Windchill

Hello - Can PTC tell me if Windchill 12.1 supports using AWS s3 file storage in AWS GOV? Thanks, Ian Boulton. 

We have some CAD Documents that have been renumbered with an appended "-O" before their file suffix, i.e. "12345.CATPart" renumbered to "12345-O.CATPart" to avoid conflicts during an old migration. When we add a CATProduct with this file in its structure to a workspace through a WGM on a machine with CATIA V5 installed, the downloaded CAD data is updated and the structure reflects the renumber when we open it in CATIA. However, when we add to a workspace through WGM on a machine without CATIA installed and attempt to open the file in Enovia, the structure does not reflect the renumbered objects and tells the user that there are missing files.  This seems to have started after our upgrade to 12.1.2.6, though it's possible it was happening before and users just never reported/noticed it, as unlikely as that seems. Can anyone confirm that CATIA is required to be installed when downloading the content for the CAD data to be updated with the renumbered references? 

Our company is running Creo 8.0.6.0 with WindchillStandalone Windchill via Chrome, no problems.Windchill window on Chrome, laptop computer, laptop display, no problems.Windchill window on Chrome, laptop computer, extended to second monitor display, display problem.On the Creo browser (Chrome) There is a second Windchill window appearing atop the first Windchill window.  (See image) Also, if I am on the laptop screen and I drag the window over to the external monitor, then the problem shows up..

When viewing WC files using the add-in enhanced Windows File Explorer can displayed columns be locked in width?  Locked in my preferred sequence from left to right?Said differently, whenever I look at my WC-managed files can the default display always look like this:  

Hello, I need information on how we can create Program in Windchill using loadfile.

I am attempting to change the name and number of a WTDocument via SQL. It is my understanding that these values are shared across all iterations of a WTDocument and the values are saved in WTDocumentMaster. However, when I update the column of WTDocumentMaster, those changes do not reflect on Windchill. I also receive a persistence error when attempting to edit these documents via the UI. Is there any guidance as to how I can get the document name and numbers updated without causing issue? Thank you in advance 

If i can have a family table with a code number registered for each instance in my ERP system, what is the best option for PDM: have a family table with every single instance and its code numbers, and use it with repeat region in the drawing; or just put a handmade table on the drawing?

Hello, Is it possible to retrieve groups and roles of a deleted user? Thank you.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.0   Family file cannot be updated checkout Here are the errors that I facedIt could cause the family with ***.pattobecomeincompatible.   Translated by the Community Moderation using Google Translate -----------------------------------------------------------------------------------------------   I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.0族文件无法更新checkoutHere are the errors that I facedIt could cause the family with ***.pattobecomeincompatible.

This is a share not a question. As you can tell, I am revaulting my system to enable automatic folder creation and move data to a new volume. I've opted to feed the beast on off hours by altering vaulting rules and then revaulting so as not to impact users during the day. I needed a query to estimate the size of the job I was kicking off by context so I can control it. I started with this query from knowledge base: How to find vault file name and location of all objects in vault for specific context in Windchill PDMLink  I generalized to just give me a count but this only handles 3 object types, something was missing. Looking at HolderToContent table, I can see it was DerivedImage where most of my files are from which makes sense. Note this chart is in log scale so published content is about 10x everything else. Makes me want to consider flipping on publish as .pvz. Everything else is small potatoes so I did not include in my query so this gets the top 4 content items. I ran this

I am using Windchill Enterprise Systems Integration Release 12.1 and Datecode with CPS 12.1.0.0While Publishing the code, there is this ESI Error shows "Phantom CAD subassembly publication is not supported"Here are the errors that I facedESI Error shows "Phantom CAD subassembly publication is not supported"

Hello,   I have an attribute loaded for the WTChangeActivity2, and I want to map the attribute for the associated resulting objects of that change activity using Alias attribute concept. Please let me know the feasibility of doing the same.   Thanks in advance.   Regards, Sha

I have created a one custom mvc tablebuilder which invokes through jsp page. this table builder displays on single wizard page. this table builder is not fitting into a popup window after displays table there is a lot of empty space.

