PTC Education

Hi Fokswhen trying to export this design as stl. its coming up 'Unable to triangulate highlighted surfsce. Aborting output'now this part has just been extruded and shelled, so what am I doing wrong?any help appreciatedJeremy

I have a sad tale to tell which may or may not befall others therefore I share it with you and hope someone can provide an answer.  Last week my old faithful AMD FirePro V4900 failed due to overheating because the fan failed. Finding out that is what had caused my m/c to crash turned out to be a detective story in its own right so no more on that.   Got a new card same make same model(?) installed it and configured with the latest drivers for same only to find PTC CREO 2.0 was very unstable and crashed the m/c.  AMD concluded a faulty card.  New card arrived installed and configured only to be presented by the same problem.  Eventually got it to behave by changing the graphics option in the config file to 'd3d'.  Works a charm, fast and stable, and all is hunkidory.  Check with Tim and find that, in CREO 3.0, Direct3D is not supported. What am I to do?  Upgrade or not upgrade that is the question. I think have another glass of Malt Scotch an

When I run creo 3.0 parametric, it comes up but along with a message display expressing the different viruses and problems it detected. It says the problems have been resolved, but it will not let me use creo and the program freezes. I cannot click anything besides the error message and have to end the tasks of the program. How do you get around virus protection so I can begin to use the software program?

More gearbox stuff from Shirley High School     (view in My Videos)

‌Hi, we have drawn a design for a stool, it starts as a truncated cone Upside down,  we cannot seem to turn the 3D part into a sheet material version to create a flat pattern.  Needed so we can construct it from Bendy Ply.  Does anyone know of any tutorials of demos around similar work?

Hey there. I have one problem with my creo parametric 2.0 and have sent some requests to ptc academic support. Since no one there is responding, I guess there must be some people in the community who would like to help me out ^^I was doing my homework and have to use Creo Parametric 2.0. When I opened it, there was a warning window and said that "License request failed for feature"got a nice pic hereseems like my license has expired. It was a license for student and last for one year i guess.So, can I extend my license somewhere or what can i do so that i could go on doing with my homework?Thanks a lot and have a nice day!

Hi All,How do we get Axeda Builder Tools?Is it available from free download?ThanksLomesh

Hello, one of mine PTC community mentor told me, that precisionlms.ptc.com is a great informations source. But l can´t login in anyway and don´t know how to obtain access to this source.Thanks in any adviceMilan

Buenas, he descargado la versión académica de PTC Creo 2.0 y no se donde obtener la licencia. Agradecería que me explicaseis donde poder obtenerla. Gracias de antemano.

Recent experiments with 3D printed gear boxes   (view in My Videos)

I need help guys. I am a new baby to Mathcad and was trying to solve equations using solve block but each time I do, I get error message. Can anyone tell how to do it?

Like the title says,  I am working through the training guide but was not given the files that all of the exercises refer to. If there is any way to get these, please let me know! I would very much appreciate it.Thanks

I am a Technical writer and am new to this tool-I need to find out how to use ISOdraw with windchill. I have worked through the tutorials which are included with the program but they did not help with importing and exporting.

Has anyone else been told by customer service that a script error in the Learning Connector is caused by Internet Explorer 9.0?Twice now, a Java update has causes errors with the online help part of the Learning Connector. This is a fairly recent occurrence but very persistent. The 1st time I contacted CS and when they connected to my computer it magically fixed itself (something to do with remote desktop... or something else not disclosed)... anyway, a few days later, another Java update installed and the problem exists again.This morning I get awoken to tell me that this is an IE9 issue and I need to downgrade to IE8 (This is a factory install of IE9 on Win7)...Last time I tried downgrading IE I lost a bunch of functionality. It basically toasted my entire OS (Windows XP IIRC).Is PTC really that far behind their programming efforts that they cannot even keep up with browser updates? Is their XML programming really that fragile? This just reflects very poorly on the fit and finish of

Hello!My CREO 2.0 Student Version license expired two days ago!Could you please help me to get a new license!Thanks in advance!Mario

Hi,How to get the installers and license for WildFire 5.0 student edition?Thank youYogesh

himy laptop was reformatted accidentally,all my programmed was deleted including creo2.how do I re download again without registering new user/

I started testing with PTC Creo Express and then I downloaded the student version and they are very different, can I get a student version of the express one?

Ich schaffe es zwar Creo auf meinem PC zu installieren, das Problem ist aber dass ich keinen Zugriff zur Bibliothek habe und dass das Programm auf Englisch läuft.

I want to thank Adrian for his patience in handling my requests for assistance.I will summarize my situation. I have TI SmartRF06 boards with TI CC2538 System-on-Chip (SOC) that include 6LowPAN radios for communication with a local router that can bridge traffic to the internet. These devices run an open source OS called Contiki which offers a quite rich programming environment based in a dialect of C. The OS includes support for Web Socket requests as well as ordinary http socket usage. I did not want to resort to the Thwx SDK for C if I did not have to. Based on a URL example from Adrian, I discovered that the Contiki API to pass a URL to the http socket used fixed strings whose default sizes were too small for the long URLs needed to make the REST calls.Like (actual APIkey removed):http://54.172.133.168/Thingworx/Things/RestTestThing/Properties/Prop_Humidity?appKey=<<myAPIKey-here>>&method=put&x-thingworx-session=true&value=91But I discovered where the sizes

HiCan anyone tell me why tp > (e-2mm) where:tp=20mme=22mmIt should be equal to each other!!!ThanksBest regardsWaleed Khalid

we are starting a project with the year 9 students to do shopping trolleysthis is the basic wheel they will be using .I am 3D printing at the moment and then they will construct their designs, after working them on Creo. This was my first model/Design on Creo 3,and I found it quicker and easier to use.

I'm new to the Starbase program. I have a couple of computers that CREO will open up. When you click the close arrow on the window that shows the starbase logo it doesn't close. If it does close and I set my directory and open an asm it shows it on the left but you can't see it on the screen.

I would like to have this available for our campus. Is there anything we can do to try and get the questions answered?Regards,Robert HazekampFerris State Unviersityrobhazekamp@ferris.edu2315913681