meet specific search criteria? The current filter does not seem to be working as intended; it does not delve deep enough into the structure. For instance, if I have a structure with five levels, and I attempt to fil

When i tried to create Cad document using WT part, it is showing following error: Similarly in Creo Integration: Advanced search:  Please help me to resolve this issue.  Ldap is gttc.com and EPM name prefix is com.gttc. Still this error is occuring. Will changing Object initialization rule effect any one from above . 

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.1.0After starting the Worker Agent from the Worker Agent management, pressing Reload causes the Worker Agent to stop.Could you please tell me how to deal with this?Here are the errors that I facedproe2pv 10.1.0 - Build: 20.1.0.0-PDUNS1 x86e_win64Copyright (C) 2000-2023 PTC Inc. All Rights Reserved.[2024-03-18 10:06:59] Starting ProE : proe2pv 10.1.0 - Build: parametric10000 20.1.0.0-PDUNS1 x86e_win64Copyright (C) 2000-2023 PTC Inc. All Rights Reserved.[2024-03-18 10:07:05] Connecting to server "HOST-NAME" on port 51772[2024-03-18 10:07:05] Connection established[2024-03-18 10:07:06] Registering as WORKER3 HOST-NAME PROECOMPLETE[2024-03-18 10:08:49] proe2pv Warning: Child lost connection to Parent

getting "fil in use by another process" when trying to save or import NX file to workspace using WGM12.1 and NX 1973  any ideas?   

I was in the "Activity: Use the CCD utility to send configurations to PTC" at page 704 and told to contact PTC Cloud support team to get instructions on how to send the opt folder structure. Please let me know when it is convinient for you. Thank you.

I'm fairly new to working with Profiles in Windchill.  In 12.1 I'm trying to work with the Standard Profile "Employee" which is defined as "Provides visibility to the Project, Product, Library, and Change Tabs but hides access to CAD data management functionality".  However it appears visibility to many CAD functionality options are enabled, as a matter of fact even the option "Create CAD documents" is enabled. In looking at the settings in 11.2 it appears that many of the CAD related options are disabled.  Wondering if these changes were intentional by PTC or just a mistake ?  About two months I created a case with PTC regarding this matter and didn't get any helpful advice. Other than document cs314954 has anyone come across a document which explains in better detail or which modules all the various options relate to ?  In the Profile I'm looking at the are over 400 options, as the PTC document list about 20 items only, most of which are self e

Having an issue with a calculated attribute on EPMDocument type to determine material thickness. Using attributes noted in CS324653 and using the supplied code for minimum model extent size  - the returned value  of the new attribute is not correct.  As an example - when looking at the values in /servlet/odata/v3/CADDocumentMgmt/CADDocuments('{CADDocumentId}')/Representations for a sample part - the value for 'BoundingBox' is:      "BoundingBox": [        -0.0533878,        -0.0673053,        0,        0.0860431,        0.441427,        0.009525      ],This data appears correct and are dimensions measured from the main part planes. For this example - if Az is BoundingBox[2] and Bz

Good dayI am new to Windchill and I am trying to synchronize my Windchill Revision numbers with the Documents.Let me give an example scenario below.1) Create New Document from local file - A.12) Document is edited by user until complete and checked in / replace content - A.23) Final draft of document is ready for review and approval, saved as pdf for review and signature. Document Checked in - A.3 and pdf sent out for Review and signature as A.3.4) 2 weeks later pdf is returned (reviewed, approved and signed as A.3)5) When i check it in as attachment to Document A.3 it then becomes A.4 but it is not A.4 it is A.3 Signed. What tips does anyone have to add attachments etc without changing the revision.? Regards

HI   I am performing similar kind of  export as per discussion here   can please share me the script ? all CAD Assemblies and CAD Components (Drawings, Formats and whatever can easily be added) but even so I used a direct dB sql select statement so that the script would have no limit on the number of objects it finds.   Regards, Manjunathj

I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.0.1The search function and object filter function, which should appear in the upper right corner of the UI along with "Click Link," are not displayed. "Click Link," show only. Therefore, the search function cannot be used. What is the procedure to make them visible and usable?

