Windchill

Hello All,Advance Search done with some criteria, Results fetched fine, but when it exports to excel file, the values are blank, it is intermittent for big search (more than 10k entries).Could you please check and confirm whether cascading attributes are being used?-- No Those are Global Attribute. Please check the screenshot below from the affected server where attributes show blank in excel.The attribute value as displayed in the I have attached the both the exported search result from Prod and Test enviroment.Could you please confirm whether the working and non-working servers are on the same release or on different releases?--Production and test environment with same Release 12.1.2.14.Please find the search file for issue.Thanks,Achal

While exporting the Structure BOM by selecting the “Multi Level BOM” option under the Reports tab, the BOM is currently exported with the report name followed by the Username and the current date. We would like to know if there is any possibility to export the file using the Number + Part Name instead.

HiI am trying to configure a 10.2 identical node type cluster with two nodes obviously one of which will be the active master.As per the Advanced Config Guide (http://support.ptc.com/WCMS/files/156979/en/WCAdvDeployGuide.pdf), the 2 properties that need to be set are:wt.rmi.server.hostname=Awt.cache.master.slaveHosts=B, C, DBoth these properties are set. But when I start Windchill, the MethodServer will start only on that node which is started first. For Ex. if I start Windchill on Node # 1 first, the Server Manager and the MethodServer both come up on it. But on node # 2 which is started after node # 1, only the Server Manager starts and never goes beyond the following line:INFO : wt.manager.CacheMasterNegotiator - Master stub retrieved: ServerManagerImpl$MasterServerManagerImpl_Stub[UnicastRef [liveRef: [endpoint:[xxxxxxx.xxxx.xxx:5002](remote),objID:[-2dd23186:148e7679245:-7ffd, -7282938796370177322]]]]No MethodServer on node # 2. If I go back to node # 1 and kill the Server Manager

We are currently planning for WTParts and we are trying to figure out how to manage attributes that are to be governed in SAP.  Our Current WorkflowFinished Goods (End Items) meetings are held to discuss necessary attributes to be entered into SAP   An Administrator fills out a spreadsheet with the required new finished goods. Sometimes there can be dozens of finished goods at once (even hundreds). The spreadsheet is sent to the SAP team for SAP import and part creation.Windchill Implementation AssumptionsWindchill/SAP Integration will be custom, 1 way (still to be developed) Some of the attributes for a Finished Good should not be managed in the WTPart, as they should be governed by SAP and any changes in SAP will cause a disconnect with the data in Windchill (due to the custom 1 way SAP Integration). We will be converting the current process from Excel and Email to Windchill. All attributes that were sent through Excel will be sent through Windchill. Windchill users will never want o

I need to populate the New Number field for thousands of parts/assemblies in Windchill. See attached example: The New Number simply needs to be the string between the first underscore and the file extension of the File Name field (red font). I hope I don’t have to individually copy paste each of these.  

I'm having issues with Windchill randomly booting me out of the renaming process of my files.More specifically, I'm trying to rename a list of new files in my Workspace before checking them in. When I start renaming them, Windchill will suddenly and without warning boot me out of the process which forces me to redo it again. It's getting really frustrating. I'm trying to replicate the issue. It seems using a combination of the Shift and Space keys on your keyboard seems to trigger it.Anyone else ever have this problem?

Getting failures applying this patch to my test environment on RHEL 9. Fails with following message:DEBUG 14-04-2026 13:21:37 - [java] java.lang.RuntimeException: Unable to write to byte cacheDEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.util.DiskCache.writeByteArray(DiskCache.java:191)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.CompiledClass.<init>(CompiledClass.java:118)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.JdtCompiler$CompilerImpl.createCompiledClass(JdtCompiler.java:344)DEBUG 14-04-2026 13:21:37 - [java] at com.google.gwt.dev.javac.JdtCompiler$CompilerImpl.process(JdtCompiler.java:306)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler.processCompiledUnits(Compiler.java:575)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler.compile(Compiler.java:475)DEBUG 14-04-2026 13:21:37 - [java] at org.eclipse.jdt.internal.compiler.Compiler

Hello guys , I want to hide Description attibute if it is not end item .it need to display only for end items .please suggest some approaches to achive it . Thanks !  

Hello ​@JC_Niyonkuru  Currently, classification is only supported for WTPart and WTDocument. Have you received requests for cycle classification from other customers as well (see below idea)? Is this feature planned for a future version of Windchill? I would need a response from you before deciding whether to add further customizations to the system due to the lack of a feature that already exists but is not available for all object types. Thank you for your attention Marco

Hello,In the legacy licensing model Base, Advanced, Premium, the Windchill Save As action was included in Windchill Base. Which license does this action correspond to in the new ePLM licensing model? Standard Author? Design Engineering Lite? Design Engineering?Thanks a lot Christian 

Creo worker recipe has option to generate PDF Compatibility Save as PDF/A-1.Do the same option available in Catia worker recipe?

Initially posted by @AP_11420411 on April 1,2026 Version: Windchill 12.0 Use Case: Using a Query Builder report (QML), how can we extract a complete list of all WTParts and their associated AML and AVL details across all Products and Libraries?Description:Using a Query Builder report (QML), how can we extract a complete list of all WTParts and their associated AML and AVL details across all Products and Libraries? This topic and some replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 3, 2026The Community team

This topic was initially published by ​@YA_12845300 on March 31, 2026 during the recent read-only period. We have manually republished it to preserve the integrity of the conversation. Learn more.The Community team Version: Windchill Below 11.0 Use Case: Hi, To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.Description:Hi,To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.