When you check the changes on a model into windchill, a version with the corresponding changes is later accessible in windchill. But if you find out a few versions later, that you e. g. want a specific revolve back in a certain place, how can you pick that up from the old version? Because as far as I know, it is not possible, to check out the old and the new version at the same time. And if you use several workspaces, then you can check out both but not work on them at the same time. I can not just go back to the old version, because I want to keep the majority of the part version that is up to date.

Hi all, Can you help me on how to create a custom picker which can retrive all versions of WTParts in the picker?I want to use this functionality via custom jsp page, is there any way to do this?  

I just added a couple of dozen files (~100k bytes each) to Windchill using the "drag and drop to Windows File Explorer" method.I can see these newly-added files in the File Explorer window that is enhanced by the Windchill add-in. However, I cannot see the newly-added files in the Windchill's "Navigator" HTML browser window.  Is there a significant sync delay (hours?) between these?Refreshing the Navigator browser window doesn't make any difference. The files are still not visible after 2 hours.  My internet connection is solid.

Hello community,I am trying to install MPMLink for Windchill, in the PSI installation i have arrived to the step where i need to locate the Windchill MPMLink in the Staging folder but i cannot find the correct installation folder in the PTC software download page (see picture). My question is where can I find the correct dowload file for the MPMLink, the Windchill version i use is version 12.1.1.0 Thanks

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS16How to get more info of failed Post Publishing job??Here are the errors that I facedPost Publishing Failed.Error Creating EPMDocument.

I will post some code below that works for me. However I would like to replace the 'testing' strings with a variable passed to the for each loop from the epmdocument group. I cannot figure out the syntax for doing this. If I place <ie:getValue name="CADName"/> where the variable is then I get an error when I execute. I am assuming I am supposed to do something like ${CADName} but, I am not sure how to reference that value?    <ie:webject name="Search-Objects" type="OBJ">           <ie:param name="INSTANCE" data="com.jbtc.net.mad1wc-prod01.Windchill"/>           <ie:param name="TYPE" data="wt.epm.EPMDocument"/>           <ie:param name="VERSION" data="LATEST"/>           <ie:param name="ITERATION" data="LATEST"/>    &nbs

I am using Windchill PartsLink Release 12.0 and Datecode with CPS 12.0.1.0Can we use classification attribute at CADDocument of AutoCAD.

When I drag and drop a file to my Windchill Documents folder using Windows File Explorer, the following Windchill Desktop Integration pop-up window prompts me to associate attributes with this newly introduced file.One of the attributes on which the pop-up seeks guidance is file name.  My first reaction is "the file name is obvious: the name of the file I just dragged in".But then I realized that Windchill is probably giving me an opportunity to rename the dragged-in file to something else, so I renamed the file to something else. But afterwards if I hover the cursor on the newly-added file using Windows File Explorer (which should give me the file's complete path including the file extent) I see my old file name, not the modified name.So my question is: why does the File Attributes pop-up give me an opportunity to rename a file if Windchill plans to retain the old file name?  Why would Windchill try to manage dual file names for the same file? 

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030I am unable to upload the CAD model to the windchill through Creo Parametric, getting error while the time of Checkin into the Creo.and the Creo workspace getting logout automatically.Here are the errors that I faced"Operation failed not connected to the server.""An exception has occurred in processing server response.""Check failed object details in Event Management.""This exception may corrupt the active workspace and may need windchill administrator assistance for resolution."

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.5i want to create one custom REST API to create a part in windchill actualley i have already created one rest api in swagger UI in windchill but i am getting one error as "error": "no response from server" so can you please give us some sample code for that.

I have been researching the ability to populate a WTpart with all sorts of attributes and then link documents to that WT using a described by link.  The end goal is to have these attributes show in many WTdocs without having to retype enteries (example: serial number, description, sales order, etc)  I can get the Help example: "describedBy@wt.part.WTPartDescribeLink~describes^wt.part.WTPart~name" to work perfectly....but when I try other attributes, like ones I have created, it will not fetch the information and display in the wtdoc.  What an I doing wrong?  I reached out to Tech Support on Monday, still waiting to hear anything from them. 

I've updated some files that are currently in my Resulting Objects list in Windchill. Is there a way to get these files to update to the latest version? It seems the files under the Resulting Objects list doesn't auto-update.  The only work around is to delete them and re-upload the latest version of the files. Please see attached screenshot for more clarity