how should i get changeRecord2 from the wizard urlThe URL is this : wcdev.windchill.com/Windchill/ptc1/change/setResultantItemsAttributes?ContainerOid=OR%3Awt.pdmlink.PDMLinkProduct%3A2138737&u8=1&unique_page_number=58248588089754_0&AjaxEnabled=component&wizardActionClass=ext.sup.disposition.supResultantItemsFormProcessor&tableID=table__ext.mvctablebuilder.TableBuilder_TABLE&actionName=setResultantItemsAttributes&portlet=poppedup&context=comp%24ext%24OR%3Awt.change2.WTChangeOrder2%3A63753681%24&oid=OR%3Awt.change2.WTChangeOrder2%3A63753681&soid=comp%24ext%24OR%3Awt.change2.WTChangeOrder2%3A63753681%24OR%3Awt.change2.ChangeRecord2%3A63759524!*.

I am trying to customize the BOM export to PDF under the structures tab. Any changes I make to the XSLFO.XSL file do not seem do anything. I'd like to add the filename, company name/logo in the header and change the color scheme. Does anyone have any tips? Do I need to run a command to update the template files once they are edited?    

Some users are facing windchill error while searching the objects "get reader() has already been called for this request". This has reproduced after 3-4 weeks again. 

what is the need of SSO configuration if windchill is integrated with Active directory of an enterprise.?because if user uses the AD credentials to login to windchill , how exactly SSO is helpful? does not it ask for any credentials while logging in if SSO configured ? Is AD integration mandatory for SSO implementation on windchill?

We want to assign the object name 'TEST_S325.5_46HP' to attribute values. We have 3 attributes: 'customer', 'emission', and 'engine'. We assign 'TEST' to 'customer', 'S325.5' to 'emission', and '46HP' to 'engine' without underscores in the object name.

Hi there,  I am currently trying to perform watermarking in Windchill, using Adobe experience manager. I am currently able to watermark PDF's when creating a new representation using the Visualization Configuration Administration, by uploading a DDX Template that defined the watermark. I have a few issues.  These templates are uploaded at the context level, and watermark every document within the context they are uploaded to. I would like to only watermark certain type of documents, and be able to select from a set of watermarks based on attribution/or workflow values in Windchill. This solution only allows me to upload a single DDX template and uses that watermark for all documents. In summary, we have 3 different watermarks, and want to dynamically choose which watermark will be applied. It would be done automatically, or through user input.  Is there a way to dynamically assign watermarks to PDF's in my scenario? If there is a way to do this in con

I am using Windchill PDMLink Release 11.0 and Datecode with CPS N/AA message indicating that CCS registration failed was displayed during file server registration

Hello, Windchill Community!   The Community Team wanted to draw your attention to the new Windchill Customization board.  We have been working with some PTC Community Champions and Windchill active users on the community to help us strategize with our Technical Support Team on how to best connect community peers around discussions related to configuring and customizing your Windchill set ups.  We hope and are certain there will be some great knowledge sharing and solving of more Windchill questions.  Please read, contribute, and engage on the Windchill Customization Forum!    

Hello, when loading New Document, it gives the error shown in the picture.I changed the attribute of the document. I made All Attribute data types string. I keep getting the same error. Would you support?The template is in excel format. All attributes have been inserted.. Thanks Best Regards Selim AKCELIK 

when specific document created, we want to automatically create another document and attach as childIn the given code the child document which created automatically its failed to add as a child, and i tried with without linkage. The document is created automatically but after i tried to link it was showing error @Overrideprotected synchronized void performStartupProcess() throws ManagerException {super.performStartupProcess();System.out.println("Registering CreateDocumentListener listeners...");final ManagerService managerService = this.getManagerService(); managerService.addEventListener(new ServiceEventListenerAdapter(CreateDocumentListenerManager.class.getName()) {public void notifyVetoableEvent(Object event) throws Exception {System.out.println("DocumentDownloadListener notifyVetoableEvent POST_STORE ");CreateDocumentListenerManager.addChildDocument((KeyedEvent) event);};}, PersistenceManagerEvent.generateEventKey(PersistenceManagerEvent.POST_STORE)); } protecte