Version: Windchill 12.1 Use Case: Creating a demo workflow to show users that Revised items can be set from IN WORK to UNDER REVIEW at the start of the Change Request workflow.Description:Help please. Note a code guy.Just need a workflow robot to change the state of the Affected Objects on the CR that are IN WORK to UNDER REVIEW.We need the proposed changes to be locked so they cannot be edited while the Approval phase is happening on the CR. Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 3, 2026The Community team

Initially posted by ​​@bmüller on March 30,2026  Version: Windchill 13.0 Use Case: Test implementation of changes requested in https://www.ptc.com/en/support/article/CS466318 and https://www.ptc.com/en/support/article/466866Description:Hi, how can we test if the recent changes were applied correctly? is it enough to try a test URL like https://servername.local/servlet/WindchillGW/wt.wrmf.transport.httptransport.ReconnectedHttpURLCon;jsessionid=2df3/34 https://servername.local/servlet/WindchillGW/com.ptc.wvs.server.publish.Publish;jssession=234/sdf and receive a 403 Forbidden? Regards,Bernhard This topic and the replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 3, 2026The Community team

I am using Windchill PDMLink Release 10.0 and Datecode with CPS M010Critical vulnerability (CVSS10.0) in its Windchill and FlexPLM products. Want to add the immediate remediation steps but don't understand instructions.Currently have "D:\ptc\Windchill_12.1\HTTPServer\conf\conf.d\30-app-Windchill-Auth.conf" file. Do I simply create the new 90-app-Windchill-auth.conf and ONLY put the entry that was sent in the remediation or do I copy the 30-app file renaming to 90-app and have all of my configuration settings plus remediation??? Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team

Initially posted by ​@CM_10720949  on March 30,2026  the case and the emails we've received about these issues are not really coherent: In the email it's stated that: "If you have not installed the following CPS releases, we urge you to take the following actions immediately. CPS Releases:CPS F000 (Windchill Release 13.1.2)CPS01 (Windchill Release 13.1.1)CPS05 (Windchill Release 13.1.0)CPS07 (Windchill Release 13.0.2)CPS18 (Windchill Release 12.1.2)" while on the https://www.ptc.com/en/support/article/CS466866 it's stated:This advisory applies to all CPS versions So which one is correct? fyi we're on 12.1.2.18, and I've implemented the first mitigation, now i'm wondering if I need to do the second...  since email and CS are stating the opposite, here i am asking. This topic and the replies were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the conversation. Learn more.April 2,2026The Community team

Version: Windchill 13.0 Use Case: Hello, We are running **PTC Windchill 13 with **SolidWorks 2024 integration. Visualization files are generated through WVS using a SolidWorks worker. We are trying to optimize publishing load and would like to change the publishing strategy slightly. Our lifecycle is approximately: Concept → Prototype In Work → Prototype Released → In Work → Under Review → Released → Obsolete Goal During normal design work (In Work), every CAD check-in generates the visualization viewable (Creo View / PVZ). When the design leaves the In Work phase, the geometry should no longer change. Therefore the last check-in in In Work would effectively be the final viewable generation. After that point: the existing viewable representation should remain attached to the CAD document / WTPart it should simply carry forward to the next lifecycle states Later, when the object is promoted to Released, we only want to generate the final deliverables: PDF (drawing) DXF (if parameter DXF

Version: Windchill 13.0 Use Case: After enabling e-signature in the workflow, a user signature can be displayed in either a drawing template or a PDF generated by workers. Do I need a Creo customization, Windchill customization, or configuration specific to workers?Description:After enabling e-signature in the workflow, a user signature can be displayed in either a drawing template or a PDF generated by workers.Do I need a Creo customization, Windchill customization, or configuration specific to workers? Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.1Windchill and FlexPLM Critical VulnerabilityPTC has identified a critical vulnerability (CVSS 10.0) in its Windchill and FlexPLM products.This vulnerability could allow remote code execution by an unauthorized party and impacts all ver Some of the replies to this topic were published during the recent read-only period. We have manually republished the missing posts to preserve the integrity of the topic. Learn more. April 2, 2026The Community team 

Version: Windchill 13.0 Use Case: How to to auto clear the cache vault once the files are moved to the master vault in windchill?Description: How to to auto clear the cache vault once the files are moved to the master vault in windchill?

Using the attached QML, I was able to retrieve the users assigned to their respective licenses. However, the report is also returning the associated team roles along with the license or group names to which the licenses are mapped.Do you have any suggestions on how to exclude all team roles from the report? Although the criteria section technically allows filtering out roles, it is not practical to identify every possible role and create separate criteria entries for each one.

Version: Windchill 13.0 Use Case: To use the IFX library in the Creo for the Windchill fasteners and Also want to build standard fasteners library in the windchill from Fasteners available in the Creo IFX library.Description: Want to upload standard fasteners from the Creo IFX library to the windchill and also want IFX to fetch and use the fasteners form the windchill libraries when designer is using IFX tool in the Creo. But in the windchill the custom numbering scheme is configured for the standard parts in the windchill library. so also want to maintain that numbering scheme for the fasteners and they should be used by IFX library in the Creo when designer wants to assemble any fastener in his assembly.What configurations are needed to implement this functionality ? and how to do this ?Also is it possible to map the Creo parameter of the fastener parts directly to the windchill partslink classification attributes ? Versions : Windchill 13.0.2.6 and Creo 11.0.0.0

Version: Windchill 12.1 Use Case: What are the best practices / recommendations in terms part management practices? I'm interested what other organizations do, how many part types you manage and what they are. Our company is manufacturer / provider of industrial automation.