Windchill

I created a report to find out when a user last logged in by using the "Audit Record" table. Now I want to filter out any user that is in a specific group. This group is called "Deactivated" and it would be the only group they are in if they are in fact deactivated. How can I create this filter in my report?   I tried putting a link the Audit Record table to the "User" table but it won't let me create one.

I'm new to this forum and looking for information on how to get started with the Windchill API. It is very difficult for me to get started. A few words in advance: I have been working as a designer with Inventor since 2008 and started programming Inventor at that time. Meanwhile I have also developed and released some Inventor apps. With VB.NET and VBA I know my way around.   My previous searches didn't give me a clue where to start. Which references do I have to set and is there somewhere a reasonable manual with an example. I checked the eSupport and found a lot of documents, but nothing that really helps at my actual point of skills. I’m not a Windchill administrator, only a user with some basic knowledge.   Now to my request. I want to check from an Inventor add in whether a file is checked out in the workspace or not.   What is the workflow and required tools to achieve the need information? Is there an API object tree to get an overview? I’m quite sure this are onl

Hello all,I have an ICN that is succeded as shown in Windchill. But when I check in KBM, there was nothing published. I can also see that the objects in resulting objects table are still in Approved state. This is wrong because once ICN is succeded, then all the state of the objects in Resulting objects table should be changed to Released State. Can anyone please help me how to publish these objects to KBM and why thus error occurs??

In setting up WTparts for Creo CAD files, we have the Number set to the name for the CAD parts. Not sure if this is OOTB or something in the OIR. When I check in with Auto Associate, I get the WTpart with the Name being the same as the CADpart name, but the number is a sequences driven number. We want the number of the WTpart to be the same as the name, just like the CADpart. I have looked at the OIRs for the existing system and both have references to a sequence number, so not sure what is overriding that. Is this a setting in Preferences?   I know I can turn off file extensions for the number, but this causes a conflict with drawing files. The part or assembly get checked-in and the file extension is dropped, but when the drawing goes to be checked-in, you get a must be unique warning. Is there some way to do this, too?   Windchill 11 m030 CPS16

Hi,I have a part that was created in the active window of an assembly, I used that assembly simply as a reference for some of the geometry created on the new part (hole locations) and that assembly has been deleted and removed from the session and windchill. I am now unable to check in my part because it says “cannot check in place holder document Assembly” then it names the assembly that I used as a reference which is now non existent. Is there any way to break off my parts dependency to this nonexistent ASM? Am I doomed to never be able to check in my part because it is tied to this deleted ASM? Surely there is a way that Creo can just redefine the holes in the exact location they are in and get rid of the necessity to be tied to the reference upon which the holes were created. I know the holes used that ASM as a reference but surely a computer program can just keep the holes in the exact 3D coordinate space that they are currently located in without needing to tie it back to the ref

Is it possible to Create 1 ECN  that refers to or encapsulates many ECRs raised on the same item. I have several ECRs raised on the same document. Currently 1 submission / approval of ECR creates 1 "Create Change Notice"  task in our Windchill 11.2 system. So I get a new document revision for each change request/ change Notice. I only want to have one revised version of the document  for the multiple change requests. How do I do this???

Has anyone installed the Windchill Enterprise System Integration ( WC11.1_ESI_BusinLogicSAP_MED-60420-CD-111_M020) on a Linux VM successfully?  We are trying to install ESI on a

Is it possible to update quickly a maintenance task in all blocks in a RBD at a time , this way not having to update one by one??   Thanks 

I have done some cursory tests and cannot get the system to default to blank when Parts are added to Affected Data.  I cleared the default value and I do have an Enumerated list of values for each Inventory Disposition column.  I want to ensure there is positive indicators of a choice for Inventory Dispositions, not just accepting the defaults. Ideally, I would like blank to show up indicating that nothing was selected yet. Tried restarting server but seems to always default to first value in enumerated list though blank is a choice on the row above in drop down.  I do not have a setting that value is required in constraints.

Promotion Requests out of the box have an "Owner" role that is the initial creator. What's really nice about this is that in the Members table, you can change the "Owner" in case someone else needs to take over future tasks that would have gotten assigned to the Creator.    We have other Workflows that use the Creator role in downstream tasks, but there's no way to change the Creator. At best, all we can do is reassign the individual tasks after they are created.    How can a Workflow be configured so that the Owner role shows up in the Members table and can be updated just like on a Promotion Request?

So the topic of materials has been discussed before in this forum, but I'm not sure there has been a solution I've been happy with. I was hoping someone can share their amazing idea on materials management that I haven't thought of. Here is the basic wish list - somehow connect between WindChill and Creo: Material Properties file Material Note in Drawing (soon in model for MBD) Material Finish in Drawing (soon in model for MBD) Detailed material in WindChill (like sheetmetal gauge.. etc) Detailed finish in WindChill Allow for material variations within Creo and WindChill (a part can have multiple colors) Allow for a material spec to be linked to these materials.   The goal is to not have the user edit the materials and finish 3 different times for three different places. Even if you don't have a magical solution to do all of this, if you have something that is 'unique' and you are proud of, I would love to hear it!   Thanks!  

