PTC Education

I've to install ptc creo for university. I've already used it on my pc but then when i had to reset it for other problems (not regarding PTC) i've tried to put back PTC  but it gives me a problem with the license. The setup says 'error' when i enter BE500806EDSTUDENTEDK12  as the license key and my personal email (it's not a problem of email/password because they are the same of this forum). I've tried to put manually the license i've got from the previous installation by email but it says ' File or format not valid'.   What can i do?    (The text in the photo is italian)

Hello,   After saving the configuration made in Academic Simulator in a json, using the option to save the configuration made previously, I tried to recover this configuration, but Academic Simulator does not finish the process, it remains in the "Loading things ..." screen for forever.    Is there any known bug with the Academic simulation around the configuration saved in json format?   Thanks,   Olatz

I have attached images below.   I'm trying to model a track for a garage door and the track is 1 inch away at the base of the door, and the track is at an angle of 1 degree. When I create the 1deg angle offset, it no longer allows me to create a distance constraint because it forces me to select two faces to do a distance mate. When I try to do that, it then over constrains my assembly because the distance mate wants the two faces to be perpendicular. All I need to be able to do is select the edge of the track as well as the face of the wood.   Does anyone have any suggestions to be able to mate this the way I am trying to?

I'm trying to do a revolve cut and for some reason the cut button is grayed out. What am I doing wrong?

I think my main question is why does Creo 5.0 not let me use angle offset in combination with a distance mate? I want to have an angle between two faces, as well as use an edge to fix the part in a distance from the base of the assembly. But I cannot select the edge to do a distance mate, it makes me select the whole face. And when I select the face it says the constraint is invalid because the distance constraint makes it parallel which takes away the angle constraint I applied. How do I select the edge in assembly mode? I have searched all over the internet for the answer and cannot. Apparently in Creo 3.0 assembly mode you could select an edge in a dropdown window when you are placing the part but Creo Parametric 5.0 does not have that.   I am very experienced with Solidworks and have only about a month into Creo. Creo is very un-intuitive to use and doesn't flow quite as well as Solidworks. Also there's not much documentation on Creo which isn't helpful at all either.

Hi I am currently having an issue with Creo, where everytime when i start typing a word, two letters (of the first letter) appear (for example: ffilename.prt)  It happens everytime - typing dimension, name of file, parameters etc. Iam running Creo 2.0 on Windows 10, even instaled two diferent versions. The only thing i have found is this https://www.reddit.com/r/cad/comments/9pa8dc/ptc_proe_double_typing_issue/  , but I am not using any Magnification app. Its so painfull to keep in mind that you have to delete the first letter everytime. I would be so grateful for any help. Tomas Burket

When I try to install Student Edition license is for Creo 4 despite I download Creo 5?

Hello everyone,    I tried everything and search google as well, but I couldn´t find a solution. In short, setup.exe doesn´t respond (I tried all 3 setup.exe files, noone of them worked. Could you help me?   What I did is below:    1-) downloaded the program (MED-100WIN-CD-420_5-0-0-0_Win64.zip - 4.01 GB) 2-) deactivated the virus program 3-) extracted it with 7zip 4-) runned setup.exe as administrator (there were 3 setup.exe, I tried the other two as well, none of them worked) 5) tried it with compatibility settings as as well. P.S: I also reinstalled Windows update for C Runtime.

Hi, im working on my Bachelor assignment and have done a 3D scan of a part. This part has an existing CAD part file in creo. I am going to compare my pointcloud with this prt file. Is there a way to do this in Creo parametric 5.0? Some way to use the pointcloud as an "overlay" to the original part file, to see the deviation between them? I need an accurate comparing between them, and was asked spesificly to use Creo as software. Thanks in advance for any help I can get!

Hi everyone, I signed up and I've created my account. Now I can't find this page. Please, could someone help me to fin The link? thank you in advance.

I HAVE DOWNLOADED CREO  3 STUDENT EDITION BUT THE LICENSE FILE RECEIVED BY MAIL IS NOT THE RIGHT ONE , NOW I CAN'T RUN THE APPLICATION

Hi, I am getting this error  " Could not dispatch async service request [NotifyPropertyUpdate] : Timed out APIRequestMessage [requestId: 195, endpointId: -1, sessionId: -1, method: POST, entityName: Am2302Thing2, characteristic: Services, target: NotifyPropertyUpdate]  "    when sending properties to a remoteThing from a Java Edge SDK program.  These is the link to the project http://www.thingworx.com/~/media/Files/PDFs/Academics/Raspberry-Pi-Temperature-Project-Files1.ashx?la=en. The Thing has a  RemoteTemplate and a Shape with two properties. I have bound the remote properties to the properties inherited from the shape.  It appears connected and the values are properly This error happens on an particular Amazon ThingWorx hosted instance. I could not reproduce it on a different Amazon hosted TWX instance.I am also getting this error " NULL MessageSynchronizationContext! Request either timed-out waiting for this response, or it was

I`m designing the peristaltic pump for my project. I want to know how much normal force would be exerted on the roller when the roller squeezes the tube.   To find the force value, i tried simulation and selected the surface of the tube, then Creo just select the all the surfaces of the tube. Could you tell me how to select the half of the cylinder or sphere surface?

