Archive Read Only

I have a user defined parameter < UNITS > to capture Mass and Unit.  That information properly displays in my drawing MP repeat region table.  We now want this same information available in the model in support of MBD (model only).  Specifically, we would like to show a note that appears flat-to-screen in a combination state.  I tried applying < &asm.mbr.ptc_unit_units > in the note as well as dozens of other sequences - non work.  Has anyone tried this method for notes with success?

when  i want to check in the model ,there is  some incomplete CAD document bring to the workspace,the PDM system let me to check in the erro CAD parts.i want to know how to remove it from the work space ?

I am just getting started in Creo Version 2. What books and on line resources do people recommend?Thanks, Neal LewisP.S. If this got posted twice by accident, sorry. Neal

how do i open nx parts i have tried  *.prt

Bonjour,Existe t-il une manière plus rapide de transformer une esquisse de lumière en 2 cercles ?L'esquisse de départ est une lumière (1) et je souhaiterais arriver à 2 cercles (4), sans perdre la cote de 38 mm.Ma méthode a été de supprimer les 2 traits droits (2) , de placer 2 traits d'axes et d'aligner les bords des axes dessus (3) et enfin de compléter l'esquisse par 2 bouts d'arcs (4)----------------------------------Hi,Is there a faster way to turn a groove sketch two circles ?I would like transform an Initial sketch whitch is a grovve (1) as 2 circles (4) without lost cotation 38 mm.My method was to remove two straight lines (2), placing 2 axes and align the top edges of the axes (3) and finally to complete the sketch by 2 pieces of bows (4)

I wondering if someone can help me with a simple way to display the CG of a model.  I know in the past I have seen models that had a small sphere at the CG, but I have no idea how they placed it.

Trying to create a note flat to screen or any plane for that matter.  My note shows in the combined state detail tree but does not show up on the screen??  Also the note has the suppressed "box" next to it??3D annotation display is toggled on. How do I show the note? thanksPatrick Fariello

Any ideas about generating IDX files from Element direct?

Hi All,Can any one of you kindly provide a leaf spring data set if you have any. Regards,Avinash

Hello,        any one guide me how to sketch the wire rope?

Hello i need help with an easy task. I should do an curve witch i think exist of three arcs, but it should be done Exactly like in the first Picture(same symbols, same numbers and so on). As u can see, ON the two arcs in the first picture it is an symbol witch looks like a spline, what does it mean and how should I proced to make this like they do in the first pic?First Picture:http://imgur.com/rLLMPFr,N9hk6TySecond Picture (where I am)http://imgur.com/rLLMPFr,N9hk6Ty#1

We have a customer on Creo Parametric 2.0 M110. Occasionally their doc control person, who starts work before everybody else, cannot connect to their Windchill server. She cannot do any work until IT arrives. That is not the issue here, as there is no obvious cause for the issue. We have customers running on M150 with good luck. Are there newer builds than M150 that you have found to be solid, particularly with Windchill 10.2 M020? Or a build that you have had problems with?Secondary question: can you recommend a particular Creo 3.0 build?Thanks,Mark

Bonjour,Impossible pour nous d'afficher une section en mode ombragé dans un pièce (.prt) sur CREO3 La section s'affiche en dans tous les autres modes e visualisation (sans ligne cachée, lignes cachées et Filaire).Avez vous déjà rencontré ce prb?aucun prb sur CREO2 mais problème avec CREO3Merci pour votre aideCdlt,Bertrand

Hi!I´m running a model with contacts so the analysis must be non-lineal for best results.Then I must analyze the fatigue but CREO say I must select a previous lineal static analysis to do. So if I need both option. how it´s possible to do that with CREO or it´s not possible at all?Another issue is, my component has a pretensed bold, so I need a pre-load in the load set added to the main load. But CREO say it´s not possible to use large displacement analysis with pre-loads but I have contacts, so with CREO it´s not possible to do that kind of analysis (non-lineal/large displacement analysis + pre-loads + fatigue).Thanks for all the answer.Luis

Hello,I tried to extrude this arc, what happens is that it becomes in a really poor arc with no smoothness at all.What should I do?Thanks!

Hello,i noticed no differences between a volume rough with a roughing allowance from maybe 2mm and without. The output file is the same, when I use uncx01.p20 postprocessor.When I use Prof_stock_allow i see the difference clearly. Shouldn´t it be the same effect?And is there any correction for the diameter of the tool?In my case i have a simple square with a length of 20mm. With every rough_stock_allow there is the same way of 20mm, with a 3mm tool...Und nochmal auf Deutsch, wahrscheinlich kann ich mich da besser ausdrücken...also ich versuche ein Quadrat zu fräsen mit der Option Volumenschruppen. Egal welches Schruppaufmaß ich eintrage, der NC-Code ist immer gleich und gibt eben einen Weg von 20mm aus, obwohl er ja noch den Fräserdurchmesser beachten müsste und dementsprechend ein 23mm großes Quadrat ausgeben müsste im NC-Code...

dear team im mubarak alhemedi from Muqaries  uni and the i have massage like classed can you activates this programe pz thanks you

Is there a way to place a dimensions with 1 decimal and the tolerances with 3 decimals ( 152 +/- 0.025)?

Can Someone help me in understanding the concepts of driving dimensions and driven dimensions in Creo Drawaing dimensions.I want to know the basic definitions of these two terminologies.ThanksSachin

Importance of draft analysis

Mouse wheel not working for zooming in and out on Windows 10.0 Tech preview for Creo 2.0 .

Can I save file in Creo 3.0 to the version Creo 2.0?

@[ can be used to draw a graphic basic box around a value. Like this: @[@D@]Is there an equivalent for the inspection box also referred to as a "sausage"? I can't seem to find it if there is.

here how to set units permanently in creo as mmns or inlbs