Hi all,    I am currently developing a C++ toolkit customization for Workgroup Manager and I am using the workspace viewer (wwgmtkWorkspaceViewer_ptr) function getWorkspaceObjectByEpmName() to search for a specific EPM Document by its filename. From my initial testing, it appears that the getWorkspaceObjectByEpmName() function searches the current local workspace as intended, but also the Windchill commonspace which is not desired. Can anyone confirm this functionality and educate me on how to prevent searching commonspace?   If searching the Windchill commonspace is by design and there is not a workaround, does anyone know how to determine if the returned workspace object (wwgmtkWorkspaceObject_ptr or wwgmtkEpmDocument_ptr) was located in the local workspace or commonspace?

While performing a “Replace from Windchill” function from CATIA - In the next window, the Search Function doesn’t work as the one on WWGM main page. It only searched on File Name column. Could it be improved to behave like the "Search" function on WWGM main page, which search objects all major attributes? Thanks for your attention.

Hello,   Is it possible to open a drawing with creoview, from a browser by pasting an URL ? How to write this URL using the file name ? (xxx.drw)   Regards, Arnaud

Any pointers on setting up Altium management in WindChill/PDM Link.  Wondering how others are controlling their project files, libraries, sheets, and the like.    My use is WindChill 11 Altium 19    What I have noticed is schematics and boards are independent, when making them in windchill but in real life, they are not.     Hoping to shed some light on this.  Looking forward to where you all can point me.   

Hey all,   I am unable to delete a series parts and assemblies from Windchill as it claims they are being used by another assembly. The catch is, these parts are no longer in my main assembly. I have looked all over the place for the remaining references and am unable to find them.Is there any way to view these mystery references??I had an issue with a few other parts that were being remembered from "Replace Part" actions but that is resolved. I am certain this is not the issue I am currently facing.   Any help greatly appreciated.

A common complaint from our users is that they cannot tell what the task is related to when they are sent an Approval task email or an overdue email. Anyone know how to add the title of the CR in these notifications?    

Greetings,   I can't rename an instance. See attached. The generic and instance do not appear to be checked out. There are variations on versions within the table. Some may be -.2 and some b.7 for example in the same table. Someone had released certain instances at certain times. But new revisions were made. I don't know what Modify Identity Permission is.   Help,   Thanks   Wayne

Hello there,   when creating a change task the affected object tables are getting quite confusing when adding several objects due to the fact that the comments attribute is shown with several lines. See screenshot attached.   Does anyone know how to reduce the comments field to one line?   I tried to customize the table views, searched the type and attribute manager for layouts or input style methods but did not succeed so far...   Thanks in advance for your help!   Best regards Chris  

Hi,   I want to change the default object (part, asm) name on Creo to follow a certain rule. Based on Windchill documents, this is done via OIR admin. I've had a look at a lot of articles and dicussions in PTC community regarding Object Initialization Rule (OIR), and it all points to goto OIR admin, edit the .xml under type 'Part'.   Below is an extract from the .xml file. From what I understand, all I need to do is add a new line <Arg></Arg>  under id="number" with my new numbering format. This doesn't seem to be doing anything. When I create a new part, it still does the default PRT0001 and increments 1 for the next new parts. What am I missing here?     <AttributeValues objType="wt.part.WTPart"> ....... <AttrValueid="number"algorithm="com.ptc.windchill.enterprise.revisionControlled.server.impl.NumberGenerator"ignore="false"force="false"final="false"><Value algorithm="wt.rule.algorithm.BooleanBranch"><Value algorithm="wt.rule.

We are using Windchill 11.0 M030. We have several Products. 1) The Products that are no longer in use (MA & TC), but we want to keep in Windchill, should not appear in the search results. 2) We would like to hide the inactive Products and their contents from users.   Is there a way to hide a product and it's contents from users but they remain visible for Admin users?

Is there any possible way to recover an accidentally deleted workspace from wind-chill which includes only new parts (not uploaded)? please suggest if any. I have used the recovery tool wherein I could able to retrieve the assembly but no parts within that.thanks,Dinesh G

I have made a copy of the Part and EPM Document OIRs and made changes to the lifecycle used in them from basic to my customized lifecycle for parts. When I create a New Part in a workspace, it gets created but uses the two-phase lifecycle instead of my own. I am assuming that this uses the Part OIR, but maybe not and that may be driving the issue. Same when I create a New CAD Document, which I assume uses the EPM Document OIR.   If these are not the right OIRs to modify, could someone point me in the right direction?   Windchill 11.0 M030 CPS16

How to Display Windchill System attribute Drawing Revision and State in Drawing Templates.

Hi,   just received a mail about new PLM packages. Windchill Base, Advanced and Premium. But no more details. is there any overview online?    br Bernhard