In 2012 I bought Pro/Engineer Wildfire 4.0 Student Edition. It is purchase version with unlimited license. I didn't get a customer number or a service contract number to use the eSupport services. For this reason I can only use the support package "basic".   Because the computer, where I installed the program first time, doesn't work anymore, I want to use the program on a new computer. I installed the program at the new computer again. During the installation process I couldn't request a new license file because one was already taken. I tried it with the old license file but I think it is normal that it not works.   My question: What possibility is there to get a new license file (or exchange) or is there another way for further using the program?   Thank you for your help.   Günter.

Hey guys I just installed creo 5.0 but I am unable to use some things like creo render studioIt is showing that the license is not available I cant use the render studio so plz help me out guysThanks alot

Look CREO 3.0 on Windows 10Some kinds of problems like edges selection and the icons looks like fuzzy******Look CREO 3.0 on Windows 10 with this change in settings Windows CompatibilityI can see the icons in HD, and the selections works so good, like in Windows 7Thanks

I want to learn how to use Trail files and have been wasting hours trying to find out how.  I also would like some stable trail files that I can use to demo them in classes.  I have search in Creo help, in the PTC Community, online on various sites.  I've played around with it.  Nothing seems to work the way I expect it too.   Please someone save me from wasting more time on this.    I tried doing the "Play Trail File" and it doesn't work.  The trail file always exits the software.   - How to edit trail files? - How to play trail files? - How to ensure that the trail file stops before exiting the Creo Parametric so I show what the file did? etc.   Nothing is ever easy with PTC and Creo.  Ever.

I installed Creo 5.0 more than 10 times and I had already the same Problem. There is no mistake with the License or the Hardware (HP Envy i7 16GB Ram NVIDIA MX150).  So my Problem is: When I start Creo everythink is working, than I want to create a new profil or I want to spin the koordinatesystem. After this Creo doesn´t react, only jumps to the starting page and I can only close the window. I installed Creo 4.0, but I had the same Problem. My CPU is working, but Nothing except a White window.   Furthermore there is no error report. Have anybody an idea, what I can test or do different??   Thank you very much for your support.

Creo 5.0學生版許可證說“成功！” ，但沒有腔幫我謝謝！

Guten Tag, nach der Registrierung auf der Seite "http://www.ptc-de.com/de/academic-program/academic-products/free-software/creo-college-download" gelangt man zu einer Seite ("http://.../thank-you"), auf der die Installationsanweisungen für unterschiedliche Versionen verlinked sind.   Hier erhält man aber für Creo 3 einen falschen Link zur Installationsanleitung der Schools-Edition und nicht zur Student-Edition. Eine Installation der Student-Edition ist ohne den erforderlichen Produktcode aber nicht möglich. Bitte möglichst bald korrigieren...  

is there a certification offered for educators using the K-12 Creo software for the curriculum?

Hello everyone, I have a problem: for academic work I need to work on Creo 5.0 while i'm working at university labs, but on my PC I have Creo 3.0, which i'm using for other work. Is it possible to save a file in creo 5 so it's possible to open and work with Creo 3 after ?I tried to install Creo 5 on the PC but it seems it has problems.It is possible to have two versions of Creo working on the same PC (both academic licences) Thank you

Hello support team,  I just installed Creo 4.0 for academic use, license settings as shown in the pictures below. I'm using Cisco Anyconnect for the VPN connection to my universites internet. When inserting the license path during the installation, status was 'available'. When running Creo Parametric, connected via VPN, the error shown below accures. I already tried uninstall and install and tried without VPN connection. I also checked my firewall settings, settings attached below too.  Thanks in advance   Hannes

I am using Creo 5.0 and currently facing an issue that I am not able to connect to thingworx server to retrieve sensor data from the server. When I click connect to server it shows error "Connection to thingworx server cannot be established"  Please help me resolve this error. I have attached the screenshot of the configuration editor. any help is appreciated     Thank you  Ankit